Air Cooled
9-1 of 40 results

Daedalus CNC Brushless Spindle Motor Kit, 500w, ER11, 48V DC, 12000RPM

• ★Spindle: 3 Wires-Brush-less, 500w, ER11, 48v DC, 0-12000RPM, φ 2-3/16"
• ★Mach3 control: Support Mach3 control motor after driver upgrade, Reference manual for wiring

Daedalus CNC Spindle Motor Kit, 500w, ER11, Brushed

• ★Spindle, 2 Wires-Brushed, 500w, ER11, working voltage 0-100v DC, 0-12000RPM, φ 2.05"
• ★Enough Power for wood engraving, MDF, plastics, acrilic, plexiglass, foam board.

CNC Spindle Motor 1.5KW 1500W 220V 400Hz 24000RPM Water Cooled Spindle with 1.5KW VFD + 80mm Spindle Mount + 75W Water Pump + 5M Water Pipes + 7 Gripper ER11 Parts (1-7mm)

Spindle Motor, Brushless Spindle Motor 300W 52mm DC 48V CNC Spindle ER11 Air Cooled Motor Spindle Motor Kits For Engraving Machine

• Good Performance: The dynamic balance technology of the spindle motor can effectively reduce the noise during use, increase the stability of the working process, and significantly improve the efficiency and service life
• High Precision: The radial runout of the spindle of the brushless spindle motor is 0.01-0.04, with high accuracy. Stable operation, easy to replace damaged

300W 52mm Spindle Motor,DC 48V CNC Spindle ER11 Air Cooled Motor,Brushless Spindle Motor PCB Spindle Motor DIY Engraver Accessories,for Engraving Machine

• SPECIFICATION:❶Working voltage: 48VDC❷Power: 300 W❸Rotating speed: Maximum. 12000 RPM❹Torsion: 3Kg.cm❺Insulation resistance: >2MΩ❻Dielectric strength: 400V
• APPLICATION:Spindle Motor can be used for solid wood PCB carving drilling and so on.

Genmitsu GS-775M 20000RPM 775 CNC Spindle Motor with ER11 Collet Set, DC 24V, High Power, Noise Suppression, Electrical DC Motor for 3018 CNC Router Machine

• DC: 24V. Speed: 20000/min.
• Experience a quick and easy upgrade for your Genmitsu Desktop CNC.

Spindle Motor, 300W 52mm DC 48V CNC Spindle ER11 DIY Engraver Accessories Air Cooled Motor For Engraving Machine PCB Spindle Motor

• Powerful Bearing--- The spindle motor adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
• Technical Parameters--- Power: 300W; Voltage: 48VDC; Speed: 12000/min; Collet Size: 45mm /1.77 inch*16mm / 0.63 inc; Torque: 3Kg.cm; Insulation resistance: >2MΩ; Mainly used for solid wood PCB carving drilling and so on

Tassety DC Motor CNC 775 Spindle Motor 100W 12-24VDC 20000RMP + ER11 Collet for DIY Mini CNC 3018 3018Pro 3018Pro-Max 3018Pro-N

• , low friction and stable operation.
• Front and rear double , universal DC 12V-24V .

DC Worm Gear Motor Universal Dividing Head BS-0 4 Inches CNC Rotary Axis 3 Jaw 100mm 125mm Chuck CNC Tailstock for CNC Router Rotary Table

• User-Friendly Machine
• Direct and Indirect Dividing

Daedalus 3018 CNC Upgrade Kit, for X-Axis Upgrade & Y-Axis Extension

• Extend your 3018 CNC Y-axis from 290 mm to 450 mm, get a 320*450mm Basic Area, 320*370mm Movement Area, 300*320 Actual Stroke.
• Upgrade your 3018 CNC X-axis with a aluminium knob, save your hand from gettting dirty when trying to turn the screw by hand. Pls kindly to know that it DOES-NOT extend the X axis.

Daedalus CNC Brushless Spindle Motor Kit, 500w, ER11, 48V DC, 12000RPM

• ★Spindle: 3 Wires-Brush-less, 500w, ER11, 48v DC, 0-12000RPM, φ 2-3/16"
• ★Mach3 control: Support Mach3 control motor after driver upgrade, Reference manual for wiring

Daedalus CNC Spindle Motor Kit, 500w, ER11, Brushed

• ★Spindle, 2 Wires-Brushed, 500w, ER11, working voltage 0-100v DC, 0-12000RPM, φ 2.05"
• ★Enough Power for wood engraving, MDF, plastics, acrilic, plexiglass, foam board.

