Anycubic
1-10 of 400 results
Doumii
FEP Film for LCD 3D Resin Printer – FEP Release Film Fit for Elegoo Mars/Anycubic Photon/Creality LD002R/LONGER Orange, 7.87x5.51x0.006 inch, 3Pcs
£16.30- Attention – There are two protective films on both sides of the FEP sheet, make sure they are removed before installing.
- Compatibility – Fit for most LCD 3D resin printers with screen from 5.5'' to 6.08'', such as Elegoo Mars/Anycubic Photon/ Creality LD002R/LONGER Orange, etc..
Doumii
3D Printer Resin Filter Disposable – with Cone Silicone Resin Funnel(Large), Paint Strainer or Resin Strainer kit for uncured Resin Recycling (101)
£15.35- The Resin or Paint Filter Kit include 100pcs of Disposable Paper Strainer with 1pcs Silicone Resin Funnel(Large).
- The Resin Strainer is easily used for pouring uncured resin back into bottle, save your money, eco-friendly.
Doumii
3D-Printer Resin Stainless-Steel Funnel Filter – with Detachable Resin Strainer, for Recycling or transferring uncured 3D-Printing Liquid，DOUMII
£17.39- The Resin funnel kit includes 1pcs stainless funnel with 2pcs detachable strainer and 1pcs brush for cleaning easily.
- The Resin stainless filter is easily used for pouring uncured resin back into bottle, save your money, and also, easy to clean, being eco-friendly.
Doumii
3D Printer Resin Filter Disposable – with Cone Silicone Resin Funnel(Large), Paint Strainer or Resin Strainer kit for uncured Resin Recycling (201)
£24.25- The Resin or Paint Filter Kit include 200pcs of Disposable Paper Strainer with 1pcs Silicone Resin Funnel(Large).
- The Resin Strainer is easily used for pouring uncured resin back into bottle, save your money, eco-friendly.
Doumii
DOUMII Water Washable 3D Resin – 405nm UV Cured 3D Printing Resin, for LCD 3D Printers, Easy to Clean and Cure, Fast Curing with High Precision. (Green, 1000g)
£52.06- Water Washable – Doumii 3D Resin could be washed easily by water instead of 95% ethyl alcohol，save your money, save your time.
- Excellent Fluidity – The formula of Doumii 3D printing resin has been optimized for Low Viscosity which could shorten curing time and being easy for cleaning the vat and the miniature.
Imetrx
iMetrx Nema 17 Stepper Motor 42x40mm Ender 3 Extruder Motor 1.5A-3.8V 2 phase 4 wires 1.8 degrees with 1Meter cable for 3D Printer Motors
£11.99- Package include: iMetrx Nema 17 Stepper Motor 42x40mm x1pc, 1Meter Wiring x1pc
- IMetrx Nema 17 Stepper Motor has high torgue and stronger power (20-25% higher than normal motors) and a lower resistance value to reduce heating.
Imetrx
iMetrx PLA Filament 1.75mm 250g Multi Color Pack (Black White Blue Red Yellow Green) 3D Printing Filament (250g/Spool, 6Spool/Pack, Diameter 1.75±0.03mm)
£39.99- To protect environment, iMetrx use recycllable paper spool rather than plastic spool. Besides, we reduce the volume of spool to save the cost of paper for environment concerns.
- Package Include: iMetrx PLA 1.75mm Black 250g x1, PLA 1.75mm White 250g x1, PLA 1.75mm Blue 250g x1, PLA 1.75mm Red 250g x1, PLA 1.75mm Yellow 250g x1, PLA 1.75mm Green 250g x1,
Imetrx
iMetrx Tile Cone Grinder 35mm Diamond Beveling Champfer Bits 1-3/8'' Diamond Countersink Drill Bits Calidad Tools Tile Tools brocas para Ceramica
£19.99- Package Include: 35mm(1-3/8'') Tile Cone Grinder Bit *1, Arbor Adapter *1
- Size of Diamond Countersink Drill Bits: Workable Length 35mm(1-3/8''), Thread 5/8''-11, Grit #80/#100
Imetrx
26Pcs 2020 Corner Brackets Set with 52Pcs M5 T Slot Nuts, 52Pcs M5x8mm Hex Socket Cap Screw and 2Pcs M3 Wrench for 2020 Series Aluminum Extrusion Profile Silver
£17.99- 【Package Included】2020 aluminum angle bracket included: 26Pcs Corner Brackets; 52Pcs M5 T Slot Nuts;52Pcs M5x8mm Hex Socket Cap Screw and 2Pcs M3 hex wrench.
