1 in 8 out with Hassle-free Automatic Switch: This 8-port HDMI switch is a perfect solution for you to share HDMI display or projector with HDMI source devices. This switch ensures effortless operation with automatic switching that detects and selects a newly connected device. The splitter allows a single HDMI device to be separated and easily connected to 8 HDMI compatible monitors or projectors. A HDMI 2.0 input signal is split into 8 HDMI 2.0 receiver devices
3D visual effects and Ultra HD Resolution:The 1x8 HDMI splitter supports full HD, 3D, HDR&4K and uses a single HDMI source to access multiple HDMI receivers. Backward compatible with lower resolution, makes the picture more coherent, fluid and natural. . Hdmi 3d distribution technology is supported, so that your 3D demonstration film source can be displayed on the TV
Using a new generation of low-power digital chip processing, 24 small uninterrupted work, little heat, stability, work.The use of 3D compensation technology, effectively eliminate the fast moving picture jitter and smearing phenomenon. Using DCDI processing technology: a: Can eliminate the ordinary high-definition converter in the video sawtooth twill.
B: Use the "bad edit detection" capability to detect the original stream of movies in various video streams and to reconstruct a more accurate video signal, thus creating an image without dynamic material in a completely vertical resolution. c: Use its TrueLife Enhancement technology to identify the details of the image conversion, such as skin lines, spots or hair. The details of the processing makes the picture look clearer and more vivid. d: Using Motion Adaptive processing technology.
Multiple Format Support: This converter can choose TVI, CVI, AHD, CVBS source device output channel as output format, which can be used in a wider range.
LED Indicator: Professional HD Multimedia Interface video converter, when the converter is turned on, the LED will be red, which is convenient for you to know the working status.
【What is MHL】Mobile High-Definition Link is an audio-visual standard interface for connecting portable consumer electronic devices. MHL has 5 pins, 2 of which are dedicated to audio and video signals, 2 to power and ground and 1 to control. The MHL cable supports uncompressed HD video and digital audio, charging and remote control with just 1 cable, making it easier to store and transfer data.
【5 pin Micro USB Input port】The MHL-enabled Micro USB interface allows mobile phones, digital cameras, digital camcorders and portable media players to transfer full media content directly to the TV without damaging the high resolution of the film. (Requires a 5-pin MHL-enabled device to work properly. If the device is 11-pin, a 5-pin to 11-pin adaptor is required)
The USB 2.0 capture card can simultaneously capture HDMI video and HDMI audio, and can transmit audio and video signals to a computer or smartphone for preview and storage.
When using standard AWG26 cable, the maximum input transmission distance is 15 meters (1080P and below resolution).
Meanwhile, this switch can easily connect the outdoor LED display to the laptop, which can be finished in easy way.
The VGA switch box allows you to share a monitor between two laptops by manually pressing the bottom of the top of the switch, and when you need two laptops to share a monitor, there is no need to loosen and retighten the VGA cable. A simple thing makes
PASSTHROUGH DESIGN – VCE RJ45 pass through connectors are designed with pass-thru hole and transparent cover, you can easily review and check wire sequence before crimping, thus avoiding mis-wiring and succussing even if on your first try.
CAT6 PERFORMANCE - Cat6 RJ45 connectors pass through are backward compatible with Cat5e and Cat5 ethernet connectors. Solid or stranded UTP Cat6 cable with core diameter 0.93 mm-1.04 mm. Suitable for devices with standard RJ45 ends like PC, ADSL, Router, Switch, etc.
PASSTHROUGH DESIGN – VCE RJ45 pass through connectors are designed with pass-thru hole and transparent cover, you can easily review and check wire sequence before crimping, thus avoiding mis-wiring and succussing even if on your first try.
CAT6 PERFORMANCE - Cat6 RJ45 connectors are backward compatible with Cat5e and Cat5 ethernet connectors. Solid or stranded UTP cable with core diameter 0.93 mm-1.04 mm. Suitable for devices with standard RJ45 ends like PC, ADSL, Router, Switch, etc.
CAT 6 RJ45 CONNECTOR terminates unshielded twisted pair cable for making a custom-length Cat 6 Ethernet cable; Supports 24-28 AWG round or flat stranded wire with an outside diameter up to 5.4mm
CRIMP STYLE CAT6 pass-through connectors terminate solid or stranded cable with a three point staggered contact to provide a secure connection; Simply feed the wires through the openings in the pass thru RJ45 connectors and crimp the connector for a faster termination with less effort
CAT6 / CAT5 COMPATIBILTY: AVARTEK RJ45 CAT 6 pass through connectors enables you to customise cable wires to your preferred length. It supports 24-28 AWG Cat6 and Cat6a unshielded twisted pair round or flat stranded cables.
PASS THROUGH DESIGN: The connector features a passthrough design that simplifies termination making sequence verification. Before crimping this allows you to verify the wires effortlessly with its transparent design. The accessories allow the wires to pass all the way through RJ45 plug.
