Bigtreetech
1-1 of 40 results
Bigtreetech
BIGTREETECH EZ2209 V1.0 Stepper Motor Driver 5 Pieces Stepstick Mute EZ2209 Compatible with SKR 3 EZ Manta E3 EZ 3D Printer Controller Motherboard
£25.99- 【Wide Application】Size: 18.5*19.8mm, drive current 1.6A, peak current 2A, voltage range 12V-24V, 256 subdivision. The BTT EZ2209 stepper motor driver can be used directly with the Mnata E3 EZ and SKR 3 EZ motherboard. EZ2209 can also work well with I3 Mega, Octopus V1.2, SKR 3 and other common motherboards by using the BTT EZ driver connector.
- Better heat dissipation: an innovative 2-in-1 combination of stepper driver and new large aluminium heat sink allows the EZ2209 stepper motor driver better heat dissipation, lowers energy consumption to a minimum and protects the driver chip from external damage.
Bigtreetech
BIGTREETECH Manta E3 EZ Control Board 32Bit, New Upgrade Silent Board Supports Klipper Firmware with CM4/CB1, Compatible EZ2209 Stepper Motor Driver for Ender-3 3D Printer
£67.99- Take the ARM Cortex-M0+ series STM32G0B1RE master chip with a 32-bit main frequency of 64 MHz
- The maximum power supply of the motor is 56 V, and for the larger voltage when using EZ5160, the insulation chip is used to protect the main controller from burning IO
Bigtreetech
BIGTREETECH New Upgrade EZ2209 Stepper Motor Driver with EZ-Driver Connection V1.0 Support UART Mode for SKR V1.4 Turbo, SKR 2, SKR 3 SKR Pro V1.2, Octopus, Octopus Pro 3D Controller Board (5 Sets)
£36.07- ✨Why use EZ Drivers? Because 40% of users have damaged the driver due to the wrong installation. It will damage the control board or even more damage. Using EZ Drivers can improve the experience of more users.
- ✨The newly developed board frame is used to match the new connector to improve the user experience. Using a new customized heat sink, while enhancing the heat dissipation capacity, it protects the driver chip from external damage.
Bigtreetech
BIGTREETECH Octopus Max EZ V1.0 Control Board 32 Bit New Upgrade Octopus Pro Motherboard Compatible EZ2209 Step Driver Support Kliper Firmware DIY Upgrade 3D Printer
£99.99- 【MCU】 Adopts the 32-bit master chip of the ARM Cortex-M7 series STM32H723ZET6 with a main frequency of 550 MHz
- 【E-Fuse】Upgraded with eFuse protection, which reacts faster with strong protection and effectively protects the motherboard from damage caused by short circuit, overcurrent, etc
Bigtreetech
BIGTREETECH Manta E3 EZ Control Board 32Bit, New Upgrade Silent Board Support Running Klipper Firmware with CM4/CB1, Compatible EZ2209 Stepper Motor Driver for Ender-3 3D Printer
£64.04- Adopt ARM Cortex-M0+series STM32G0B1RE master chip with 32-bit main frequency of 64MHz;
- The maximum power supply of the motor is 56V, and for the larger voltage when using EZ5160, the isolation chip is used to protect the main controller from burning IO.
Bigtreetech
BIGTREETECH SKR V1.4 Control Board 32bit Upgrade SKR V1.3 Motherboard, Compatible TFT35/TFT35 E3/TFT70 Touch Screen Mini12864 LCD Support TMC2209/EZ2209/TMC2208/TMC5160 for Most FDM 3D Printer
£35.62- ⭐Using 32-bit 100MHz ARM-class Cortex-M3 series LPC1768 main control chip, the performance is greatly improved.
- ⭐Equipped with highly modular open source firmware Marlin 2.0, which is convenient for users to DIY and secondary development.
Bigtreetech
BIGTREETECH EZ2209 V1.0 Stepper Motor Driver 5 Pieces Stepstick Mute EZ2209 Compatible with SKR 3 EZ Manta E3 EZ 3D Printer Controller Motherboard
£25.99- 【Wide Application】Size: 18.5*19.8mm, drive current 1.6A, peak current 2A, voltage range 12V-24V, 256 subdivision. The BTT EZ2209 stepper motor driver can be used directly with the Mnata E3 EZ and SKR 3 EZ motherboard. EZ2209 can also work well with I3 Mega, Octopus V1.2, SKR 3 and other common motherboards by using the BTT EZ driver connector.
- Better heat dissipation: an innovative 2-in-1 combination of stepper driver and new large aluminium heat sink allows the EZ2209 stepper motor driver better heat dissipation, lowers energy consumption to a minimum and protects the driver chip from external damage.
