[±5% ACCURACY] The viscometer uses a graduated disk, and the viscosity values are measured by moving the rotor rotation through the spinneret and spindle, has a large viscosity measurement range 10-100,000cps and the measurement error: ±5%, give your enough resolution to control my processes better.
[ROTORS x ROTATION RATE] Different rotors (1,2,3,4) can be selected according to the viscosity range of different test liquids, and different speed (60,30,12,6) can be set. The knob adjustment is straightforward with a coefficient table on the top for easy reference. You can unlock more unknown liquid viscosity.
【Precise & Credible】 The Stainless Steel Cup is made by precise mold, and the orifice is drilled using precise high-speed CNC. It's calibrated against National Institute of Standards and Technology (NIST). Therefore, you will get accurate and believable measurements with this Zahn Cup.
【Durable Viscosity Cup】Our dip viscosity cups are made of premium 304 stainless steel, corrosion-resistant and solvent-resistant, thickened cup and bottom, polished surface and smooth inside, easy to clean.
★It is made of relevant standards-ASTM D1200-2010《 Standard Test Method for Viscosity by Ford Viscosity Cup》
★The correction coefficient value “K” is the time after the filling of the viscosity cup with the secondary standard oil under the set temperature conditions (such as 20 °C ± 0.1 °C), the flow time should be in the range of 30s ~ 100s, the K value should be 1 ± Within 0.03 range. The viscometer should be periodically calibrated to the extent of its frequency of use.