【Stable Transmission】Gold-plated contacts provides reliable performance for a Gigabit Ethernet rated network. Made of pure copper material and 3 prong blade design, ensures that the contacts and the core of the wire are closely combined, The transmission signal is stable and uninterrupted
【Easy to Use】The pass through rj45 connectors allow the core wire to be threaded straight through. The clarity of the plastic makes it easier to see your wires are in place and less likely to make mistakes during installation. Easy to use even if you're not a professional staff
PASSTHROUGH DESIGN - With Pass-thru hole and transparent cover, you can easily review and check wire sequence before crimping, thus avoiding mis-wiring and succussing even if on your first try.
CAT6 PERFORMANCE - Cat6 RJ45 connectors are backward compatible with Cat5e and Cat5 ethernet connectors. Solid or stranded UTP cable with core diameter 0.93 mm-1.04 mm. Suitable for devices with standard RJ45 ends like PC, ADSL, Router, Switch, etc.
CAT6 COMPATIBILTY: RJ45 CAT 6 / CAT 6A shielded pass through connectors enables you to customise cable wires to your preferred length. It supports 24-28 AWG Cat6 and Cat6a unshielded twisted pair round or flat stranded cables.
SHIELDED DESIGN: Our Shielded RJ45 connectors are designed with oxygen-free copper to minimise signal loss and effectively resist interference. With 50μ gold-plated pins, these connectors prevent internal metal oxidation, ensuring a stable transmission network environment. Experience reliable and uninterrupted connectivity with our high-quality Shielded RJ45 connectors.
Supports: installation LAN cable Cat7 Cat6A. Suitable for core wire diameter 1.35-1.45mm (23AWG). Otherwise, this can cause the cable wires in the plug or in the threading aid to not be fixed and moving in it. Attention: this cat6a RJ45 connector is not compatible with Cat8, Cat6, Cat5e and Cat5 cable.
High speed signal transfer rate: This passthrough RJ45 cat7 connectors also supports higher data transfer rates up to 10 Gigabit Ethernet.
Multi-Modular RJ45 Crimp Tool - The Ethernet Crimping Tool is ideal for stripping, cutting, and crimping CAT5 CAT5e, CAT6, CAT6A, CAT7 cable, and RJ11/RJ12 standard, and Pass Through RJ45 connectors with dovetail clip
Crimping Shield Cable Function - This rj45 crimping tool is suitable for both shielded and unshielded modular plugs
Quickly and easily install each connector plug without the need for any special crimp tools for wire ends. Simply mount a CAT 6A cable with 8 conductors on the inside module, close the connector and plug it in wherever you need it.
Suitable for RJ45 interface devices, applied to LAN work area, data communication , integrated wiring and etc.
Supports: installation LAN cable Cat7 Cat6A. Suitable for core wire diameter 1.35-1.45mm (23AWG). Otherwise, this can cause the cable wires in the plug or in the threading aid to not be fixed and moving in it. Attention: this cat6a RJ45 connector is not compatible with Cat8, Cat6, Cat5e and Cat5 cable.
High speed signal transfer rate: This passthrough RJ45 cat7 connectors also supports higher data transfer rates up to 10 Gigabit Ethernet.
PASSTHROUGH DESIGN – VCE RJ45 pass through connectors are designed with pass-thru hole and transparent cover, you can easily review and check wire sequence before crimping, thus avoiding mis-wiring and succussing even if on your first try.
CAT5E PERFORMANCE – Cat5e RJ45 connectors are backward compatible with Cat5 ethernet connectors. Solid or stranded UTP cable with core diameter 0.93 mm-1.04 mm. Suitable for devices with standard RJ45 ends like PC, ADSL, Router, Switch, etc.
【Stable Transmission】Gold-plated contacts provides reliable performance for a Gigabit Ethernet rated network. Made of pure copper material and 3 prong blade design, ensures that the contacts and the core of the wire are closely combined, The transmission signal is stable and uninterrupted
【Easy to Use】The pass through rj45 connectors allow the core wire to be threaded straight through. The clarity of the plastic makes it easier to see your wires are in place and less likely to make mistakes during installation. Easy to use even if you're not a professional staff
PASSTHROUGH DESIGN – VCE RJ45 pass through connectors are designed with pass-thru hole and transparent cover, you can easily review and check wire sequence before crimping, thus avoiding mis-wiring and succussing even if on your first try.
CAT6 PERFORMANCE - Cat6 RJ45 connectors are backward compatible with Cat5e and Cat5 ethernet connectors. Solid or stranded UTP cable with core diameter 0.93 mm-1.04 mm. Suitable for devices with standard RJ45 ends like PC, ADSL, Router, Switch, etc.
Crimping-free & Reusable: The VCELINK Cat6A connectors is designed for fast and easy installation without crimping tools. Nut-type strain relief boot is convenient to install and disassemble.
