Technical Parameters: Spec: φ2.4 x 10.3 in (Diameter: 6.2 cm x Length: 26.1 cm); Power: 2.2KW; Voltage: 220V; Current: 7.8A; Collet Size: ER20; Bearings: 4 bearings; Frequency: 300 Hz; Speed: 18000 R/min; Runout off: less than 0.002 mm. Mainly used for engraving machine or used with frequency converter.
ER20 Standard Collet: The collet of the CNC router spindle is quenched with manganese steel, and the runout is less than 0.002 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
1200 mm SBR16 Linear Rail Kits: This linear rail set includes 2 pieces of 1200 mm/47.2" long SBR16 rail shafts and 4 SBR16UU blocks. Sliding blocks to be used cooperatively with rails, smooth sliding provided by inside linear bearing.
High-quality Steel Material: CNC parts linear rails are made of carbon steel, linear Bearings made of GCr15 bearing steel with aluminum alloy housing. Surface chrome plating treatment beautiful rust-proof, hardness can as high as HRC62, more durable.
Complete Linear Rail Kits: This linear rail set includes 2pcs 86.5 in / 2200 mm long SBR20 rail shafts and 4pcs SBR12UU blocks. Sliding blocks are used cooperatively with rails, smooth sliding provided by the inside linear bearing.
High-Quality Steel Material: CNC parts linear rails are made of carbon steel, linear bearings are made of quality bearing steel with aluminum alloy housing. Surface chrome plating treatment beautiful anti-rust, high hardness, more durable.
This linear rail set includes 2 pieces of 1500mm/59" long SBR16 rail shafts and 4 SBR16UU blocks. Sliding blocksto be used cooperatively with rails, smooth sliding provided by inside linear bearing.
CNC parts linear rails are made of carbon steel, linear Bearings made of GCr15 bearing steel with aluminum alloy housing. Surface chrome plating treatment beautiful anti-rust, hardness can as high as HRC62, more durable.
Premium Quality Structure: 45# steel jaws, after high-frequency quenching, undergo improving the jaws' wear resistance and service life. Vise body for the HT250 high quality cast iron forging, which has good toughness, high strength, and durability.
Powerful Clamping Force: Vise guide surfaces are finely polished, smooth surface. When clamping the workpiece, the movement is stable, the positioning is accurate, and the clamping force can reach up to 19 KN, which is suitable for workpieces of different sizes.
Structure Upgrade: Masuter Pro is an All-Aluminum CNC router, which makes the machine sturdier than the last version. The Z-axis uses linear rails instead of the optical axis, this greatly improves the stability and accuracy.
Upgraded Controller Box: The control board is upgraded to a compact controller box. The emergency stop button and home button are more easily and more convenient to access. The control box is also dust-proof for easy maintenance.
New Version: Genmitsu CNC 3018-PRO is an upgraded version of 3018. With an integrated mainboard and custom software, communication between the software and hardware is seamless by design. 3018-PRO offers a large work surface of 300 x 180 mm x 45 mm. Spindle: 775 motor, 24V, 10000 RPM.
Built to suit your needs: If you are an experienced CNC engraving enthusiast looking for an upgrade, you can add the laser module kit to the machine. Or if you need extra working room you can add the Y-Extension and expand your work area. If you need to work with harder materials, upgrade your Z-Axis with the new all-metal carrier for larger 300W spindles.
***【 Guarantees & Honest After Sale-Service 】*** The CNC 3018 Pro machine with 5500 power module is the latest machine from Mostics Tech; Guarantee for this entire CNC Router is 12 months. Additionally, we provide technical support and fittings for life. Any problems, please be free to contact us. We have professional technicians here to help you solve any problems. (For instance, we can teach you how to better polish the finished works or help you to transfer G-Code)
【Updated Version】Newly designed 3 handwheels + Integrated Driver Chip + Fixed heat sink + External fan + Sturdy housing to extend the life of the control panel, Self-sufficient short-circuit protection.
[Outstanding Precision and Accuracy] The WM-3020 CNC machine is equipped with HG-15 linear bearings and 12mm balls crews on all 3 axes. These industrial components enable the carving to be faster, quieter, and more stable and precisely.
[Multiple Spindle Options] WM-3020 comes with a 300watt spindle, which is capable to engrave and cut wood, acrylic, carbon fiber, aluminum and brass. The z-axis is compatible with 65mm and 69mm spindle clamp, which means it is compatible with the trimmer routers such as DWP611, RT0701C, engraving module, and 1.5kw spindle.
