Aaron Chemicals
1-8 of 320 results

Hilitand Gas Flowmeter, LZQ-2 Flowmeter 0-3LPM Flow Meter with Control Valve for Oxygen, Air, Gas

• INSTRUCTIONS: This gas meter is connected to hose to measure unidirectional gas flow
• MADE OF HIGH QUALITY ACRYLIC: Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure

G5 PMS5003 Laser PM2.5 Sensor Air Quality Monitoring Dust Haze Tester

• Laser scattering principle achieves accurate measurement.The product has gone through EMI, EMC testing and passed reliability testing.
• Constant wind pressure and flow self-adaption control system.

Universal Pitot Tube Cover. HI-VIZ

• Inside of cover measures 4 3/4" long and 1 1/2" tall.
• Highly noticeable and very durable HI-VIZ

3Pcs / Set Stainless Steel Small Funnel With Handle Multifunctional Mini Oil Drainer Joint Pliers End Nipper Cutting Nipper Stainless Steel Cutter Combination Pliers Locking Plier Wrench Wire

• A must-have tool in daily life for transferring liquid, dry ingredients and powder.
• Heart- shaped stem allows the outflow of air in order to fill liquid faster.

3Pcs / Set Stainless Steel Small Funnel With Handle Multifunctional Mini Oil Drainer Joint Pliers End Nipper Cutting Nipper Stainless Steel Cutter Combination Pliers Locking Plier Wrench Wire

• A must-have tool in daily life for transferring liquid, dry ingredients and powder.
• Heart- shaped stem allows the outflow of air in order to fill liquid faster.

Delmhorst H-4 Prod Handle

• Title: Delmhorst H-4 Prod Handle
• Brand: Delmhorst

LZQ-7 Flowmeter, Air Flow Rate Gauge 2-20LPM Flow Meter Sensor Switch with Control Valve for Measuring Oxygen/Air/Gas

• HIGH QUALITY ACRYLIC: The Flow Rate Gauge is made of high quality acrylic, which has the characteristics of durable and reliable, it is transparent and can hold up to 0.6MPa pressure.
• EASY TO CONNECT: This gas meter is connected to hose to measure unidirectional gas flow. It is simple to use, and it has 8mm barbs for convenient connection of hoses.

Turbine Flow Meter, Turbine Digital Diesel Oil Fuel Flow Meter Gauge 1"BSPP For Chemicals Liquid Water

Water Rotameters,Flow Meter,Flow Gauge,Plastic Tube Flow Meter,LZS-15 60-600L/H,for Measure Single Phase of Pulsation (Liquid) Flow of The Fluid

• Made of plastic, used for testing the instantaneous flow liquid
• Measure flow range is 60-600L/H

testo 405 - Thermal Anemometer

• Measurement of air velocity, volumetric flow and air temperature
• For measurements in ventilation ducts and in rooms

Simply 50139 J-B Weld PlasticBonder- Black,25 ml

• GAP FILLER - Ideal gap filler for plastics and composites.
• PLASTIC TO PLASTIC BONDING - Great for plastic bonding where other epoxies may struggle to adhere.

JB Weld TRA50133-TEX Plastic Bonder Syringe, Tan, Pack Of 1

• GAP FILLER - Ideal gap filler for plastics and composites
• PLASTIC TO PLASTIC BONDING - Great for plastic bonding where other epoxies may struggle to adhere

J-B Weld 8271 Kwikweld Professional Quick Setting Steel Reinforced 2 Part Epoxy adhesive for Repair, Dark Grey, Two 5 oz tubes

• PROFESSIONAL SIZE - Ideal for high use professionals such as the automotive industry
• FAST SETTING - Sets within minutes and cures within just a couple of hours

Epoxy Resin 10.2 kg Fibreglass Kit | Professional Quality Clear & Odourless Lamination and Resin with Hardener and Gloves, incl. English Instructions…

• Top quality: high-quality – Liquid resin for crystal clear, transparent and Luftblasenfreie Gießerge Bnisse
• Versatile application: model building, boats, form-fitting construction, Laminieren, exterior joinery, coated floors, pond construction, terrarium, etc.

WEST SYSTEM® A Pack 105/205

• This convenient epoxy bundle contains one can of WEST SYSTEM 105 Epoxy Resin (1kg), and WEST SYSTEM 205 Fast Hardener (0.2kg). Use in a majority of bonding situations, produces a rapid epoxy cure that develops physical properties quickly at room temperature.
• WEST SYSTEM 105 Epoxy Resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended with 205 Fast Hardener at a 5:1 ratio, it cures to a hard, solid plastic with superior physical properties. It will wet out and bond with wood fibre, fibreglass, reinforcing fabrics and a variety of metals. (205 Fast Hardener is not intended for clear coating.)

WEST SYSTEM Pump Set 5:1 Ratio (301-5A)

• These pumps are specially designed for convenience and accuracy when dispensing WEST SYSTEM 105 Epoxy Resin and WEST SYSTEM hardeners.
• The pumps slot directly on the resin and hardener containers and have been pre-calibrated to deliver an accurate working ratio upon use.

