Hhip
1-10 of 400 results

20° Gear Cutter, 8Pcs Gear Cutter, High Speed Steel Cutting Tool Industrial Supplies M1.5 20 5mm 6mm for Milling Gears, Square Nose End Mills

• There are a total of 8 sets of gear cutting tools to suit different numbers of teeth.
• This gear milling cutter is a special cutting tool specially designed for milling gears. Can be used with peace of mind

1pcs 100 * 0.5 * 40Z HSS Battery Special for Plate Cutting Gear Cutters

• Outside Dia: 100mm
• Inner Bore: 25mm

sourcing map 63Pcs Plastic Gear Package Kit DIY Gear Assortment Accessories Set for Motor Robot Various Gear Axle Belt Bushings

• The Gear Package included: spindle, single/double crown gear, pulley, rack, bevel gear, copper gear, bushings, axles, tires, rubber bands and so on, more accessories that you need for diy robots/motors.
• Multi-uses, you can use it to fix the broken part,Great for diy science and small production, product design and mechanical model.

8PCS Involute Gear Milling Cutter Set, Milling Cutter Gear Cutting Tools, Inside Bore Diameter 22mm Gear Cutting

• Superior material: It is made of high-speed steel material, with high hardness, rust-proof and not easy to oxidize, strong and durable, and long service life.
• Special tools: Gear milling cutters are specially designed for tooth milling. Milling cutters can adapt to different numbers of teeth, basically meeting your needs.

8Pcs Involute Gear Cutters Set, High Speed Steel Cutting Tools, 14.5 Pressure Angle, Milling Machine High Speed Steel Disk-Shaped (14.5° 55mm 22mm)

• Material: Using high speed steel materials, strong and durable, has a long service life
• Specification: The outer diameter is 55mm, the inner diameter is 22mm and the pressure angle is 14.5°

Involute Gear Milling Cutter High Speed Steel Fine Punching, Milling Cutter Gear Cutting Tools with Large Cut out Design

• High Hardness: High temperature quenching heat treatment strengthens the overall hardness, making it more comfortable to use.
• Smooth Installation: The milling cutter is integrally formed without burrs, has smooth surfaces, smooth installation and easy installation.

2Pcs Milling Cutter, Tungsten Steel 4 Flutes CNC Router Bits Woodworking Cutting Tools 4 x 75 x 4T

• Excellent Performance: The flat-bottom milling cutter adopts ultra-fine grained cemented carbide material, which has good milling and cutting performance.
• Efficient: The cutting edge is sharping and the surface is free of burrs, the ultra‑fine cemented carbide material can ensure its engraving and milling performance.

HHIP 2041-2051 20P #5 14.5 Degree Gear Cutter

• Cutter diameter is 2-3/8"; Arbor hole is 1"
• For spur gears with 14.5 degrees & 20 degrees

HHIP 2041-4883 48P #8 14.5 Degree Gear Cutter

• Cutter diameter is 1-3/4"; Arbor hole is 7/8"
• For spur gears with 14.5 degrees & 20 degrees

WEKOW 1pcs Module 1.25 PA20#1-8 HSS Bore 22mm Involute Gear Milling Cutter (#5)

• M1.25 HSS gear milling cutter.
• Specialty cutting tools designed for milling gears.

20° Gear Cutter, 8Pcs Gear Cutter, High Speed Steel Cutting Tool Industrial Supplies M1.5 20 5mm 6mm for Milling Gears, Square Nose End Mills

• There are a total of 8 sets of gear cutting tools to suit different numbers of teeth.
• This gear milling cutter is a special cutting tool specially designed for milling gears. Can be used with peace of mind

1pcs 100 * 0.5 * 40Z HSS Battery Special for Plate Cutting Gear Cutters

• Outside Dia: 100mm
• Inner Bore: 25mm

sourcing map 63Pcs Plastic Gear Package Kit DIY Gear Assortment Accessories Set for Motor Robot Various Gear Axle Belt Bushings

• The Gear Package included: spindle, single/double crown gear, pulley, rack, bevel gear, copper gear, bushings, axles, tires, rubber bands and so on, more accessories that you need for diy robots/motors.
• Multi-uses, you can use it to fix the broken part,Great for diy science and small production, product design and mechanical model.

