3D Printers
10-10 of 400 results

Multibao PCI Parallel Port Card, IEEE 1284 DB25 Parallel Port to PCI I/O Controller Card Adapter for Engraver Printer

• Nice Transfer Rate: Built in SPP,PS2,EPP or ECP, compatible IEEE1284 printing protocol, transfer rate up to 1.5 Mbytes/sec, built in 16 byte FIFO. Plug and play, automatic IRQ and 1/0 address assignment. No switch and no jumper, easy to set up with software.
• 32 Bit Bus Design: 32 bit bus design, supports PCI 2.1 specification, with high speed I/0 controller (16C550C or compatible UART).

Multibao PCIe Expansion Card, PCI Express 1X to DB25 Parallel Port Adapter Card Compatible with IEEE 1284 SPP/Byte ECP Modes for Printers, Scanners

• The DB25 Single Port Parallel PCIe Card can be installed in a PCIe slot, allowing you to connect SPP/ECP/EPP parallel peripheral to any computer system. Relying on a native single chip design, this adapter harnesses the true capability of PCI Express – ensuring maximum performance and reliability.
• Native single-chip, single lane PCI Express,complaint with PCI Express base specification revision 2.0

OKBY PCI Express Parallel Card - Parallel Port DB25 LPT Printer to PCI-E Express Cards Converter Adapter Controller for Desktop

• 【Parallel PCI Adapter】: The PCI express parallel card accord with PC- Express1.0a standard. Pci-express's 25/s full duplex channel. You can buy it with confidence.
• 【Plug and Play】: This parallel port card support plug and play, which is very convenient to use. 1 DB25 print parallel port Interface. SPP.EPP.ECP compatible EEE1284 printer port.

ASHATA Expansion Adapter Card,PCI-E to 2 Serial Card +1 Parallel Port Card Desktop PCI Expansion Card LPT Port Adapter Card,Support for Windows 8/7 / Vista/XP / 2000 / Server 2003-2008 32/64 bit

• It is easy to allow more serial and parallel devices to be connected to your computer.
• Two 9-pin RS-232 DB9 external serial ports and one DB 25 external parallel LPT port.

ASHATA PCI Express Parallel Adapter Card,Parallel Port DB25 LPT Printer to PCI-E Express Card Converter Adapter,PCI Express to DB25 LPT Printer Converter Adapter Controller for Desktop

• 【Parallel PCI Adapter】Accord with PC- Express1.0a standard.Pci-express's 25/s full duplex channel.
• 【Transmission Rate】The parallel port transmission rate is up to 1.5 Mbyte/ second.

Dual-Serial 2 Port + 1 Parallel Port PCI Express Card, PCIe Serial Port, Parallel Port Combo Card PCI Express Card Compatible with 16C450/16C550 UART

• It is easy to allow more serial and parallel devices to be connected to your computer.
• Two 9-pin RS-232 DB9 external serial ports and one DB 25 external parallel LPT port.

ASHATA PCIE Parallel Port Card,PCIE to Parallel Port Card Print Port LPT PCI-E LPT Printer Card Adapter DB25,PCI to DB25 LPT Parallel Port Expansion Card For Windows, MAC and Linux.

• 【LPT Card】A PCI Express single parallel port card that can be connected to parallel devices such as printers, programmers, scanners, etc.
• 【Application】Can be connected to parallel devices such as printers, programmers, scanners, etc.

SUNGOOYUE DB25 LPT Printer to PCI-E Adapter, Parallel Port DB25 Printer Converter Adapter

• [PC-EXPRESS1.0a COMPATIBILITY] Upgrade your printing experience with our Printer to PCI-E Converter, which perfectly adheres to the PC-Express1.0a standard. Enjoy seamless compatibility and enhanced performance.
• [FAST AND FULL DUPLEX CHANNEL] Our product supports a high-speed 25/s full duplex channel, ensuring fast and efficient printing. Experience quick data transfer and improved productivity.