Ideal CNC Router For Metal: Bigger and better with an all new extra rigid and beefy design featuring an increased Z Height of 72mm dual steel X axis guide rails, all aluminum spindle holder and 300W spindle. All these upgrades make metal carving easier, ideal for an endless variety of drilling, and carving operations on various metals, like brass, copper and 6061 aluminum, etc.
Much More Steady Z Axis: Upgraded linear guide structure and 4040 Y axis profiles highly improve the engraving accuracy and processing strength, eliminating Z axis wobble issues that most other desktop CNC machines have.
Low Interference: When the brush motor is running, no spark is generated, which significantly reduces the interference of the spark with the remote radio.
Low Noise: Without the brush, the friction during operation is greatly reduced, the noise is much lower, and the stability is greatly improved.
Super Size your CNC: This kit will extend your CNC‘s Y-Axis to 370mm(14.6”) and allows it to travel 320mm, easily convert your 3018 to a 3040. Note: The stock limit switch wire is long enough to accommodate the Y axis extension. In order for this to work you must move the X axis arms forward on the Frame far enough so that the Y+ wire can reach the Y+ limit switch, and then secure the X axis arms by tightening all 6 screws on each arm.
Compatibility: Perfectly compatible with 3018-PROVer & 3018-PROVer Mach3 CNC’s. (Note: Currently it cannot work on 3018-PROVer V2)
Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process;
EASY AND FAST TO INSTALL -We offer pre-soldered wire with aviation connector, it will take just 3 minutes to connect spindle motor to VFD.
Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process;
EASY AND FAST TO INSTALL -We offer pre-soldered wire with aviation connector, it will take just 3 minutes to connect spindle motor to VFD.
Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process;
EASY AND FAST TO INSTALL -We offer pre-soldered wire with aviation connector, it will take just 3 minutes to connect spindle motor to VFD.
【Simple and beautiful】: The scale of the VFD variable frequency drive panel is clear, easy to operate, simple and clear, displaying four digital tubes, you can clearly see the data, and switch between various display states at will.
【High performance】: The VFD variable frequency drive uses a high-performance CPU as the main channel and has a built-in RS-485 communication interface, which is economical, compact and versatile. The V/F curve can be set according to the load condition to maximize the power utilization efficiency, reduce motor heating, and extend the service life of the motor and inverter.
【Low Noise】The inverter adopts a unique control method to achieve high torque, high precision, and wide speed range driving. By optimizing PWM control technology and electromagnetic compatibility, it meets users' requirements for low noise and low electromagnetic interference, and is sturdy and durable. Rated voltage: single-phase/three-phase AC220V, applicable motor power: 2.2kW.
【High Performance】Using a large radiator design, bottom cooling fan + side double heat dissipation hole design, there is enough cooling space between the electronic components and the chassis, and the heat dissipation effect is better. It has good anti-trip performance and the ability to adapt to severe power, temperature, humidity and dust interference, greatly improving stability.
Low Interference: When the brush motor is running, no spark is generated, which significantly reduces the interference of the spark with the remote radio.
Low Noise: Without the brush, the friction during operation is greatly reduced, the noise is much lower, and the stability is greatly improved.
Super Size your CNC: This kit will extend your CNC‘s Y-Axis to 370mm(14.6”) and allows it to travel 320mm, easily convert your 3018 to a 3040. Note: The stock limit switch wire is long enough to accommodate the Y axis extension. In order for this to work you must move the X axis arms forward on the Frame far enough so that the Y+ wire can reach the Y+ limit switch, and then secure the X axis arms by tightening all 6 screws on each arm.
Compatibility: Perfectly compatible with 3018-PROVer & 3018-PROVer Mach3 CNC’s. (Note: Currently it cannot work on 3018-PROVer V2)
Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process;
EASY AND FAST TO INSTALL -We offer pre-soldered wire with aviation connector, it will take just 3 minutes to connect spindle motor to VFD.
Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process;
EASY AND FAST TO INSTALL -We offer pre-soldered wire with aviation connector, it will take just 3 minutes to connect spindle motor to VFD.
Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process;
EASY AND FAST TO INSTALL -We offer pre-soldered wire with aviation connector, it will take just 3 minutes to connect spindle motor to VFD.