- 【Specification】2020 Brackets size: 28mm Length X 20mm Width X 20mm High ; T Slot Nuts:M5(5mm); Hex Screw:M5(5mm)x8mm Length;. M3(3mm) Hex Wrench.Please see the size pictures.
Imetrx
2020 Aluminum Extrusion 400mm Black (10Pcs/Pack) V-Slot European Standard for 3D Printer,CNC and Laser Engraving Machine
£41.99- Package Contents: 10pcs 2020 Aluminum Extrusion 400mm Black
- Each 2020 Aluminum Profile 400mm is covered with protective film
Imetrx
i3 MEGA hotend V5 J-head 12V for Anycubic Mega i3, Prusa i3 Series 3D Printer Hotend Upgrades
£13.50- Package contents: 1 x V5 J-Head Anycubic Mega Hotend, 2 x V6 nozzle made of hardened steel 0.4 mm
- Compatible with the Anycubic Mega 3D printer. Please check whether the thermistor is connected correctly before installation.
Imetrx
3D Printer Rollers POM pulley Wheels for Creality Ender 3, Ender 3 v2
£9.99- ★Exquisite technology: the casing is made of high quality and high wear resistance POM Polycarbonate, calcined by CNC precision technology, no degumming, smooth surface, no burr, no bubble.
- ★High quality bearing: embedded with high quality bearing steel rolling bearing, low resistance, smooth running, higher pressure accuracy and less noise.
Imetrx
iMetrx 10m GT2 Belt 10mm 3D printer belt timing pitch 2mm
£13.99- Package include: 5m GT2 belt 10mm
- For 3D printer belt 10mm.
Imetrx
iMetrx 2020 Aluminum Extrusion L-Slot Connector Bracket,8PCS Joint Plates+40Pcs M5 Nuts+40Pcs M5x8mm Hex Socket Cap Screw for 2020 Series Aluminum Profile 3D Printer Frame
£20.98- 【Set Included】Aluminum extrusion connector plate: 8Pcs X corner plate; 40Pcs X M5 Nut;40PcsX M5x8mm Hex Socket Cap Screw
- 【Size】Please see the size pictures,Buy the right size
Imetrx
iMetrx 3D Printer Rollers Polycarbonate V slot with 8MM Eccentric Column 8MM Aluminium Columns for Ender 3 V2 3D Printer pulley wheel (16pcs/pack)
£16.99- Package Include: 3D Printer Rollers Polycarbonate *16pcs, 8mm Eccentric Column *16pcs, 8mm Aluminium Columns *16
- This 3D Printer Pulley wheel Polycarbonate is transparent.
Anycubic
ANYCUBIC 3D Printer Wash and Cure 3 Plus, Larger 2 in 1 Wash Cure Machine for ANYCUBIC Photon Mono 6Ks Mars with Gooseneck Lights, IPA-Saving & Efficient Curing, Washing Size 8.97” x 5.04” x 10.24”
£210.00- 【Size Upgraded, Capacity Increased】Compared with Anycubic wash & cure plus, wash and cure 3 plus’s washing basket volume is increased by about 13.4% to 7.6L, and total volume of the washing bucket is 12L, which is suitable for LCD 3D printers of 10.6'' and below.
- 【Partial Enhanced Curing】The innovative Flexicure gooseneck lights increases the energy value by 30,000uW/cm²over a 1-3 cm irradiation range, thus taking good care of delicate areas such as the top of the model or figure details.
Create Idea
1 Set Extruder Hotend Kit 3D Printer Nozzle Extruder Assembly 24V 40W Replacement Accessoiry Compatible with Anycubic Kobra
£6.62- Compatible with Anycubic Kobra.
- Usage: The extruder assembly is a perfect replacement accessory for 3D printer.
Xromtbem
xromtbem 3D Printer Parts SLA Dlp Resin Special Tool Set Plastic Shovel Removal Tool Spatula for Resin for Tank 2pcs Trim Removal Tool Set Film
£3.23- Professional 3D print removal tool, will not scratch build surface.
- Temperature resistant and not easy to break.
