Limit
1-10 of 400 results
Fydun
Fydun 2Pcs Incubator Ntrol System Limit Switch Replacement Farm Hatching Equipment Accessories 220V
£5.87- Incubator ntrol system limit switch replacement accessories with .
- Practical accessory for ntrolling equipment ntrol system, suitable for farm use.
Lyrlody
Analogue Water Sensor with High Accuracy, G3/8 Screw Connection, IP65 Protection Class, Stainless Steel Housing, CeramicWhite withProtection (0~10BAR)
£11.82- 【100% BRAND NEW AND 】 - Made of stainless steel and equipped with an advanced ceramicand a customized process chip for high accuracy.
- 【SMALL AND LIGHTWEIGHT】 - The small and lightweight sensor is easy to install and use.
Fafeicy
2 in 4 Out Signal Isolator, Direct Current Signal Conditioner Transmitter PLC Detection with Photoelectric Isolation (0-10V)
£12.25- SAFE MATERIAL: The signal isolator is made of flame retardant material, with paint spraying, which can protect the circuit from environmental corrosion.
- STABLE ISOLATION: With photoelectric isolation, anti high frequency interference, realize mutual isolation of input and output, protect power equipment.
Jectse
AC Current Transmitter 4 20mA Output, Phase Perforated PLC Control for Industrial Automation with High Accuracy, Easy Installation
£18.61- [WORKING PRINCIPLE] Real measurement and isolation of AC current in grid or circuit Transform into 4‑20mA DC output signal
- [WIDELY USED] Connect with AD for centralized acquisition Output to PLC or analog/ indicating instrument Suitable for industrial automation
Jerys
Water Level Sensor, Water Level Detector Stainless Steel High‑ for Water Medium for Monitoring Of Water Level (#5)
£22.70- The measured medium is water, do not test liquids that will corrode stainless steel.
- Full digital conditioning circuit, 4‑20mA signal output ensure more stable performance.
Spacnana
Pressure Transducer, 0 to 0.6Mpa Waterproof Compact Pressure Transmitter Electronic Pressure Sensors
£18.57- [FOR LONG DISTANCE] The current output is 4‑20mA, can be used for long distance transmission with wide range of applications.
- [Wide Range of Applications] This pressure transmitter can be used in process control, aviation, aerospace, automotive, health care equipment, HVAC and other fields.
Chiciris
DC Signal Isolator, Current Signal Conditioner Photoelectric Isolation 4-20mA Input Quick Response 2 in 4 Out for Circuit Protection (0-10V)
£12.24- HIGH EFFICIENCY: Using single chip microcomputer chip, with lower power, higher withstand voltage, PCB transformer, fast transmission response.
- SPECIFICATIONS: The DC signal isolator is designed with 2 in 4 out, the power supply is 24V, the input signal is 4‑20mA, efficient and stable in operation.
Seafront
Throw in Type Liquid Level Transmitter 0-3 Meter Measurement Range Stainless Steel Water Level Transducer with 6m / 19.7ft Cable
£33.44- ACCURATE DETECTION: Liquid level transmitter and high accuracy silicon diffusion can more accurately monitor water level.
- STABLE DETECTION: Full digital conditioning circuit, 4 to 20mA signal output, ensuring more stable performance. IP68 multi layer waterproof protection, safe to use, and long service life.
Seafront
0-3M Liquid Level Transmitter Throw in Type Stainless Steel Water Level Sensor Detector with 6m Cable for Water Gas Oil
£33.66- STABLE DETECTION: Full digital conditioning circuit, 4 to 20mA signal output, ensuring more stable performance. IP68 multi layer waterproof protection, safe to use, and long service life.
- STAINLESS STEEL MATERIAL: The shell is made of 304 stainless steel, which is durable and equipped with waterproof cables, ensuring safe use. The liquid level sensor has a wire length of 6 meters and is suitable for detecting water levels within the range of 0 to 3 meters.
Seafront
4‑20mA Liquid Level Transmitter High Accuracy Stainless Steel Water Level Sensor Detector with Cable 24V DC (0‑6meter Range)
£33.86- DURABLE AND NON CLOGGING: Liquid level transmitter adopt corrosion resistant material, excellent corrosion resistant performance, excellent solid structure, prevent bending, with high accuracy, high stability, prevent clogging hole design, easy to clean
- WITH CABLE: The housing of the water level sensor probe is made of 304 stainless steel with waterproof cable for healthy use and suitable for water level detection
Minifinker
Toothed Gear, Toothed Wheel Metal Compact Black High Hardness for Incubator
£5.79- Applicable for all kinds of large incubators, can meet your demands.
- Made of high quality metal, hard and durable, has long service life.