Richer-R GPIO Expansion Board, GPIO Expansion Board 1 to 3 Port Extension 40-pin Board Module GPIO Adapter for Raspberry PI 2

StarTech.com 1-Port Parallel PCIe Card - PCI Express to Parallel DB25 Adapter Card - Desktop Expansion LPT Controller for Printers, Scanners & Plotters - SPP/ECP - Standard/Low Profile (PEX1P2)

• 1 PORT PARALLEL PCIe CARD: Using a 1x PCI Express 2.0 Gen 1 slot, add a DB25 parallel communications port to your computer; Installs in full/standard or low profile PCIe cards slots (brackets incl.); Latest version of our popular parallel card PEX1P
• TECH SPECS: Parallel port LPT controller card supports SPP/Byte/Nibble/ECP modes | Compatible with IEEE 1284 | Speeds up to 2.5Mbps | Asix AX99100 chip | Full profile bracket pre installed

Multibao PCI Parallel Port Card, IEEE 1284 DB25 Parallel Port to PCI I/O Controller Card Adapter for Engraver Printer

• Nice Transfer Rate: Built in SPP,PS2,EPP or ECP, compatible IEEE1284 printing protocol, transfer rate up to 1.5 Mbytes/sec, built in 16 byte FIFO. Plug and play, automatic IRQ and 1/0 address assignment. No switch and no jumper, easy to set up with software.
• 32 Bit Bus Design: 32 bit bus design, supports PCI 2.1 specification, with high speed I/0 controller (16C550C or compatible UART).

Multibao PCIe Expansion Card, PCI Express 1X to DB25 Parallel Port Adapter Card Compatible with IEEE 1284 SPP/Byte ECP Modes for Printers, Scanners

• The DB25 Single Port Parallel PCIe Card can be installed in a PCIe slot, allowing you to connect SPP/ECP/EPP parallel peripheral to any computer system. Relying on a native single chip design, this adapter harnesses the true capability of PCI Express – ensuring maximum performance and reliability.
• Native single-chip, single lane PCI Express,complaint with PCI Express base specification revision 2.0

OKBY PCI Express Parallel Card - Parallel Port DB25 LPT Printer to PCI-E Express Cards Converter Adapter Controller for Desktop

• 【Parallel PCI Adapter】: The PCI express parallel card accord with PC- Express1.0a standard. Pci-express's 25/s full duplex channel. You can buy it with confidence.
• 【Plug and Play】: This parallel port card support plug and play, which is very convenient to use. 1 DB25 print parallel port Interface. SPP.EPP.ECP compatible EEE1284 printer port.

ASHATA Expansion Adapter Card,PCI-E to 2 Serial Card +1 Parallel Port Card Desktop PCI Expansion Card LPT Port Adapter Card,Support for Windows 8/7 / Vista/XP / 2000 / Server 2003-2008 32/64 bit

• It is easy to allow more serial and parallel devices to be connected to your computer.
• Two 9-pin RS-232 DB9 external serial ports and one DB 25 external parallel LPT port.

ASHATA PCI Express Parallel Adapter Card,Parallel Port DB25 LPT Printer to PCI-E Express Card Converter Adapter,PCI Express to DB25 LPT Printer Converter Adapter Controller for Desktop

• 【Parallel PCI Adapter】Accord with PC- Express1.0a standard.Pci-express's 25/s full duplex channel.
• 【Transmission Rate】The parallel port transmission rate is up to 1.5 Mbyte/ second.

Dual-Serial 2 Port + 1 Parallel Port PCI Express Card, PCIe Serial Port, Parallel Port Combo Card PCI Express Card Compatible with 16C450/16C550 UART

• It is easy to allow more serial and parallel devices to be connected to your computer.
• Two 9-pin RS-232 DB9 external serial ports and one DB 25 external parallel LPT port.

ASHATA PCIE Parallel Port Card,PCIE to Parallel Port Card Print Port LPT PCI-E LPT Printer Card Adapter DB25,PCI to DB25 LPT Parallel Port Expansion Card For Windows, MAC and Linux.

• 【LPT Card】A PCI Express single parallel port card that can be connected to parallel devices such as printers, programmers, scanners, etc.
• 【Application】Can be connected to parallel devices such as printers, programmers, scanners, etc.

SUNGOOYUE DB25 LPT Printer to PCI-E Adapter, Parallel Port DB25 Printer Converter Adapter

• [PC-EXPRESS1.0a COMPATIBILITY] Upgrade your printing experience with our Printer to PCI-E Converter, which perfectly adheres to the PC-Express1.0a standard. Enjoy seamless compatibility and enhanced performance.
• [FAST AND FULL DUPLEX CHANNEL] Our product supports a high-speed 25/s full duplex channel, ensuring fast and efficient printing. Experience quick data transfer and improved productivity.