8PCS Involute Gear Milling Cutter Set, Milling Cutter Gear Cutting Tools, Inside Bore Diameter 22mm Gear Cutting

• Superior material: It is made of high-speed steel material, with high hardness, rust-proof and not easy to oxidize, strong and durable, and long service life.
• Special tools: Gear milling cutters are specially designed for tooth milling. Milling cutters can adapt to different numbers of teeth, basically meeting your needs.

8Pcs Involute Gear Cutters Set, High Speed Steel Cutting Tools, 14.5 Pressure Angle, Milling Machine High Speed Steel Disk-Shaped (14.5° 55mm 22mm)

• Material: Using high speed steel materials, strong and durable, has a long service life
• Specification: The outer diameter is 55mm, the inner diameter is 22mm and the pressure angle is 14.5°

Involute Gear Milling Cutter High Speed Steel Fine Punching, Milling Cutter Gear Cutting Tools with Large Cut out Design

• High Hardness: High temperature quenching heat treatment strengthens the overall hardness, making it more comfortable to use.
• Smooth Installation: The milling cutter is integrally formed without burrs, has smooth surfaces, smooth installation and easy installation.

2Pcs Milling Cutter, Tungsten Steel 4 Flutes CNC Router Bits Woodworking Cutting Tools 4 x 75 x 4T

• Excellent Performance: The flat-bottom milling cutter adopts ultra-fine grained cemented carbide material, which has good milling and cutting performance.
• Efficient: The cutting edge is sharping and the surface is free of burrs, the ultra‑fine cemented carbide material can ensure its engraving and milling performance.

HHIP 2041-2051 20P #5 14.5 Degree Gear Cutter

• Cutter diameter is 2-3/8"; Arbor hole is 1"
• For spur gears with 14.5 degrees & 20 degrees

HHIP 2041-4883 48P #8 14.5 Degree Gear Cutter

• Cutter diameter is 1-3/4"; Arbor hole is 7/8"
• For spur gears with 14.5 degrees & 20 degrees

WEKOW 1pcs Module 1.25 PA20#1-8 HSS Bore 22mm Involute Gear Milling Cutter (#5)

• M1.25 HSS gear milling cutter.
• Specialty cutting tools designed for milling gears.

Accusize Industrial Tools H.S.S. Corner Rounding End Mill Set Size from 1/16 inch to 3/8 inch, 8 pc, 1011-0008

• Intended for use in milling rounded corners
• Form-relieved type; can be sharpened repeatedly without changing the form.

sourcingmap HSS-AL Corner Rounding End Mill Cutter 2 Flute with 2mm Radius, 10mm Shank

• Use in milling rounded corners
• Formed radius cutter. Right hand cut

Milling Router Bit Set, 4pcs M6 /M8 /M10 /M12 High Strength Wear Resistance 4 Flutes HSS Roughing End Mill CNC Router Bit Cutting Tool for Industrial Milling Machine Accessories

sourcingmap 5mm Radius 80mm Long 4 Flutes Straight Shank Corner Rounding End Mill

• Weight: 130g; Material: HSS-AL; Package Content: 1 x Corner Rounding End Mill, 1 x Plastic Case
• Product Name: Corner Rounding End Mill; Shank Diameter: 16mm/0.6"

NITVIA 1pc Corner Rounding End Mill R Angle HSS Radius Milling Cutter R1 - R12.5 Milling Tool R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R12 (Size : R6)

• Corner Rounding End Mill R Angle HSS Radius Milling Cutter R1 t-R12.5 Milling Tool R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R12
• 1. Material: Aluminum containing high speed steel

Carbide End Mill, Face End Mill Set MT3-FMB22 Holder Extension 400R-50-22 Face End Mill Cutter 10pcs APMT1604 CNC Carbide, Corner Rounding End Mills

Aluminum Alloy T Track Intersection Parts Easy to Use, Compact and Portable for Carpentry Work (Silver)

• [Smooth ]: Ensure smooth and labor-saving sliding duringtrack installation.
• [Easy to Use]: Simple assembly for quicktrack formation.