Bigtreetech
BIGTREETECH Manta E3 EZ Control Board 32Bit, New Upgrade Silent Board Supports Klipper Firmware with CM4/CB1, Compatible EZ2209 Stepper Motor Driver for Ender-3 3D Printer
£67.99- Take the ARM Cortex-M0+ series STM32G0B1RE master chip with a 32-bit main frequency of 64 MHz
- The maximum power supply of the motor is 56 V, and for the larger voltage when using EZ5160, the insulation chip is used to protect the main controller from burning IO
Bigtreetech
BIGTREETECH New Upgrade EZ2209 Stepper Motor Driver with EZ-Driver Connection V1.0 Support UART Mode for SKR V1.4 Turbo, SKR 2, SKR 3 SKR Pro V1.2, Octopus, Octopus Pro 3D Controller Board (5 Sets)
£36.07- ✨Why use EZ Drivers? Because 40% of users have damaged the driver due to the wrong installation. It will damage the control board or even more damage. Using EZ Drivers can improve the experience of more users.
- ✨The newly developed board frame is used to match the new connector to improve the user experience. Using a new customized heat sink, while enhancing the heat dissipation capacity, it protects the driver chip from external damage.
Bigtreetech
BIGTREETECH Octopus Max EZ V1.0 Control Board 32 Bit New Upgrade Octopus Pro Motherboard Compatible EZ2209 Step Driver Support Kliper Firmware DIY Upgrade 3D Printer
£99.99- 【MCU】 Adopts the 32-bit master chip of the ARM Cortex-M7 series STM32H723ZET6 with a main frequency of 550 MHz
- 【E-Fuse】Upgraded with eFuse protection, which reacts faster with strong protection and effectively protects the motherboard from damage caused by short circuit, overcurrent, etc
Bigtreetech
BIGTREETECH Manta E3 EZ Control Board 32Bit, New Upgrade Silent Board Support Running Klipper Firmware with CM4/CB1, Compatible EZ2209 Stepper Motor Driver for Ender-3 3D Printer
£64.04- Adopt ARM Cortex-M0+series STM32G0B1RE master chip with 32-bit main frequency of 64MHz;
- The maximum power supply of the motor is 56V, and for the larger voltage when using EZ5160, the isolation chip is used to protect the main controller from burning IO.
Bigtreetech
BIGTREETECH SKR V1.4 Control Board 32bit Upgrade SKR V1.3 Motherboard, Compatible TFT35/TFT35 E3/TFT70 Touch Screen Mini12864 LCD Support TMC2209/EZ2209/TMC2208/TMC5160 for Most FDM 3D Printer
£35.62- ⭐Using 32-bit 100MHz ARM-class Cortex-M3 series LPC1768 main control chip, the performance is greatly improved.
- ⭐Equipped with highly modular open source firmware Marlin 2.0, which is convenient for users to DIY and secondary development.
Bigtreetech
BIGTREETECH EZ2209 V1.0 Stepper Motor Driver 5 Pieces Stepstick Mute EZ2209 Compatible with SKR 3 EZ Manta E3 EZ 3D Printer Controller Motherboard
£25.99- 【Wide Application】Size: 18.5*19.8mm, drive current 1.6A, peak current 2A, voltage range 12V-24V, 256 subdivision. The BTT EZ2209 stepper motor driver can be used directly with the Mnata E3 EZ and SKR 3 EZ motherboard. EZ2209 can also work well with I3 Mega, Octopus V1.2, SKR 3 and other common motherboards by using the BTT EZ driver connector.
- Better heat dissipation: an innovative 2-in-1 combination of stepper driver and new large aluminium heat sink allows the EZ2209 stepper motor driver better heat dissipation, lowers energy consumption to a minimum and protects the driver chip from external damage.
Bigtreetech
BIGTREETECH Manta E3 EZ Control Board 32Bit, New Upgrade Silent Board Supports Klipper Firmware with CM4/CB1, Compatible EZ2209 Stepper Motor Driver for Ender-3 3D Printer
£67.99- Take the ARM Cortex-M0+ series STM32G0B1RE master chip with a 32-bit main frequency of 64 MHz
- The maximum power supply of the motor is 56 V, and for the larger voltage when using EZ5160, the insulation chip is used to protect the main controller from burning IO
Bigtreetech
BIGTREETECH New Upgrade EZ2209 Stepper Motor Driver with EZ-Driver Connection V1.0 Support UART Mode for SKR V1.4 Turbo, SKR 2, SKR 3 SKR Pro V1.2, Octopus, Octopus Pro 3D Controller Board (5 Sets)
£36.07- ✨Why use EZ Drivers? Because 40% of users have damaged the driver due to the wrong installation. It will damage the control board or even more damage. Using EZ Drivers can improve the experience of more users.
- ✨The newly developed board frame is used to match the new connector to improve the user experience. Using a new customized heat sink, while enhancing the heat dissipation capacity, it protects the driver chip from external damage.
