La Cure
1-10 of 400 results
J-b Weld
Simply 50139 J-B Weld PlasticBonder- Black,25 ml
£7.70 (£308.00 / l)- GAP FILLER - Ideal gap filler for plastics and composites.
- PLASTIC TO PLASTIC BONDING - Great for plastic bonding where other epoxies may struggle to adhere.
J-b Weld
JB Weld TRA50133-TEX Plastic Bonder Syringe, Tan, Pack Of 1
£7.33 (£293.20 / l)- GAP FILLER - Ideal gap filler for plastics and composites
- PLASTIC TO PLASTIC BONDING - Great for plastic bonding where other epoxies may struggle to adhere
J-b Weld
J-B Weld 8271 Kwikweld Professional Quick Setting Steel Reinforced 2 Part Epoxy adhesive for Repair, Dark Grey, Two 5 oz tubes
£17.10 (£115.70 / l)- PROFESSIONAL SIZE - Ideal for high use professionals such as the automotive industry
- FAST SETTING - Sets within minutes and cures within just a couple of hours
Longfair Chemiclas
Epoxy Resin 10.2 kg Fibreglass Kit | Professional Quality Clear & Odourless Lamination and Resin with Hardener and Gloves, incl. English Instructions…
£87.99- Top quality: high-quality – Liquid resin for crystal clear, transparent and Luftblasenfreie Gießerge Bnisse
- Versatile application: model building, boats, form-fitting construction, Laminieren, exterior joinery, coated floors, pond construction, terrarium, etc.
West System
WEST SYSTEM® A Pack 105/205
£56.00- This convenient epoxy bundle contains one can of WEST SYSTEM 105 Epoxy Resin (1kg), and WEST SYSTEM 205 Fast Hardener (0.2kg). Use in a majority of bonding situations, produces a rapid epoxy cure that develops physical properties quickly at room temperature.
- WEST SYSTEM 105 Epoxy Resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended with 205 Fast Hardener at a 5:1 ratio, it cures to a hard, solid plastic with superior physical properties. It will wet out and bond with wood fibre, fibreglass, reinforcing fabrics and a variety of metals. (205 Fast Hardener is not intended for clear coating.)
West System
WEST SYSTEM Pump Set 5:1 Ratio (301-5A)
£21.99- These pumps are specially designed for convenience and accuracy when dispensing WEST SYSTEM 105 Epoxy Resin and WEST SYSTEM hardeners.
- The pumps slot directly on the resin and hardener containers and have been pre-calibrated to deliver an accurate working ratio upon use.
Uhu
UHU 3-45592 Plus Final Strength, Crystal Clear and Highly Durable 2-Component Adhesive in a Practical Double Chamber Syringe for one Application in The Correct Mixing Ratio, 25 g
£9.50 (£395.83 / l)- Two-component adhesive in a practical double-chamber syringe for easy dispensing of the two adhesive components in the correct mixing ratio
- Processing time (pot life) up to 90 minutes, functional strength after 12 hours, at room temperature after 24 hours final strength (final strength approx. up to 170 kg/cm²)
Araldite
ARALDITE® ARA-400005 Araldite Rapid 2-Part Epoxy Adhesive Glue Tubes Opaque 2 x 15ml
£6.56 (£218.67 / l)- All materials, Long lasting, fast setting (sets in 5 minutes). For use indoors or out.
- A strong, long lasting solvent-free adhesive which is water resistant.
Quiksteel
QuikSteel 17502 Plastic Repair Epoxy Paste, 2 Oz
£7.55 (£132.92 / kg)- Quiksteel plastic epoxy paste
- 260C (500F) temperature resistant
Mg Chemicals
MG Chemicals 8329TFS Thermally Conductive Adhesive, Slow Cure, 25 mL Dual Dispenser
£35.58 (£1,423.20 / l)- Thermal conductivity: 1.22 W/(make)
- Working life of 4 hours
Doumii
FEP Film for LCD 3D Resin Printer – FEP Release Film Fit for Elegoo Mars/Anycubic Photon/Creality LD002R/LONGER Orange, 7.87x5.51x0.006 inch, 3Pcs
£16.30- Attention – There are two protective films on both sides of the FEP sheet, make sure they are removed before installing.
- Compatibility – Fit for most LCD 3D resin printers with screen from 5.5'' to 6.08'', such as Elegoo Mars/Anycubic Photon/ Creality LD002R/LONGER Orange, etc..
Doumii
3D Printer Resin Filter Disposable – with Cone Silicone Resin Funnel(Large), Paint Strainer or Resin Strainer kit for uncured Resin Recycling (101)
£15.35- The Resin or Paint Filter Kit include 100pcs of Disposable Paper Strainer with 1pcs Silicone Resin Funnel(Large).
- The Resin Strainer is easily used for pouring uncured resin back into bottle, save your money, eco-friendly.
Doumii
3D-Printer Resin Stainless-Steel Funnel Filter – with Detachable Resin Strainer, for Recycling or transferring uncured 3D-Printing Liquid，DOUMII
£17.39- The Resin funnel kit includes 1pcs stainless funnel with 2pcs detachable strainer and 1pcs brush for cleaning easily.
- The Resin stainless filter is easily used for pouring uncured resin back into bottle, save your money, and also, easy to clean, being eco-friendly.
Doumii
3D Printer Resin Filter Disposable – with Cone Silicone Resin Funnel(Large), Paint Strainer or Resin Strainer kit for uncured Resin Recycling (201)
£24.25- The Resin or Paint Filter Kit include 200pcs of Disposable Paper Strainer with 1pcs Silicone Resin Funnel(Large).
- The Resin Strainer is easily used for pouring uncured resin back into bottle, save your money, eco-friendly.
Doumii
DOUMII Water Washable 3D Resin – 405nm UV Cured 3D Printing Resin, for LCD 3D Printers, Easy to Clean and Cure, Fast Curing with High Precision. (Green, 1000g)
£52.06- Water Washable – Doumii 3D Resin could be washed easily by water instead of 95% ethyl alcohol，save your money, save your time.
- Excellent Fluidity – The formula of Doumii 3D printing resin has been optimized for Low Viscosity which could shorten curing time and being easy for cleaning the vat and the miniature.