HHIP 5800-4060 3/16" x 1/2" HSS Corner Rounding End Mill

• Intended for use in milling rounded corners, etc
• Form-relieved type; can be sharpened many times without changing the form

4mm to 12mm HSS CNC Straight Shank 4 Flute End Mill Cutter Drill Bit with High Toughness for Copper, Aluminum, Tool Steel, Cast Iron, Suitable for CNC Data Processing Center

• [Improved machine performance] By reducing the number of tool changes and improving machine actuator movement rhythm, this mill cutter enhances machine performance and saves time.
• [Precise and efficient] With its 4-flute design, this end mill cutter ensures precise and efficient cutting, reducing the number of tool changes and saving mold-making time.

Verakee Yuhong-end mills Corner Rounding End Mill HSS Radius Milling Cutter CNC Router Bit, Industrial Grade (Cutting Edge Length : R4.0)

• Type: Corner Rounding End Mill
• Material: High Speed Steel

Axminster Evolution Series Wide Bush for CBN Wheel - 5/8" Bore (Pair)

Axminster Evolution Series Bush for CBN Wheels - 18mm Bore (Pair)

HHIP 3900-3922 Z Type Tool Holder Bushing, 1-1/2" OD x 1" ID

• O.D. is 1-1/2" I.D. is 1
• Slot Length is 2-7/8" Length under the head is 3-1/4"

GADULU 4WD Metal Chassis 144001-1295 6X5.2 Flange Bushing with Metal Chassis 144001-1295 6X5.2 Flange Bushing

• Upgrade Parts/Accessories: Flange bushing
• RC Parts & Accs: Flange bushing

BOLIS CARLO 1072/EM.DIS Support for Female Motor Engine Mount, Galvanised

• Support for roller shutter motorization
• Female with fixing bushing

Morris Products 21706 EMT Insulating Bushing, 2-1/2" Trade Size

• Electrical EMT Insulating Bushings - EMT Insulating Bushing protect wires and cables.
• EMT Insulating Bushings protect cables from abrasion

Connecting Rod Bushing, Wear-resistant Brass Connecting Bushing Integrated for Garden Machine

• BRASS MATERIAL: The connecting rod bushing is made of brass material, which is more wear resistant and durable, with good load bearing and long service life.
• INTEGRATED STRUCTURE: The connecting rod bushing is a one piece molding, no extra process, comparable to the original parts.

Connecting Rod Bushing Brass Integrated Linkage Bushing Replacement for Single Cylinder Air Cooled Generator

• HOW TO USE: Install this connecting rod bushing on the machine and simple to use.
• SUITABLE FOR: This connecting rod bushing is suitable for single cylinder air cooled generators 186F, 188F, 192F brass bushings.

Connecting Rod Bushing, Brass Integrated Linkage Bushing, for Single Cylinder Air Cooled Generators

• APPLICABLE MODELS: Connecting Rod Bushing are suitable for single cylinder air cooled generators 186F, 188F, 192F brass bushings, microtiller, garden machine connecting rod bushings
• EASY INSTALLATION: Connecting Rod Bushing are compact, precise in size, fit your equipment perfectly and are easy to install

Shaft Adapter 5/8" to 3/4" inch Pulley Bore Reducer Sleeve Bushing Sheave & Key auto for 5/8 to 3/4 shaft bushing

• Compatibility: This steel shaft sleeve adapts a crankshaft from 58 inch to 34 inch diameter, it comes with 316 inch keystock. You can pass Alters motors with a different diameter shaft and alters pulleys for a different Speed ​​or belt. Can be widely used to meet your many needs, is your ideal accessory.
• Reduces the buying ：Reduces the necessity of buying a new motor or pulley to maintain existing components and speedpower requirements.