Aptofun
1-5 of 200 results
Sxhlseller
Extension Card, Plug and Play PCI-E Cards PCI Express to SATA 3.0 2-Port SATA III 6Gbps Expansion Adapter Boards
£13.93- Large chassis / small chassis can be used.
- Support IDE / AHCI programming interface.
Lazmin
Lazmin 8 Port PCI-E to SATA3.0 Controller, PCI Express to SATA3.0 8-Port SATA III Expansion Controller Card Adapter
£49.04- Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0; PCI-Express v2.0 compliant, backward compatible with PCI-Express v1.0.
- Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps; supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i.
Syba
Syba SY-PEX40039 2 Port SATA 6Gbps PCI-Express x1 2.0 Card,Green
£20.99- Asm1061 chipset (asmedia 1061 sata host controller)
- Compliant with pci-express specification v2. 0 and backward compatible with pci-express 1. X
Io Crest
IO Crest 2 Port SATA III PCI-E 3.0 x1 Controller Card (Jmicro Chipset), add Two SATA 3.0 devices to any PCIe slot
£15.57- Compatible with PCI Express Base Specification Revision 3. 1A
- Compliant with Serial ATA AHCI (advanced host controller interface) Specification Rev 1. 0, Supports SATA 3. 0 transfer rate up to 6Gbps. Maximum sequential read/ write speed 850 MB/s
Diyeeni
Diyeeni Dual M.2 PCIe Adapter, PCIE to M.2 SATA+NVME Dual Disk Expansion Card for 2230 2242 2260 2280 22110 Size M.2 SSD
£9.35- Integrated high-speed signal enhancement technology, support M.2 SATA and M.2 NVME SSD, one card and two discs, humanized LED work indicator, PCIE 3.0 GEN3x4 full speed design.In order to better heat dissipation, the expensive double-sided copper strip is used to make the PCBA become a heat sink.
- In order to be more stable and more durable, use large-capacity solid capacitor voltage regulator filter.Low-impedance multilayer PCBA, integrated high-speed signal enhancement technology, high-speed signal integrity test self-test without delay, smooth operation.
Aptofun
AptoFun Sensor Shield V5 Expansion Board For Arduino UNO R3
£8.17- Sensor Shield V5 Expansion Board For Arduino UNO R3
- UNO R3 Sensor
Mavis Laven
Mavis Laven SATA III PCIe 3.0 X1 Controller Card, PCI-E Cards PCI Express to SATA 3.0 2-Port SATA III 6Gbps Expansion Adapter Boards
£11.12- Large chassis / small chassis can be used.
- Support IDE / AHCI programming interface.
Gintooyun
GINTOOYUN U.2 to PCIE Expansion Card，SFF 8639 to PCIE 3.0 x4 Riser Card,PCI-E 3.0 X4 SATA Adapter,For 2.5" U.2 NVME SSD And 2.5" SATA SSD.
£29.99- 【U.2 to PCI-E x4 Expansion Card】 Use the PCE-E x4 expansion slot to add 2.5" U.2 NVME SSD or 2.5" SATA SSD to your PC to improve system performance and expand the overall internal storage,support WIN8 WIN10 32/64BIT/MAC/Linux system
- 【Dual Interface And Dual Protocol】 it is compatible with U.2 and SATA interfaces and protocols. It supplies power to the hard disk through the PCIe slot, and does not need to be connected to the power supply line. The U.2 SSD can be used directly without data cable,and the SATA data line needs to be connected when using the SATA SSD
Kafuty
Kafuty PCI-E SATA Expansion Card, 6-Port PCI Express SATA 3.0 Controller Card Compatible for SATA6G 3G 1.5G Hard Drives, Support Hot Swap
£37.23- Compliant with Serial SATA 3.0 specification, backward compatible with SATA2.0 SATA1.0.
- Compliant with PCI-Express v2.0 specification and backward compatible with PCI-Express v1.0.
Eliater
ELIATER PCIe SATA Card 10 Port with 10 SATA Cables, SATA III 6 Gbps SATA Controller Expansion Card with Low Profile Bracket for Desktop PC, ASM1062+JMB585 Chip, Support 10 SATA 3.0 Devices
£81.80- 【PCIe to SATA 3.0 10 Ports Expansion Card】 Using a PCIe SATA card and 10 SATA cables, you can add 10 SATA 3.0 6Gbps / s devices to your computer.Also, it is a simple and small solution to expand your sata storage by 10x.