Richer-R GPIO Expansion Board, GPIO Expansion Board 1 to 3 Port Extension 40-pin Board Module GPIO Adapter for Raspberry PI 2

StarTech.com 1-Port Parallel PCIe Card - PCI Express to Parallel DB25 Adapter Card - Desktop Expansion LPT Controller for Printers, Scanners & Plotters - SPP/ECP - Standard/Low Profile (PEX1P2)

• 1 PORT PARALLEL PCIe CARD: Using a 1x PCI Express 2.0 Gen 1 slot, add a DB25 parallel communications port to your computer; Installs in full/standard or low profile PCIe cards slots (brackets incl.); Latest version of our popular parallel card PEX1P
• TECH SPECS: Parallel port LPT controller card supports SPP/Byte/Nibble/ECP modes | Compatible with IEEE 1284 | Speeds up to 2.5Mbps | Asix AX99100 chip | Full profile bracket pre installed

Wood PLA Filament, kexcelled 3D Printer Filament, Natural Wood Fiber, Wood Effect, 1.75mm +/- 0.03mm, 1kg Spool (2.2lbs), Fit Most FDM Printer, Yellow

• 💫 SMOOTH & STABLE PRINTING: The dispersion process is used to achieve uniform distribution of wood fibers, eliminating agglomeration. The printing process is smoother, has no head blocking, excellent adhesion, and no warping problems at the best settings
• 🎄 GREEN & ENVIRONMENTALLY FRIENDLY: The WOOD series is based on PLA. By adding high-component natural wood fibers, gives a woody effect to printed materials and provides more realistic visual and textural expression in printed materials such as handicrafts and decorative items

Matte PLA Filament 2.85mm, kexcelled PLA 3D Printer Filament, Shine-Free Color +/- 0.03mm, Frosted Texture, 1kg Spool (2.2lbs), Fit Most FDM Printer, White

• 💫 SMOOTH & STABLE PRINTING: Kexcelled has a proprietary technical formula and rigid manufacturing quality control to make PLA K5M have no tangles, no bubbles, and no clog. Its performance is stable with smooth extrusion and excellent adhesion, without stringing and warping issues under optimal settings
• 🧵 STRICT QUALITY CONTROL: Enhanced impact strength and high fluidity enable you to print in wider temperature and speed ranges and keep the surface smooth without warping deformation. Accurate deposition of each layer brings good surface quality. Melt well, feed smoothly and constantly without clogging the nozzle

ABS Filament 1.75mm, kexcelled 3D Printer Filament, Excellent Comprehensive Performance +/- 0.03mm, 1kg Spool (2.2lbs), Fit Most FDM Printer, Gray Blue

• 🔥HEAT RESISTANCE: Kexcelled ABS filament provides high-temperature resistance (vicat softening temperature: 95˚C) to meet the requirements of industrial applications
• 🌟 PRINT UPGRADE: Upgraded filament improves warpage during printing and interlayer adhesion

PLA Filament 1.75mm, kexcelled Toughness Enhanced 3D Printer Filament, Dimensional Accuracy +/- 0.03mm, 1kg Spool (2.2lbs), 330 Meters, Compatible with 3D FDM Printers, Black

• 🛒 Commonly Used Basic Filament: PLA K5 filament offers excellent all-round print performance and rich colour expression, which can fully satisfy your creativity
• 🏅 Excellent Performance: Printing no warping, no bubbles, no clogging, and not easy to shrink and deform. Consistent colour and high dimensional accuracy of the finished product

Matte PLA Filament 1.75mm, kexcelled Upgrade Macaron PLA Roll, 3D Printer Filament, 1kg Cardboard Spool (2.2lbs) +/- 0.03mm, Matte Finish, Neatly Wound, Rattan Purple

• 🌻 New Color Series: Following the Morandi series, kexcelled has launched a new macaron series, which is a low-saturation color, unique and bright, bringing new inspiration to your 3D printing
• 🔮 Matte Texture: The surface of the printed model presents a special shine-free and frosted texture, with a noticeable improvement of the layer pattern. A good choice for printing decorative ornaments

TPU Filament 1.75mm, kexcelled 1kg Spool (2.2lbs), Flexible 3D Printing Filament, Shore 95A, Soft +/- 0.05 mm, Excellent Elasticity, Yellow