CNC Spindle Motor 1.5KW 1500W 220V 400Hz 24000RPM Water Cooled Spindle with 1.5KW VFD + 80mm Spindle Mount + 75W Water Pump + 5M Water Pipes + 7 Gripper ER11 Parts (1-7mm)

Spindle Motor, Brushless Spindle Motor 300W 52mm DC 48V CNC Spindle ER11 Air Cooled Motor Spindle Motor Kits For Engraving Machine

• Good Performance: The dynamic balance technology of the spindle motor can effectively reduce the noise during use, increase the stability of the working process, and significantly improve the efficiency and service life
• High Precision: The radial runout of the spindle of the brushless spindle motor is 0.01-0.04, with high accuracy. Stable operation, easy to replace damaged

300W 52mm Spindle Motor,DC 48V CNC Spindle ER11 Air Cooled Motor,Brushless Spindle Motor PCB Spindle Motor DIY Engraver Accessories,for Engraving Machine

• SPECIFICATION:❶Working voltage: 48VDC❷Power: 300 W❸Rotating speed: Maximum. 12000 RPM❹Torsion: 3Kg.cm❺Insulation resistance: >2MΩ❻Dielectric strength: 400V
• APPLICATION:Spindle Motor can be used for solid wood PCB carving drilling and so on.

Genmitsu GS-775M 20000RPM 775 CNC Spindle Motor with ER11 Collet Set, DC 24V, High Power, Noise Suppression, Electrical DC Motor for 3018 CNC Router Machine

• DC: 24V. Speed: 20000/min.
• Experience a quick and easy upgrade for your Genmitsu Desktop CNC.

Spindle Motor, 300W 52mm DC 48V CNC Spindle ER11 DIY Engraver Accessories Air Cooled Motor For Engraving Machine PCB Spindle Motor

• Powerful Bearing--- The spindle motor adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.
• Technical Parameters--- Power: 300W; Voltage: 48VDC; Speed: 12000/min; Collet Size: 45mm /1.77 inch*16mm / 0.63 inc; Torque: 3Kg.cm; Insulation resistance: >2MΩ; Mainly used for solid wood PCB carving drilling and so on

Tassety DC Motor CNC 775 Spindle Motor 100W 12-24VDC 20000RMP + ER11 Collet for DIY Mini CNC 3018 3018Pro 3018Pro-Max 3018Pro-N

• , low friction and stable operation.
• Front and rear double , universal DC 12V-24V .

DC Worm Gear Motor Universal Dividing Head BS-0 4 Inches CNC Rotary Axis 3 Jaw 100mm 125mm Chuck CNC Tailstock for CNC Router Rotary Table

• User-Friendly Machine
• Direct and Indirect Dividing

Daedalus 3018 CNC Upgrade Kit, for X-Axis Upgrade & Y-Axis Extension

• Extend your 3018 CNC Y-axis from 290 mm to 450 mm, get a 320*450mm Basic Area, 320*370mm Movement Area, 300*320 Actual Stroke.
• Upgrade your 3018 CNC X-axis with a aluminium knob, save your hand from gettting dirty when trying to turn the screw by hand. Pls kindly to know that it DOES-NOT extend the X axis.

CRESTA DTX370WH Weather Station

• Shows indoor and outdoor temperature in
• Shows the air humidity inside and outside

MOLVUS V8 Engine Kit FS-V800 28cc Gasoline Engine - Build Your Own V8 Engine, 1/10 Four-Stroke Water-Cooled V8 Engine Model Kit That Works RC Car Boat (KIT Version)

• Exquisite Model: Incredibly detailed following the real engine.With the Lightweight, It can be better compatible with the RC model and improve the unit power output ratio.The engine comes with an electric starter kit, providing users with all new fun.
• Built-in Mechanical Pump Water-Cooled Kit: The power of the pump body comes from the crankshaft, and the pump body provides circulating power to the coolant. Later, it can cooperate with the cooling fan to enhance the self-cooling performance.High-speed structure design & corrosion-resistant material manufacturing. Large flow water pump provides powerful cooling capacity.

MOLVUS V8 Engine Kit, FS-V800 V8 Engine 28cc 8-cylinder 4-stroke Water-cooled Nitro Engine Interal Combustion Engine, RC Engine Kit for RC Car Boat - KIT Version, 12.34 x 3.2 x 12.73cm

• Single cylinder stirling motor generator model with LED diode and light bulb, product size: 16 x 8.7 x 8 cm (L x W x H)
• NOVELTY DESIGN: The motor can be illuminated by LED light emitting diodes or incandescent bulbs, so you can explore science while playing, observe the magical operation process and promote imagination and creativity.