- 【High Performance Chipset】 The 10-port SATA controller based on JMB585+ASM1062 chipset offers more stable, with heat sink, long-lasting high temperature resistance, providing speed up to 1700 MB/s.
Aptofun
AptoFun Dot Matrix MAX7219 Module MCU LED Display control Kit for Arduino/Rasperry Pi
£8.99- A single module can drive an 8 * 8 common cathode lattice
- Module with input and output interfaces, supports multiple modules cascade
Aptofun
AptoFun StepStick Motor Driver A4988 / Stepper Motor Driver A4988 with heat sink for RepRap 3D printer compatible with Arduino (with 2 oz copper PCB for improved heat dissipation, max 2A)
£5.86- Power Supply: 5V / 3.3V; Motor voltage: 8V - 35V
- Current: max 2A (only with heat sink); Steps: 1/1 - 1/2 - 1/4 - 1/8 - 1/16
Aptofun
AptoFun TFT 3.2" Shield for Arduino Mega2560
£7.74- This TFT 3.2" shield supports TFT01LCD on Arduino board!
- Because TFT01LCD needs 3 V voltage to work, so it cannot be used directly on the standard Arduino motherboard. But with our TFT Shield this is possible!
Aptofun
Nano (1X, Red)
£9.13- 20 digital input/output ports D0 ~ D13, A0 ~ A5; 8 analog inputs A0 ~ A7;
- 1 pair of ports TTL level serial transceiver RX / TX; 6 PWM ports, D3, D5, D6, D9, D10, D11;
Aptofun
AptoFun 3 Stück 40x20 cm male- male for raspberry pi kabel/arduino kabel/steckbrücken kabel/fdd kabel
£5.90- 3 pieces 40x20 cm male-male for raspberry pi cable / arduino cable / jumper cable / fdd cable
- Expandable, easy and safe to use for Arduino and Raspberry pi3 applications
Aptofun
AptoFun USB 2.0 Card Reader microSD/microSDHC/microSDXC, SD/SDHC/SDXC for Smartphone/Tablet/Digital Camera/Laptop
£2.58- USB 2.0 SD/microSD card reader for direct data exchange between memory cards and PCs, notebooks, smartphones and tablet PCs, compact card reader for all popular SD card formats such as SD/SDHC/SDXC and microSD/microSDHC/microSDXC
- Combination of USB type A male and USB micro male type B, USB type A male for PCs and notebooks, USB micro plug type B for smartphones and tablet PCs, especially for host/OTG-enabled smartphones and tablet PCs
Aptofun
AptoFun 5 pcs 4.5 * 16 MM (D4B4) potentiometer knob Mini Cap Button
£3.10- 5 x potentiometer control knob in black
- Eulenloch -diameter: 4.5 * 16 MM
Aptofun
AptoFun USB 3.0 A Male to B Male Cable 1 m Blue
£3.65- USB 3.0 cable in blue - up to 5 Gbit/s
- Backwards compatible with USB 2.0
Aptofun
AptoFun Transparent Case for Raspberry Pi 2 Model B/Model B+
£5.00- Our transparent housing is high quality ABS housing, it is easy to screw firmly. Suitable for Raspberry Pi 2 / Model B+
Aptofun
AptoFun Dot Matrix MAX7219 Module MCU LED Display control Kit for Arduino/Rasperry Pi
£8.99- A single module can drive an 8 * 8 common cathode lattice
- Module with input and output interfaces, supports multiple modules cascade
Aptofun
AptoFun StepStick Motor Driver A4988 / Stepper Motor Driver A4988 with heat sink for RepRap 3D printer compatible with Arduino (with 2 oz copper PCB for improved heat dissipation, max 2A)
£5.86- Power Supply: 5V / 3.3V; Motor voltage: 8V - 35V
- Current: max 2A (only with heat sink); Steps: 1/1 - 1/2 - 1/4 - 1/8 - 1/16
Aptofun
AptoFun TFT 3.2" Shield for Arduino Mega2560
£7.74- This TFT 3.2" shield supports TFT01LCD on Arduino board!
- Because TFT01LCD needs 3 V voltage to work, so it cannot be used directly on the standard Arduino motherboard. But with our TFT Shield this is possible!
