Kuman
1-1 of 40 results

KUMK Portable Monitor 4K, 15.6" UHD 3840x2160 IPS Screen Gaming Monitor, Laptop USB-C Monitor with HDMI/Type-C, for PC, Mac, Laptop, Phone, PS3PS4PS5, Xbox, Switch, Raspberry Pi, VESA Installable

• [4K HDR Monitor For Gaming] KUMK 4K portable monitor with FreeSync and HDR technology and a high refresh rate of 60Hz, delivers 4K Ultra HD (3840 x 2160) picture quality. Adopts IPS screen, 1000:1 contrast ratio, 300cd/㎡, 178° viewing angle gives super color contrast. Low Blue light eye care tech in the gaming monitor reduces eye strain.
• [Universal Compatibility] With the Mini HDMI port, 2x Full-Featured USB-C ports, this mobile monitor is compatible with Switch, Xbox, PS4, MacBook Pro, or Laptop/PC, phone, and tablet. 2 USB-C cables and 1 HDMI cable are included. Perfect choice for business presentations, games, videos, TV series, photos, advertising, monitoring, etc.

kuman 3.5 Inch Touch Screen TFT Monitor LCD Dsiplay with Protective Case 320x480 Resolution TFT LCD Display for Raspberry Pi 3B+,3B,2B,B+ SC107

Kuman Professional CNC Kit for arduino, GRBL CNC Shield +UNO R3 Board + RAMPS 1.4 Mechanical Switch Endstop + DRV8825 A4988 GRBL Stepper Motor Driver with Heat Sink + Nema 17 Stepper Motor (Black)

• Latest CH340G CNC Shield expansion board Version 3.0 for Arduino
• Kuman UNO R3 Board, MCU: ATmega328, USB interface: ATmega16U2 with 1.5m USB Cable

Kuman 0.96 Inch Yellow Blue IIC OLED Moudle I2c IIC Serial 128x64 LCD Display for Arduino Raspberry pi KY34-BY

Kuman 0.96 Inch White IIC OLED Moudle I2c IIC Serial 128x64 LCD Display for Arduino Raspberry pi KY34-W

Longruner Professional 3D Printer CNC Kit for Arduino GRBL CNC Shield + RAMPS 1.4 Mechanical Switch Endstop + DRV8825 A4988 GRBL Stepper Motor Driver + Nema 17 Stepper Motor (LKB02)

• ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
• ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.

kuman Stepper Motor Compatible with ArduinoIDE 5 sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board + Dupont Wire 40pin Male to Female Breadboard Jumper Wires Ribbon Cables K67

• 5pcs Stepper motor and driver board compatible with ArduinoIDE R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi
• Including 1x 40-pin male to female jumper wires，Each cable length: about 20cm /8-inch.

ELEGOO 3.5 Inch TFT LCD 480x320 Screen For Raspberry Pi 3 2 3.5 Inch 480x320 TFT Touch Screen Monitor for Raspberry Pi Model B B+ A+ A Module SPI Interface with Touch Pen SC06

• 100% compatiable with Raspberry Pi 3 2 Model B B+ A+ A, an ideal alternative solution for HDMI monitor.
• 480x320 resolution for sharper display.

Ingcool 7 inch HDMI LCD 1024x600 Resolution Capacitive Touch Screen IPS Display Module Compatible with Raspberry Pi 4 3 2 1 B B+ A+, PC, Supports Windows 10/8.1/8 / 7

• 1024x600 hardware resolution 7'' IPS screen
• Supports mini PC like Raspberry Pi 4B / 3B+ / 3A+ / 3B / 2B / 1B+ / 1A+,Additional HDMI Cable Required: Raspberry Pi Zero WH / Zero W / Zero

2.4G NRF24L01+PA+LNA SMA Antenna Wireless Transceiver Communication Module

• This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost!! It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system.
• This nRF24L01+ module is designed with Power amplifier and SMA antenna This allowed you to use the wireless communication up to 1000 meters! (No barrier)

ELECROW For Raspberry Pi Screen, 5-inch Touch Screen Monitor 800x480 TFT LCD Mini Monitor Competible with Raspberry Pi 4 3B+ 3B 2B+ BB Black Banana Pi Windows 10 8 7 Jetson Nano

• 5 inch touch screen monitor with 800*480 mini LCD screen, high resolution picture, large viewing angle, fast response time, full color display. It supports manual backlight control, backlight switch can be turn off to lower power consumption.
• For Raspberry Pi screen comes with a touch pen for easy use. When working with Raspberry Pi 4 3B+ 3 2B+, Raspberry Pi zero, directly plugged, I/Os for touch function and power supply, HD interface for displaying.

Kuman Professional CNC Kit for arduino, GRBL CNC Shield +UNO R3 Board + RAMPS 1.4 Mechanical Switch Endstop + DRV8825 A4988 GRBL Stepper Motor Driver with Heat Sink + Nema 17 Stepper Motor (Black)

• Latest CH340G CNC Shield expansion board Version 3.0 for Arduino
• Kuman UNO R3 Board, MCU: ATmega328, USB interface: ATmega16U2 with 1.5m USB Cable

Kuman 0.96 Inch Yellow Blue IIC OLED Moudle I2c IIC Serial 128x64 LCD Display for Arduino Raspberry pi KY34-BY

Kuman 0.96 Inch White IIC OLED Moudle I2c IIC Serial 128x64 LCD Display for Arduino Raspberry pi KY34-W

Longruner Professional 3D Printer CNC Kit for Arduino GRBL CNC Shield + RAMPS 1.4 Mechanical Switch Endstop + DRV8825 A4988 GRBL Stepper Motor Driver + Nema 17 Stepper Motor (LKB02)

• ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
• ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.

kuman Stepper Motor Compatible with ArduinoIDE 5 sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board + Dupont Wire 40pin Male to Female Breadboard Jumper Wires Ribbon Cables K67

• 5pcs Stepper motor and driver board compatible with ArduinoIDE R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi
• Including 1x 40-pin male to female jumper wires，Each cable length: about 20cm /8-inch.

