The 10 colour repeat clear carrier colour coded 40 PIN ribbon cable, which can be separated into single wire or multi - strand combination for various usages.easy to identify each wires in your DIY or prototype.
Cable material: 12-core pure copper wire,premium quality and safe,saving space and weight.
Working voltage: 3.0-5.8V; Current: 0.18A. Air volume: 5m3 / h; Number of revolutions: 13200RPM. It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Upgrade bearing of this fan not only can make sure outputing a lot of wind,but also quiet enough.
3 sections large capacity blanket laundry baskets - Divided into 3 sections laundry hamper,so you can sort your dark, color from light as you drop clothing into the bags. Each laundry bag can hold up to 2 standard size loads of laundry.
SG90 is a high quality, cost effective servo for all your mechatronic requirements. It comes with a 3-pin power and control cable.
SG90 9G Micro Servo Motor for RC Helicopter, Micro Robot, Robot Arms and Boats Fit for all types of R/C toys and also make electronics DIY based on compatible with Arduino, Raspberry Pi
This version of the MCP2515 Breakout solves some of the board's problems. 120 ohm terminal resistors. With Impedance matching, ensures the drive capability, long distance data transmission prevents signal emission
High Power High Efficiency: Supports CAN V2.0B specification, the communication speed 1Mb/s. High reliability, strong vibration resistance, good electromechanical performance. 0 to 8-byte data field. With standard frame, expand the frame and remote frame.
Breadboard power supply module, for Ar-duino board solderless breadboard. The module provides dual 5V and 3.3V power rails, and has a multi-purpose female USB socket, convenient external lead use.
Input Voltage: DC 6.5-12V; Output Voltage: DC 3.3V 5V; Input do not exceed 700mA, Locking ON / OFF Switch, no need to unplug the power adapter, LED Power Indicator indicated when the board is powered up.
SAFE MATERIAL: The signal isolator is made of flame retardant material, with paint spraying, which can protect the circuit from environmental corrosion.
STABLE ISOLATION: With photoelectric isolation, anti high frequency interference, realize mutual isolation of input and output, protect power equipment.
[FOR LONG DISTANCE] The current output is 4‑20mA, can be used for long distance transmission with wide range of applications.
[Wide Range of Applications] This pressure transmitter can be used in process control, aviation, aerospace, automotive, health care equipment, HVAC and other fields.
HIGH EFFICIENCY: Using single chip microcomputer chip, with lower power, higher withstand voltage, PCB transformer, fast transmission response.
SPECIFICATIONS: The DC signal isolator is designed with 2 in 4 out, the power supply is 24V, the input signal is 4‑20mA, efficient and stable in operation.
ACCURATE DETECTION: Liquid level transmitter and high accuracy silicon diffusion can more accurately monitor water level.
STABLE DETECTION: Full digital conditioning circuit, 4 to 20mA signal output, ensuring more stable performance. IP68 multi layer waterproof protection, safe to use, and long service life.
STABLE DETECTION: Full digital conditioning circuit, 4 to 20mA signal output, ensuring more stable performance. IP68 multi layer waterproof protection, safe to use, and long service life.
STAINLESS STEEL MATERIAL: The shell is made of 304 stainless steel, which is durable and equipped with waterproof cables, ensuring safe use. The liquid level sensor has a wire length of 6 meters and is suitable for detecting water levels within the range of 0 to 3 meters.
DURABLE AND NON CLOGGING: Liquid level transmitter adopt corrosion resistant material, excellent corrosion resistant performance, excellent solid structure, prevent bending, with high accuracy, high stability, prevent clogging hole design, easy to clean
WITH CABLE: The housing of the water level sensor probe is made of 304 stainless steel with waterproof cable for healthy use and suitable for water level detection
SAFE MATERIAL: The signal isolator is made of flame retardant material, with paint spraying, which can protect the circuit from environmental corrosion.
STABLE ISOLATION: With photoelectric isolation, anti high frequency interference, realize mutual isolation of input and output, protect power equipment.
[FOR LONG DISTANCE] The current output is 4‑20mA, can be used for long distance transmission with wide range of applications.
[Wide Range of Applications] This pressure transmitter can be used in process control, aviation, aerospace, automotive, health care equipment, HVAC and other fields.
HIGH EFFICIENCY: Using single chip microcomputer chip, with lower power, higher withstand voltage, PCB transformer, fast transmission response.
SPECIFICATIONS: The DC signal isolator is designed with 2 in 4 out, the power supply is 24V, the input signal is 4‑20mA, efficient and stable in operation.
ACCURATE DETECTION: Liquid level transmitter and high accuracy silicon diffusion can more accurately monitor water level.
STABLE DETECTION: Full digital conditioning circuit, 4 to 20mA signal output, ensuring more stable performance. IP68 multi layer waterproof protection, safe to use, and long service life.
STABLE DETECTION: Full digital conditioning circuit, 4 to 20mA signal output, ensuring more stable performance. IP68 multi layer waterproof protection, safe to use, and long service life.
STAINLESS STEEL MATERIAL: The shell is made of 304 stainless steel, which is durable and equipped with waterproof cables, ensuring safe use. The liquid level sensor has a wire length of 6 meters and is suitable for detecting water levels within the range of 0 to 3 meters.
DURABLE AND NON CLOGGING: Liquid level transmitter adopt corrosion resistant material, excellent corrosion resistant performance, excellent solid structure, prevent bending, with high accuracy, high stability, prevent clogging hole design, easy to clean
WITH CABLE: The housing of the water level sensor probe is made of 304 stainless steel with waterproof cable for healthy use and suitable for water level detection
SAFE MATERIAL: The signal isolator is made of flame retardant material, with paint spraying, which can protect the circuit from environmental corrosion.
STABLE ISOLATION: With photoelectric isolation, anti high frequency interference, realize mutual isolation of input and output, protect power equipment.
[FOR LONG DISTANCE] The current output is 4‑20mA, can be used for long distance transmission with wide range of applications.
[Wide Range of Applications] This pressure transmitter can be used in process control, aviation, aerospace, automotive, health care equipment, HVAC and other fields.
HIGH EFFICIENCY: Using single chip microcomputer chip, with lower power, higher withstand voltage, PCB transformer, fast transmission response.
SPECIFICATIONS: The DC signal isolator is designed with 2 in 4 out, the power supply is 24V, the input signal is 4‑20mA, efficient and stable in operation.
ACCURATE DETECTION: Liquid level transmitter and high accuracy silicon diffusion can more accurately monitor water level.
STABLE DETECTION: Full digital conditioning circuit, 4 to 20mA signal output, ensuring more stable performance. IP68 multi layer waterproof protection, safe to use, and long service life.
STABLE DETECTION: Full digital conditioning circuit, 4 to 20mA signal output, ensuring more stable performance. IP68 multi layer waterproof protection, safe to use, and long service life.
STAINLESS STEEL MATERIAL: The shell is made of 304 stainless steel, which is durable and equipped with waterproof cables, ensuring safe use. The liquid level sensor has a wire length of 6 meters and is suitable for detecting water levels within the range of 0 to 3 meters.
DURABLE AND NON CLOGGING: Liquid level transmitter adopt corrosion resistant material, excellent corrosion resistant performance, excellent solid structure, prevent bending, with high accuracy, high stability, prevent clogging hole design, easy to clean
WITH CABLE: The housing of the water level sensor probe is made of 304 stainless steel with waterproof cable for healthy use and suitable for water level detection