GOOFIT Motorcycle Engine Transmission Gearbox Gear external box Main Counter Shaft Replacement For Chinese 50cc 110cc 125cc Engine Pit Dirt Motor Bike

• 1.Condition : 100 % new
• 2.Material: metal

Technoline WS 1700 Black Battery

Technoline MA 10901 Black AC/Battery

Alomejor Bike Engine Bike Engine Handpiece 2Stroke 80CC Gasoline Engine Air Cylinder Engine Internal Combustion Engine

• 【LOW NOISE】Low vibration when the engine motor works.Comes with all needed accessories for easy installation. High reliability, wonderful accessory for E-bike.
• 【SUITABLE FOR】 It is used for 80cc engine electric bicycle.Perfect for upgrading to an electric bike, you can enjoy a faster ride.

TT Racing AN6 (5/16) 8.3mm Stainless Steel Blue Tracer Braided Fuel Gas E85 Oil Line Hose 1FT BLSSAN6_001

• Fuel Hose Type: AN-6 Stainless Steel PU (Polyurethane) Made Fuel Line
• Inside Diameter: 8.3 mm (5/16")

TOYAN×HOWIN V8 FS-V800 28cc Nitro Engine, 1/10 Eight-cylinder Four-stroke Water-cooled Engine Model for RC Car Boat, Build Your Own V8 Engine - KIT Version

• >Material: Metal.
• >Product Dimensions: 12.34 x 3.2 x 12.73cm.

CRESTA DTX370WH Weather Station

• Shows indoor and outdoor temperature in
• Shows the air humidity inside and outside

MOLVUS V8 Engine Kit FS-V800 28cc Gasoline Engine - Build Your Own V8 Engine, 1/10 Four-Stroke Water-Cooled V8 Engine Model Kit That Works RC Car Boat (KIT Version)

• Exquisite Model: Incredibly detailed following the real engine.With the Lightweight, It can be better compatible with the RC model and improve the unit power output ratio.The engine comes with an electric starter kit, providing users with all new fun.
• Built-in Mechanical Pump Water-Cooled Kit: The power of the pump body comes from the crankshaft, and the pump body provides circulating power to the coolant. Later, it can cooperate with the cooling fan to enhance the self-cooling performance.High-speed structure design & corrosion-resistant material manufacturing. Large flow water pump provides powerful cooling capacity.

MOLVUS V8 Engine Kit, FS-V800 V8 Engine 28cc 8-cylinder 4-stroke Water-cooled Nitro Engine Interal Combustion Engine, RC Engine Kit for RC Car Boat - KIT Version, 12.34 x 3.2 x 12.73cm

• Single cylinder stirling motor generator model with LED diode and light bulb, product size: 16 x 8.7 x 8 cm (L x W x H)
• NOVELTY DESIGN: The motor can be illuminated by LED light emitting diodes or incandescent bulbs, so you can explore science while playing, observe the magical operation process and promote imagination and creativity.

GOOFIT Motorcycle Engine Transmission Gearbox Gear external box Main Counter Shaft Replacement For Chinese 50cc 110cc 125cc Engine Pit Dirt Motor Bike

• 1.Condition : 100 % new
• 2.Material: metal

Technoline WS 1700 Black Battery

Technoline MA 10901 Black AC/Battery

Alomejor Bike Engine Bike Engine Handpiece 2Stroke 80CC Gasoline Engine Air Cylinder Engine Internal Combustion Engine

• 【LOW NOISE】Low vibration when the engine motor works.Comes with all needed accessories for easy installation. High reliability, wonderful accessory for E-bike.
• 【SUITABLE FOR】 It is used for 80cc engine electric bicycle.Perfect for upgrading to an electric bike, you can enjoy a faster ride.

TT Racing AN6 (5/16) 8.3mm Stainless Steel Blue Tracer Braided Fuel Gas E85 Oil Line Hose 1FT BLSSAN6_001

• Fuel Hose Type: AN-6 Stainless Steel PU (Polyurethane) Made Fuel Line
• Inside Diameter: 8.3 mm (5/16")

TOYAN×HOWIN V8 FS-V800 28cc Nitro Engine, 1/10 Eight-cylinder Four-stroke Water-cooled Engine Model for RC Car Boat, Build Your Own V8 Engine - KIT Version

• >Material: Metal.
• >Product Dimensions: 12.34 x 3.2 x 12.73cm.