UHU 3-45592 Plus Final Strength, Crystal Clear and Highly Durable 2-Component Adhesive in a Practical Double Chamber Syringe for one Application in The Correct Mixing Ratio, 25 g

• Two-component adhesive in a practical double-chamber syringe for easy dispensing of the two adhesive components in the correct mixing ratio
• Processing time (pot life) up to 90 minutes, functional strength after 12 hours, at room temperature after 24 hours final strength (final strength approx. up to 170 kg/cm²)

ARALDITE® ARA-400005 Araldite Rapid 2-Part Epoxy Adhesive Glue Tubes Opaque 2 x 15ml

• All materials, Long lasting, fast setting (sets in 5 minutes). For use indoors or out.
• A strong, long lasting solvent-free adhesive which is water resistant.

QuikSteel 17502 Plastic Repair Epoxy Paste, 2 Oz

• Quiksteel plastic epoxy paste
• 260C (500F) temperature resistant

MG Chemicals 8329TFS Thermally Conductive Adhesive, Slow Cure, 25 mL Dual Dispenser

• Thermal conductivity: 1.22 W/(make)
• Working life of 4 hours

Silverline Desoldering Wire 2mm (512655)

• Aids in the removal of solder from joints
• Length 1.5m

Soldering Irons & Accesories 420023 Desoldering Braid, 2 mm/1.5 m Length

• 1.5 m Length
• Sold in a jedem

MG Chemicals 426-NS #4 No Clean Super Wick Desoldering Braid, 0.1" Width x 5' Length, Blue

• No clean super wick
• Flux residue is non-conductive and non-corrosive. Static free bobbins.

MG Chemicals Desoldering Braid #5 Fine Braid Super Wick with RMA Flux, 5' Length x 0.125" Width, Brown

• Oxide-free clean copper
• Static free bobbins

MG Chemicals 424 Desoldering Braid #2 Fine Braid Super Wick with RMA Flux, 5' Length x 0.05" Width, Yellow

• Oxide-free clean copper
• Static free bobbins

MG Chemicals 426-LF Desoldering Braid #4 Fine Braid Super Wick for Lead Free Solder, 0.10" Width x 5' Length

• For lead free solder
• Great with conventional tin/lead solders

Fixpoint 45246 Desolder Wick, 2.0mm Diameter, 1.5m Length

• 2.0 MM Desoldering Wick on 1.5 m spool
• Highly absorbent Lotsau Goldfinches from Fixpoint

MG Chemicals 424-NF-10FT Unfluxed Super Wick Desoldering Braid, 0.06" Width x 10' Length, ESD Safe

• Allows for customized flux
• Ideal for water-soluble flux use

MG Chemicals #2 No Clean Super Wick Desoldering Braid, 0.05" Width x 5' Length

• No clean super wick
• Flux residue is non-conductive and non-corrosive

MG Chemicals 424-LF Fine Braid Super Wick™ Desoldering Braid for Unleaded Solder, 1.5 m Length x 1.5 mm Width

• For lead free solder
• Great with conventional tin/lead solders

Silverline Desoldering Wire 2mm (512655)

• Aids in the removal of solder from joints
• Length 1.5m

Soldering Irons & Accesories 420023 Desoldering Braid, 2 mm/1.5 m Length

• 1.5 m Length
• Sold in a jedem

MG Chemicals 426-NS #4 No Clean Super Wick Desoldering Braid, 0.1" Width x 5' Length, Blue

• No clean super wick
• Flux residue is non-conductive and non-corrosive. Static free bobbins.

MG Chemicals Desoldering Braid #5 Fine Braid Super Wick with RMA Flux, 5' Length x 0.125" Width, Brown

• Oxide-free clean copper
• Static free bobbins

MG Chemicals 424 Desoldering Braid #2 Fine Braid Super Wick with RMA Flux, 5' Length x 0.05" Width, Yellow

• Oxide-free clean copper
• Static free bobbins

MG Chemicals 426-LF Desoldering Braid #4 Fine Braid Super Wick for Lead Free Solder, 0.10" Width x 5' Length

• For lead free solder
• Great with conventional tin/lead solders

Fixpoint 45246 Desolder Wick, 2.0mm Diameter, 1.5m Length

• 2.0 MM Desoldering Wick on 1.5 m spool
• Highly absorbent Lotsau Goldfinches from Fixpoint

MG Chemicals 424-NF-10FT Unfluxed Super Wick Desoldering Braid, 0.06" Width x 10' Length, ESD Safe

• Allows for customized flux
• Ideal for water-soluble flux use

MG Chemicals #2 No Clean Super Wick Desoldering Braid, 0.05" Width x 5' Length

• No clean super wick
• Flux residue is non-conductive and non-corrosive

MG Chemicals 424-LF Fine Braid Super Wick™ Desoldering Braid for Unleaded Solder, 1.5 m Length x 1.5 mm Width

• For lead free solder
• Great with conventional tin/lead solders