ELEGOO 3.5 Inch TFT LCD 480x320 Screen For Raspberry Pi 3 2 3.5 Inch 480x320 TFT Touch Screen Monitor for Raspberry Pi Model B B+ A+ A Module SPI Interface with Touch Pen SC06

• 100% compatiable with Raspberry Pi 3 2 Model B B+ A+ A, an ideal alternative solution for HDMI monitor.
• 480x320 resolution for sharper display.

Ingcool 7 inch HDMI LCD 1024x600 Resolution Capacitive Touch Screen IPS Display Module Compatible with Raspberry Pi 4 3 2 1 B B+ A+, PC, Supports Windows 10/8.1/8 / 7

• 1024x600 hardware resolution 7'' IPS screen
• Supports mini PC like Raspberry Pi 4B / 3B+ / 3A+ / 3B / 2B / 1B+ / 1A+,Additional HDMI Cable Required: Raspberry Pi Zero WH / Zero W / Zero

2.4G NRF24L01+PA+LNA SMA Antenna Wireless Transceiver Communication Module

• This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost!! It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system.
• This nRF24L01+ module is designed with Power amplifier and SMA antenna This allowed you to use the wireless communication up to 1000 meters! (No barrier)

ELECROW For Raspberry Pi Screen, 5-inch Touch Screen Monitor 800x480 TFT LCD Mini Monitor Competible with Raspberry Pi 4 3B+ 3B 2B+ BB Black Banana Pi Windows 10 8 7 Jetson Nano

• 5 inch touch screen monitor with 800*480 mini LCD screen, high resolution picture, large viewing angle, fast response time, full color display. It supports manual backlight control, backlight switch can be turn off to lower power consumption.
• For Raspberry Pi screen comes with a touch pen for easy use. When working with Raspberry Pi 4 3B+ 3 2B+, Raspberry Pi zero, directly plugged, I/Os for touch function and power supply, HD interface for displaying.

Kuman Professional CNC Kit for arduino, GRBL CNC Shield +UNO R3 Board + RAMPS 1.4 Mechanical Switch Endstop + DRV8825 A4988 GRBL Stepper Motor Driver with Heat Sink + Nema 17 Stepper Motor (Black)

• Latest CH340G CNC Shield expansion board Version 3.0 for Arduino
• Kuman UNO R3 Board, MCU: ATmega328, USB interface: ATmega16U2 with 1.5m USB Cable

Kuman 0.96 Inch Yellow Blue IIC OLED Moudle I2c IIC Serial 128x64 LCD Display for Arduino Raspberry pi KY34-BY

Kuman 0.96 Inch White IIC OLED Moudle I2c IIC Serial 128x64 LCD Display for Arduino Raspberry pi KY34-W

Longruner Professional 3D Printer CNC Kit for Arduino GRBL CNC Shield + RAMPS 1.4 Mechanical Switch Endstop + DRV8825 A4988 GRBL Stepper Motor Driver + Nema 17 Stepper Motor (LKB02)

• ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
• ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.

kuman Stepper Motor Compatible with ArduinoIDE 5 sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board + Dupont Wire 40pin Male to Female Breadboard Jumper Wires Ribbon Cables K67

• 5pcs Stepper motor and driver board compatible with ArduinoIDE R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi
• Including 1x 40-pin male to female jumper wires，Each cable length: about 20cm /8-inch.

ELEGOO 3.5 Inch TFT LCD 480x320 Screen For Raspberry Pi 3 2 3.5 Inch 480x320 TFT Touch Screen Monitor for Raspberry Pi Model B B+ A+ A Module SPI Interface with Touch Pen SC06

• 100% compatiable with Raspberry Pi 3 2 Model B B+ A+ A, an ideal alternative solution for HDMI monitor.
• 480x320 resolution for sharper display.

Ingcool 7 inch HDMI LCD 1024x600 Resolution Capacitive Touch Screen IPS Display Module Compatible with Raspberry Pi 4 3 2 1 B B+ A+, PC, Supports Windows 10/8.1/8 / 7

• 1024x600 hardware resolution 7'' IPS screen
• Supports mini PC like Raspberry Pi 4B / 3B+ / 3A+ / 3B / 2B / 1B+ / 1A+,Additional HDMI Cable Required: Raspberry Pi Zero WH / Zero W / Zero

2.4G NRF24L01+PA+LNA SMA Antenna Wireless Transceiver Communication Module

• This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost!! It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system.
• This nRF24L01+ module is designed with Power amplifier and SMA antenna This allowed you to use the wireless communication up to 1000 meters! (No barrier)

ELECROW For Raspberry Pi Screen, 5-inch Touch Screen Monitor 800x480 TFT LCD Mini Monitor Competible with Raspberry Pi 4 3B+ 3B 2B+ BB Black Banana Pi Windows 10 8 7 Jetson Nano

• 5 inch touch screen monitor with 800*480 mini LCD screen, high resolution picture, large viewing angle, fast response time, full color display. It supports manual backlight control, backlight switch can be turn off to lower power consumption.
• For Raspberry Pi screen comes with a touch pen for easy use. When working with Raspberry Pi 4 3B+ 3 2B+, Raspberry Pi zero, directly plugged, I/Os for touch function and power supply, HD interface for displaying.