Aptofun
Nano (1X, Red)
£9.13- 20 digital input/output ports D0 ~ D13, A0 ~ A5; 8 analog inputs A0 ~ A7;
- 1 pair of ports TTL level serial transceiver RX / TX; 6 PWM ports, D3, D5, D6, D9, D10, D11;
Aptofun
AptoFun 3 Stück 40x20 cm male- male for raspberry pi kabel/arduino kabel/steckbrücken kabel/fdd kabel
£5.90- 3 pieces 40x20 cm male-male for raspberry pi cable / arduino cable / jumper cable / fdd cable
- Expandable, easy and safe to use for Arduino and Raspberry pi3 applications
Aptofun
AptoFun USB 2.0 Card Reader microSD/microSDHC/microSDXC, SD/SDHC/SDXC for Smartphone/Tablet/Digital Camera/Laptop
£2.58- USB 2.0 SD/microSD card reader for direct data exchange between memory cards and PCs, notebooks, smartphones and tablet PCs, compact card reader for all popular SD card formats such as SD/SDHC/SDXC and microSD/microSDHC/microSDXC
- Combination of USB type A male and USB micro male type B, USB type A male for PCs and notebooks, USB micro plug type B for smartphones and tablet PCs, especially for host/OTG-enabled smartphones and tablet PCs
Aptofun
AptoFun 5 pcs 4.5 * 16 MM (D4B4) potentiometer knob Mini Cap Button
£3.10- 5 x potentiometer control knob in black
- Eulenloch -diameter: 4.5 * 16 MM
Aptofun
AptoFun USB 3.0 A Male to B Male Cable 1 m Blue
£3.65- USB 3.0 cable in blue - up to 5 Gbit/s
- Backwards compatible with USB 2.0
Aptofun
AptoFun Transparent Case for Raspberry Pi 2 Model B/Model B+
£5.00- Our transparent housing is high quality ABS housing, it is easy to screw firmly. Suitable for Raspberry Pi 2 / Model B+
Aptofun
AptoFun Dot Matrix MAX7219 Module MCU LED Display control Kit for Arduino/Rasperry Pi
£8.99- A single module can drive an 8 * 8 common cathode lattice
- Module with input and output interfaces, supports multiple modules cascade
Aptofun
AptoFun StepStick Motor Driver A4988 / Stepper Motor Driver A4988 with heat sink for RepRap 3D printer compatible with Arduino (with 2 oz copper PCB for improved heat dissipation, max 2A)
£5.86- Power Supply: 5V / 3.3V; Motor voltage: 8V - 35V
- Current: max 2A (only with heat sink); Steps: 1/1 - 1/2 - 1/4 - 1/8 - 1/16
Aptofun
AptoFun TFT 3.2" Shield for Arduino Mega2560
£7.74- This TFT 3.2" shield supports TFT01LCD on Arduino board!
- Because TFT01LCD needs 3 V voltage to work, so it cannot be used directly on the standard Arduino motherboard. But with our TFT Shield this is possible!
Aptofun
Nano (1X, Red)
£9.13- 20 digital input/output ports D0 ~ D13, A0 ~ A5; 8 analog inputs A0 ~ A7;
- 1 pair of ports TTL level serial transceiver RX / TX; 6 PWM ports, D3, D5, D6, D9, D10, D11;
Aptofun
AptoFun 3 Stück 40x20 cm male- male for raspberry pi kabel/arduino kabel/steckbrücken kabel/fdd kabel
£5.90- 3 pieces 40x20 cm male-male for raspberry pi cable / arduino cable / jumper cable / fdd cable
- Expandable, easy and safe to use for Arduino and Raspberry pi3 applications
Aptofun
AptoFun USB 2.0 Card Reader microSD/microSDHC/microSDXC, SD/SDHC/SDXC for Smartphone/Tablet/Digital Camera/Laptop
£2.58- USB 2.0 SD/microSD card reader for direct data exchange between memory cards and PCs, notebooks, smartphones and tablet PCs, compact card reader for all popular SD card formats such as SD/SDHC/SDXC and microSD/microSDHC/microSDXC
- Combination of USB type A male and USB micro male type B, USB type A male for PCs and notebooks, USB micro plug type B for smartphones and tablet PCs, especially for host/OTG-enabled smartphones and tablet PCs
Aptofun
AptoFun 5 pcs 4.5 * 16 MM (D4B4) potentiometer knob Mini Cap Button
£3.10- 5 x potentiometer control knob in black
- Eulenloch -diameter: 4.5 * 16 MM
Aptofun
AptoFun USB 3.0 A Male to B Male Cable 1 m Blue
£3.65- USB 3.0 cable in blue - up to 5 Gbit/s
- Backwards compatible with USB 2.0
Aptofun
AptoFun Transparent Case for Raspberry Pi 2 Model B/Model B+
£5.00- Our transparent housing is high quality ABS housing, it is easy to screw firmly. Suitable for Raspberry Pi 2 / Model B+