Unitak3d
Photon MONO M5s FEP Release Film 210 * 290mm,3D Printer Accessories Compatible with Anycubic Photon MONO M5s and Photon MONO M5 UV DLP LCD Resin 3D Printer-0.15 Thickness(5pcs)
£24.99- 【Application】:Work perfectly on Photon MONO M5s and Photon MONO M5 10.1 inch resin 3D printer.Product Size:290x210mmx0.15mm
- 【Non-tacky】：High cleanliness product surface provides good performance of peeling and durability.
Hzdadeve
HzdaDeve Stainless Steel Nozzles 0.4 mm Thread Hardened Nozzles High Temperature Tip Wear-resistant Nozzle for Anycubic Cobra 2 / Kobra 2 Neo / Kobra 2 Pro / Kobra 2 Plus 3D Printer Replacement (5
£22.99- Material: MK8 hardened nozzles are made of high quality stainless steel. The nozzle is not easy to stick filament with high hardness, resistant to wear.
- Size: 0.4 mm stainless steel nozzles with 1.75 mm PLA/ABS/PETG/TPU/wood filament.
Xberstar
XBERSTAR 2PCS Hotend Silicone Sock Heater Block Protective Silicone Cover Case Compatible withCreality K1/K1 Max Nozzle Hotend Extruder 3D Printers (BLACK)
£5.99- Silicone cover made of heat-resistant silicone, non-stick silicone material. It has non-stick properties
- Good insulation properties, low shrinkage at high temperatures
Seafront
3D Printer Nozzle Kit Extruder with 3Pcs Brass Extruder Nozzle1.75 Dia for Anycubic Vyper Kobra Sovol Sv06 Plus Sv07 (1.75/0.4mm)
£6.50- APPLICABLE MODEL: 3D printer nozzle kit includes 3 pieces brass extruder nozzle, possess high , high temperature resistant, suitable for Creality K1, for Anycubic Vyper, for Kobra, for Sovol Sv06 Plus, for Sv07
- FAST： The thermal conductivity of brass is up to 330W/m·k, bringing high and high speed printing, ensuring that the nozzle is heated more evenly. The volume is twice that of the ordinary nozzle, support high speed printing of 600mm, and the uniform plating layer on the greatly reduce the adhesion of the fine wire to the nozzle
Marhynchus
Dual Z Axes Upgrade Kit, Ender 3 Dual Z Axis Kit, Dual Z Axes Upgrade Kit, 3D Printer Z Axes Kit for Ender 3, Ender 3 Pro, 3D Printer Accessories
£23.60- Easy Installation: Comes with light weight and compact size as well, has complete accessories to simplify the installation.
- Printing Smoother: Dual Z axes can effectively reduce filament clogging to make the printing smoother and improve the effects.
Heibteny
Up to 500°C 3D upgraded for Bambu Lab Hot-End Version Hardened Steel Nozzle Kit
£21.07- *This kit is an updated version, the heating block is upgraded to chrome zirconia copper with nickel plated treatment,
- The product is resistant to high temperature pressure at 500C degrees and conducts heat quickly.
Hzdadeve
HzdaDeve 241 x 254 mm PEI PEY Sheet for Prusa I3 MK3 MK3S+ MK2.5S Building Plate Heated Bed Spring Steel Flexible Platform One Side Textured and One Side Smooth Board for 3D Printer
£33.99- PEI+PEY DESIGN One side is a textured PEI bed that presents the frosted sticker surface with a distinctive matte touch. Another side is smooth PEY sheet, which has a pattern of stars and dots that glow brightly. It shows different patterns at different light intensities. In addition, different colours remain on the print model.
- Compatible Printer The PEI and PEY building plate is for Prusa I3 MK3 MK3S MK3S+ MK2.5S 3D printers.
Anycubic
ANYCUBIC 3D Printer Wash and Cure 3 Plus, Larger 2 in 1 Wash Cure Machine for ANYCUBIC Photon Mono 6Ks Mars with Gooseneck Lights, IPA-Saving & Efficient Curing, Washing Size 8.97” x 5.04” x 10.24”
£210.00- 【Size Upgraded, Capacity Increased】Compared with Anycubic wash & cure plus, wash and cure 3 plus’s washing basket volume is increased by about 13.4% to 7.6L, and total volume of the washing bucket is 12L, which is suitable for LCD 3D printers of 10.6'' and below.
- 【Partial Enhanced Curing】The innovative Flexicure gooseneck lights increases the energy value by 30,000uW/cm²over a 1-3 cm irradiation range, thus taking good care of delicate areas such as the top of the model or figure details.