Bigtreetech
BIGTREETECH Octopus Max EZ V1.0 Control Board 32 Bit New Upgrade Octopus Pro Motherboard Compatible EZ2209 Step Driver Support Kliper Firmware DIY Upgrade 3D Printer
£99.99- 【MCU】 Adopts the 32-bit master chip of the ARM Cortex-M7 series STM32H723ZET6 with a main frequency of 550 MHz
- 【E-Fuse】Upgraded with eFuse protection, which reacts faster with strong protection and effectively protects the motherboard from damage caused by short circuit, overcurrent, etc
Bigtreetech
BIGTREETECH Manta E3 EZ Control Board 32Bit, New Upgrade Silent Board Support Running Klipper Firmware with CM4/CB1, Compatible EZ2209 Stepper Motor Driver for Ender-3 3D Printer
£64.04- Adopt ARM Cortex-M0+series STM32G0B1RE master chip with 32-bit main frequency of 64MHz;
- The maximum power supply of the motor is 56V, and for the larger voltage when using EZ5160, the isolation chip is used to protect the main controller from burning IO.
Bigtreetech
BIGTREETECH SKR V1.4 Control Board 32bit Upgrade SKR V1.3 Motherboard, Compatible TFT35/TFT35 E3/TFT70 Touch Screen Mini12864 LCD Support TMC2209/EZ2209/TMC2208/TMC5160 for Most FDM 3D Printer
£35.62- ⭐Using 32-bit 100MHz ARM-class Cortex-M3 series LPC1768 main control chip, the performance is greatly improved.
- ⭐Equipped with highly modular open source firmware Marlin 2.0, which is convenient for users to DIY and secondary development.
Bigtreetech
BIGTREETECH EZ2209 V1.0 Stepper Motor Driver 5 Pieces Stepstick Mute EZ2209 Compatible with SKR 3 EZ Manta E3 EZ 3D Printer Controller Motherboard
£25.99- 【Wide Application】Size: 18.5*19.8mm, drive current 1.6A, peak current 2A, voltage range 12V-24V, 256 subdivision. The BTT EZ2209 stepper motor driver can be used directly with the Mnata E3 EZ and SKR 3 EZ motherboard. EZ2209 can also work well with I3 Mega, Octopus V1.2, SKR 3 and other common motherboards by using the BTT EZ driver connector.
- Better heat dissipation: an innovative 2-in-1 combination of stepper driver and new large aluminium heat sink allows the EZ2209 stepper motor driver better heat dissipation, lowers energy consumption to a minimum and protects the driver chip from external damage.
Bigtreetech
BIGTREETECH Manta E3 EZ Control Board 32Bit, New Upgrade Silent Board Supports Klipper Firmware with CM4/CB1, Compatible EZ2209 Stepper Motor Driver for Ender-3 3D Printer
£67.99- Take the ARM Cortex-M0+ series STM32G0B1RE master chip with a 32-bit main frequency of 64 MHz
- The maximum power supply of the motor is 56 V, and for the larger voltage when using EZ5160, the insulation chip is used to protect the main controller from burning IO
Bigtreetech
BIGTREETECH New Upgrade EZ2209 Stepper Motor Driver with EZ-Driver Connection V1.0 Support UART Mode for SKR V1.4 Turbo, SKR 2, SKR 3 SKR Pro V1.2, Octopus, Octopus Pro 3D Controller Board (5 Sets)
£36.07- ✨Why use EZ Drivers? Because 40% of users have damaged the driver due to the wrong installation. It will damage the control board or even more damage. Using EZ Drivers can improve the experience of more users.
- ✨The newly developed board frame is used to match the new connector to improve the user experience. Using a new customized heat sink, while enhancing the heat dissipation capacity, it protects the driver chip from external damage.
Bigtreetech
BIGTREETECH Octopus Max EZ V1.0 Control Board 32 Bit New Upgrade Octopus Pro Motherboard Compatible EZ2209 Step Driver Support Kliper Firmware DIY Upgrade 3D Printer
£99.99- 【MCU】 Adopts the 32-bit master chip of the ARM Cortex-M7 series STM32H723ZET6 with a main frequency of 550 MHz
- 【E-Fuse】Upgraded with eFuse protection, which reacts faster with strong protection and effectively protects the motherboard from damage caused by short circuit, overcurrent, etc
Bigtreetech
BIGTREETECH Manta E3 EZ Control Board 32Bit, New Upgrade Silent Board Support Running Klipper Firmware with CM4/CB1, Compatible EZ2209 Stepper Motor Driver for Ender-3 3D Printer
£64.04- Adopt ARM Cortex-M0+series STM32G0B1RE master chip with 32-bit main frequency of 64MHz;
- The maximum power supply of the motor is 56V, and for the larger voltage when using EZ5160, the isolation chip is used to protect the main controller from burning IO.
Bigtreetech
BIGTREETECH SKR V1.4 Control Board 32bit Upgrade SKR V1.3 Motherboard, Compatible TFT35/TFT35 E3/TFT70 Touch Screen Mini12864 LCD Support TMC2209/EZ2209/TMC2208/TMC5160 for Most FDM 3D Printer
£35.62- ⭐Using 32-bit 100MHz ARM-class Cortex-M3 series LPC1768 main control chip, the performance is greatly improved.
- ⭐Equipped with highly modular open source firmware Marlin 2.0, which is convenient for users to DIY and secondary development.