• ⚙ FLEXIBLE WITH SHORE 95A: Kexcelled TPU K7 95A is a thermoplastic polyurethane (TPU) based filament specially engineered to work on most direct-extruders. It has a shore hardness of 95A and can stretch more than 5 times its original length. TPU K7 95A is a multifunctional elastomer with unique properties. It has excellent abrasion resistance, tear resistance, and oil solvent resistance
• 🔮 EXTREMELY DURABLE: Kexcelled has a closed-loop control system and near-freezing point cooling technology, which is the industry's leading elastomer filament diameter control technology. Effectively reduce the printing failure rate and the layer pattern caused by uneven filament diameter. The surface of the product is smoother. The moisture before processing is strictly controlled to reach a level of less than 500ppm. This allows the printed parts to maintain excellent mechanical properties.

Silk PLA Filament 1.75mm +/- 0.03mm, Update kexcelled 3D Printing Filament, Shiny Glossy Surface, 1kg Spool (2.2lbs), Fit Most FDM Printer, Tangle-Free, Vacuum Packaging, Pinky Copper

• 💫 SMOOTH & STABLE PRINTING: Kexcelled has a proprietary technical formula and rigid manufacturing quality control to make PLA K5Silk have no tangles, no bubbles, and no clog. Its performance is stable with smooth extrusion and excellent adhesion, without stringing and warping issues under optimal settings. To avoid being tangled, please insert the filament end into spool holes after use
• 🔮 SILK LUSTER TEXTURE: PLA K5Silk has a special reflective mechanism, which makes the material itself have the luster of silk, and the layer pattern is obviously optimized. It only needs very little post-processing to print out models with good surface effects, which can be used as decoration for homes, offices, etc.

Carbon Fiber PLA Filament 1.75mm +/- 0.03mm, kexcelled Modified PLA 3D Printing Filament, Toughness Enhanced, 1kg Spool (2.2lbs), Fit Most FDM Printer, Black

• ✨PLA K6 CF: An excellent entry-level PLA modification material. Compared with regular PLA, carbon fiber filament has stronger toughness, higher strength and rigidity, low shrinkage, and high fluidity. Add 10% carbon fiber
• 🛠️Technology Upgrade: Refined carbon fiber addition process optimizes carbon fiber float and agglomeration problems. Reduces wear and tear on the nozzle and reduces the likelihood of nozzle clogging

PLA Metallic 1.75mm, kexcelled 3D Printing Filament +/- 0.03mm, Paint-Free, Metal Glossy Shiny Surface, Cardboard Spool, 1kg Spool (2.2lbs), Fit Most FDM Printer, Rose Gold

• 💗 METAL SURFACE: It is a PLA-based consumable with a metallic color packaging with fully recycled cardboard spool and box. It has been adjusted by a special process to be more lustrous than normal metallic colors. It can present a high gloss metallic color without post-treatment such as painting or polishing.
• 🌱 ENVIRONMENTAL-FRIENDLY & SPRAY-FREE: Introducing the concept of spray-free materials into 3D printing materials, without the use of chemical coatings for processing, you can have a metallic paint-like effect, which is green and environmentally friendly. At the same time, the cycle of material verification and product development is greatly shortened.

PETG Filament 1.75mm +/- 0.03mm, kexcelled 3D Printer Filament, Chemical Resistance, 1kg Spool (2.2lbs), Fit Most FDM Printer, Vacuum Packaging, White

• ✨ Upgraded Filament: The kexcelled PETG filament has been upgraded to PETG V2, which significantly improves the sticky nozzle problem and improves notch impact resistance to enhance printability
• 🧴Chemical Resistance: PETG has excellent chemical resistance and can withstand immersion in more than 10 different solutions such as automotive oil, perfume, detergent, toothpaste, etc

suchkawe 100 Sheets A4 Vellum Paper, 8.5 x 11 Inches Translucent Tracing Paper Clear Paper for Printing Sketching Tracing Drawing Animation

• ✎Premium Quality: Made of 73gsm vellum paper with high strength, transparency and print quality. The vellum paper is non-deformation, heat resistance, light resistance, high temperature resistance, etc. It is very suitable for printing on laser or inkjet printers and transmits images clearly.
• ✎Size: Each A4 vellum paper measures 8.27x 11.69 inches (21cm x 29.7cm), which can be cut as you need.