Wide Compatible: Support 24-22 AWG solid or stranded wire (wire OD:0.58-1.0mm) with an outside diameter not exceeding 8.5mm. PoE PLUS COMPLIANT for IEEE 802.3 at Power over Ethernet (PoE+) applications. IDC modules: T568A or T568B.
Stable performance: our RJ45 connector uses a chip with trigonal structure, which makes the contacts and cores tightly connected to thickened gold-plated connectors that are wear-resistant and oxidation resistant, have strong conductivity and low impedance. The product strengthens the conductivity of the contacts to ensure the stability of data transmission.
Design: dovetail clip design for easy grounding, easy to attach large wire through the network cable. Make the network cable tight and not loose, to ensure stable signal transmission. The Cat 7 connector also supports higher data transfer rates up to 10 Gigabit Ethernet. The product is robust and does not leave any obvious wrinkles even after repeated bending.
The RJ45 connectors work with ethernet cable outer jacket 24AWG~26AWG CAT5 CAT5E CAT6 network cables. Furthermore, it also works on most styles and models of RJ45 crimping tools. (But:If you need make cat6 23awg cable, Pls don't buy this item, buy the another cat6 connector in our store).
The pass-through design make the wires passing all the way through the plug and the wires extend to the front of the RJ45 plug, allows verifing they are in the correct order before crimping the connector with our crimping tool.
Supports: installation LAN cable Cat7 Cat6A. Suitable for core wire diameter 1.35-1.45mm (23AWG). Otherwise, this can cause the cable wires in the plug or in the threading aid to not be fixed and moving in it. Attention: this cat6a RJ45 connector is not compatible with Cat8, Cat6, Cat5e and Cat5 cable.
High speed signal transfer rate: This passthrough RJ45 cat7 connectors also supports higher data transfer rates up to 10 Gigabit Ethernet.
Optimal Performance - Shielded clear connectors reduce the distance between wire twists and contacts. They ensure a solid connection for the finest performance that inhibits frequency noise.
Easily Identify Wiring Order - The pass-through function allows the wires to pass all the way through the plug to let you verify they are in the correct order before crimping the plug.
【Stable Transmission】Gold-plated contacts provides reliable performance for a Gigabit Ethernet rated network. Made of pure copper material and 3 prong blade design, ensures that the contacts and the core of the wire are closely combined, The transmission signal is stable and uninterrupted
【Easy to Use】The pass through rj45 connectors allow the core wire to be threaded straight through. The clarity of the plastic makes it easier to see your wires are in place and less likely to make mistakes during installation. Easy to use even if you're not a professional staff
Applicability: This crimping tool RJ45 is widely compatible with 8P8C, 6P6C and 6P4C modular plug; which can be crimped both pass-through male and non-pass-through connectorsuitable for all CAT5, CAT5E, CAT6, CAT6A, CAT7, connectors.
Ergonomic design: The crimping process is labor-saving and fast, reduces fatigue, can be used for a long time, and can be operated with one hand.
Easy to install: Cat7 RJ45 Connector pass-thru design allows the core wire to be threaded straight through which makes it easier to check for proper wire position for easy installation, suitable for a professional installer to save operating time, and easy for novices to use but requires a correct crimper
High compatibility: The cat7 RJ45 Plug can be used to repair CAT7 CAT6a shielded solid and stranded Thick network cables and indoor cables, it can support 23 AWG-26 AWG round or flat stranded wire.The insulated conductor outside diameter needs to be less than or equal to 1.45mm
Full-metal Structure--The whole body of the RJ45 ends is made of zinc alloy, which can effectively shield external interference to network signals. Phosphor bronze gold-plated contacts transmit signals quickly and stably, and are resistant to corrosion and plugging. This makes the rj45 connector have a good transmission quality and long service life.
Application--The shielded RJ45 termination plug is suitable for 22 AWG-23AWG network cables (Wire OD should be 1.04mm-1.35mm). Network speeds up to 10 Gbps 600MHz, support PoE, PoE+, POE++.
PASSTHROUGH DESIGN – RJ45 pass-through connectors are designed for ease of use. They come with a transparent cover and a pass-thru hole through which you can conveniently review your wire sequence before crimping. This ensures that your network connection is always perfect
NOTA - CAT6 RJ45 connectors offer exceptional performance for Cat6 connections, as well as being compatible with Cat5e and Cat5 ethernet cables. They are suitable for use with solid or stranded UTP cables that have a core diameter between 0.93 mm-1.04 mm, making them adaptable to various devices, including PCs, ADSL, routers, and switches
‼【Please note】Only Kinoth store sell 📌Pass Through RJ45 Connectors📌. Easy Pass Through RJ45 Ends design allows you to insert the wire through the connector and out the front. More saving time than the normal connectors
✅3 Prong Pins 8P8C Gold Plated Connectors provide fast transmission and resist corrosion