Create Idea
1 Set Extruder Hotend Kit 3D Printer Nozzle Extruder Assembly 24V 40W Replacement Accessoiry Compatible with Anycubic Kobra
£6.62- Compatible with Anycubic Kobra.
- Usage: The extruder assembly is a perfect replacement accessory for 3D printer.
Xromtbem
xromtbem 3D Printer Parts SLA Dlp Resin Special Tool Set Plastic Shovel Removal Tool Spatula for Resin for Tank 2pcs Trim Removal Tool Set Film
£3.23- Professional 3D print removal tool, will not scratch build surface.
- Temperature resistant and not easy to break.
Unitak3d
Photon MONO M5s FEP Release Film 210 * 290mm,3D Printer Accessories Compatible with Anycubic Photon MONO M5s and Photon MONO M5 UV DLP LCD Resin 3D Printer-0.15 Thickness(5pcs)
£24.99- 【Application】:Work perfectly on Photon MONO M5s and Photon MONO M5 10.1 inch resin 3D printer.Product Size:290x210mmx0.15mm
- 【Non-tacky】：High cleanliness product surface provides good performance of peeling and durability.
Hzdadeve
HzdaDeve Stainless Steel Nozzles 0.4 mm Thread Hardened Nozzles High Temperature Tip Wear-resistant Nozzle for Anycubic Cobra 2 / Kobra 2 Neo / Kobra 2 Pro / Kobra 2 Plus 3D Printer Replacement (5
£22.99- Material: MK8 hardened nozzles are made of high quality stainless steel. The nozzle is not easy to stick filament with high hardness, resistant to wear.
- Size: 0.4 mm stainless steel nozzles with 1.75 mm PLA/ABS/PETG/TPU/wood filament.
Xberstar
XBERSTAR 2PCS Hotend Silicone Sock Heater Block Protective Silicone Cover Case Compatible withCreality K1/K1 Max Nozzle Hotend Extruder 3D Printers (BLACK)
£5.99- Silicone cover made of heat-resistant silicone, non-stick silicone material. It has non-stick properties
- Good insulation properties, low shrinkage at high temperatures
Seafront
3D Printer Nozzle Kit Extruder with 3Pcs Brass Extruder Nozzle1.75 Dia for Anycubic Vyper Kobra Sovol Sv06 Plus Sv07 (1.75/0.4mm)
£6.50- APPLICABLE MODEL: 3D printer nozzle kit includes 3 pieces brass extruder nozzle, possess high , high temperature resistant, suitable for Creality K1, for Anycubic Vyper, for Kobra, for Sovol Sv06 Plus, for Sv07
- FAST： The thermal conductivity of brass is up to 330W/m·k, bringing high and high speed printing, ensuring that the nozzle is heated more evenly. The volume is twice that of the ordinary nozzle, support high speed printing of 600mm, and the uniform plating layer on the greatly reduce the adhesion of the fine wire to the nozzle
Marhynchus
Dual Z Axes Upgrade Kit, Ender 3 Dual Z Axis Kit, Dual Z Axes Upgrade Kit, 3D Printer Z Axes Kit for Ender 3, Ender 3 Pro, 3D Printer Accessories
£23.60- Easy Installation: Comes with light weight and compact size as well, has complete accessories to simplify the installation.
- Printing Smoother: Dual Z axes can effectively reduce filament clogging to make the printing smoother and improve the effects.
Heibteny
Up to 500°C 3D upgraded for Bambu Lab Hot-End Version Hardened Steel Nozzle Kit
£21.07- *This kit is an updated version, the heating block is upgraded to chrome zirconia copper with nickel plated treatment,
- The product is resistant to high temperature pressure at 500C degrees and conducts heat quickly.
Hzdadeve
HzdaDeve 241 x 254 mm PEI PEY Sheet for Prusa I3 MK3 MK3S+ MK2.5S Building Plate Heated Bed Spring Steel Flexible Platform One Side Textured and One Side Smooth Board for 3D Printer
£33.99- PEI+PEY DESIGN One side is a textured PEI bed that presents the frosted sticker surface with a distinctive matte touch. Another side is smooth PEY sheet, which has a pattern of stars and dots that glow brightly. It shows different patterns at different light intensities. In addition, different colours remain on the print model.
- Compatible Printer The PEI and PEY building plate is for Prusa I3 MK3 MK3S MK3S+ MK2.5S 3D printers.