KULTLOGGEN Sketch paper roller yellow Tracing paper semi transparent paper Silk paper A3 A4 30 g/m² 12 in x 50 yd, ca. 31 cm x 46 m

• Sketch paper for designer, architect and landscape architect
• Perfect for sketches, color: transparent yellow (semi-transparent)

285Sheet Tracing Paper Set A4 Translucent Tracing Paper Clear Paper for Drawing Clear Tracing Paper for Tracing Design Drawing Graphic Scrapbooking

• Suitable for Most Pens: Our A4 tracing paper has excellent compatibility and absorption, which is not easy to stain. And the translucent clear paper does not tear easily when writing. It is suitable for drawing in a variety of media, including pencils, pens, watercolors, neutrals, markers, charcoal, crayons.
• White Translucent Design: Our translucent paper for printing has a translucent design with excellent transparency and delicate surface texture. You can paint, sketch and trace easily with our paper. It is also very suitable for you to practice writing for your child, so that your child has more beautiful handwriting in the practice.

Clairefontaine - Ref GPT3A3Z - Goldline Heavyweight Tracing Pad (Contains 50 Sheets) - A3 (420 x 297mm) in Size, 112gsm Paper, FSC-Certified - Suitable for Tracing Items

• A3 in size
• Made from 112gsm transparent paper

AyeVision 50 Sheets A4 Vellum Transfer Paper Tracing Paper Translucent Printable Sketching Overlays Sheet Writing Copying Printing Animation DIY Art Craft for Inkjet Laser Printers (50 Sheets)

• 【Semi-translucent Tracing Paper】50/100 sheets semi-translucent tracing papers, which is sufficient in quantity that can satisfy your various uses in art or craft works. Perfect for tracing work, art, craft, copying, sketching or calligraphy. Excellent for tracing overlays and drawings in pencil, pen and marker, etc.
• 【High Quality Tracing Papers】with no rough edges are that cut evenly, semi-translucent white, tracing paper which is perfect for painting, sketching and tracing. It is not easy to tear when using with pencils, pen, and the marks are easy to wipe away.

PROUSKY 100 Sheets Tracing Paper White A4 Transfer Paper Translucent Tracing Paper White Carbon Paper for Drawing Architecture Copying Design Sketching Printing Scrapbooking

• Sufficient Quantity: You will get 100 sheets of transparent paper, in sufficient quantity to meet your daily needs, A4 sized, 21 x 29.7cm, can be cut according to your needs to facilitate your life
• Translucent Design: Our premium quality tracing paper is made up of vellum which will not curl or pierce easily, also sturdy enough to withstand folding, and thin as a cicada wing at the same time, paperwhite, and translucent, easy to copy

DMC Tracing Paper

• Two 8.5in x 11in sheets, 1 yellow and 1 blue
• Yellow for the dark colors and the blue for light to medium colors

Milisten 50 Sheets Colored Vellum Paper Transfer Paper Translucent Tracing Paper Printable Sheets for Printing Drawing Ink

• Also widely used in printing and production of slabs industry.
• It is commonly used as a copy of calligraphy card and painting.

Berolle 36 Sheets Diamond Painting Release Paper Sheet Non-Stick Cover Replaceable Reusable Paper Diamond Painting Double-Sided Silicone Release Paper for Diamond Painting

• 【Package】The package comes with 36 sheets of double-sided release paper, 10 x 15cm/ 5.9 x 3.9 inch of each sheet, which is available on both sides with a enough quantity to meet your diamond painting craft needs.
• 【Material】The diamond painting paper is made of smooth non-stick silicon paper printed on surface, designed with a double-sided covers that can protect the release paper from sticking to your diamond paintings. It is durable and reusable with a long lifetime.

DAERLE 100 Sheets Diamond Painting Release Paper, Double-Sided Release Paper Non-Stick Diamond Painting Cover Replacement Paper Diamond Art Accessories, Diamond Painting Accessories 15x10cm/6x4in

• Package: The package comes with 100 sheets of 15x10cm/6x4inch non-stick diamond painting release paper.
• Effectively Protected：Diamond art release paper can effectively prevent glue of diamond painting canvas from sticking various beads, hairs and dusts, so it can keep canvas's without diamonds clean and stickness