01 02 015
01 02 015 Egg Tester - Cold Light - Heavy Duty - 9 Lamps - Egg Candle Tester - Multipurpose with Lanyard for Geese
£5.76- PRACTICAL: You can see the appearance of the fertilized egg at any time, and the egg light device is very helpful for observing the growth of the fertilized egg.
- EASY TO OPERATE: To check whether the egg hatching is normal, just place the larger end of the egg on the lamp holder, and turn on the LED light to observe.
Oreilet
Oreilet Temperature Controller, Poultry Farming Supplies Incubator Controller, for Artificial Climate Rooms Poultry & Eggs Incubators Storage
£2.72- High‑accuracy temperature and humidity controller to control the temperature and humidity of the incubator.
- The intelligent temperature and humidity controller has a large LCD screen, which is easy to read and operate.
Fdit
2Pcs Incubator Control System Limit Switch Replacement Incubator Parts Farm Hatching Equipment Farm Accessories 220V
£7.20- Adopting plastic and metal material, which is durable and ensures long service life.
- Fixed by screw, which is more stable and safer, not easy to be broken or worn.
Ymiko
Ymiko Incubator Heater Tube Heating Element(300W)
£11.25- The heating element replacement accessory of the incubator.
- A great tool for improving incubator performance.
Psc
PSC CHWS149 Chws100 Epoxy Coated Steel Wire Shelf for Incubator CH-100G Or R Series, 0.67" Height, 13.78" Wide, 12.4" Length
£13.13- Incubator shelf for: ch100g120, ch100g230, ch100ge120, ch100ge230
- Durable epoxy coated steel construction
R+co
R-Com 2500107 Plastic Hatching Mat Set (Pack of 5)
£15.32- Used with Rcom Mini digital incubator only
- Set of 2 of each 3-egg and 7-egg hatching mats
Qinlorgo
Protein Separator Quick Separation Irregular Top Egg Liquid Filter for Kitchen
£8.43- Ceramic Material: This egg white separator is made of high quality ceramic, which is cleaner, healthier and safer than ordinary plastic separators.
- Large Capacity: Although this egg white separator looks small, it actually has a large capacity for a small belly, and the container can divide two eggs at a time.
Freshsell
Heating Incubator Heater Element Plate for Egg Incubator Accessories 110V 220V
£6.48- ❤ 100% brand new and high quality
- ❤ Features:Simply remove the damaged heating element and replace with new one.Can also be used for DIY incubatorsApplication: Heating element replacement part for incubator, brooder, etcHeating plate only, other accessories demo in the picture is not included!
Niiyen
Incubator Heater Element, Incubator Heater Circular Heating Element Incubator Accessories, Heating Element Replacement Part for Incubator, Incubator Tools(200W)
£10.49- ✔HIGH QUALITY INCUBATOR HEATING PARTS: Heating element replacement part for incubator.
- ✔EASY TO DISASSEMBLE AND ASSEMBLE: Simply remove the damaged heating element and replace with new one.
Aonelas
4-Pack Silent T8 Lead Screw POM nut 8mm Lead Tr8x8 Acme Thread Screw Nuts Replacing Brass nut for 3D Printer Z Axis, CNC (2mm Pitch 8mm Lead)
£7.49- Lead means Nut turn one circle,How far the screw forwards
- POM material is durable and silent Plastic material, very good material for lead screw nut
Cncmans
CNCMANS 50PCS Nylon Plastic C5 Guide Rail Dust Cover Protector Green Caps Protector + 40PCS M5x22mm Socket Cap Screws for HGR20 Linear Rail Guide HGH20 HSR20 HGW20 EGH20 EGW20
£13.45- Package Including- About 50pcs C5 Plastic Dust Cover Green Caps Protector; 40pcs M5 x 22mm socket head screws.
- Plastic Cap Dust Pad- The dust cap is pressed on the hole of the linear rail to avoid the dust to enter, protect the linear rail and make linear motion smooth, low friction.
Fudeshe
Fudeshe 2PCS Lead Screw Brass Nut, T8 Lead Screw,Anti Backlash Spring Loaded Nut Elimination Gap,Threaded Rod Lead Screws for 3D Printer
£4.49- Package Content: 2pcs Brass Lead Screw Nuts
- Material: made of high quality copper, more durable, more flexible, long service life, fine workmanship
Fudeshe
Fudeshe 400mm 8mm T8 Lead Screw Set,T8 Screws Stepper Motor Screws,Linear Motion Rod Shaft Guide for 3D Printer and DIY
£16.99- Product material: 304 stainless steel, high tensile strength, hardness is higher than the market ordinary material
- Size:Lead Screw Length: 400mm,Lead Screw Diameter: 8mm,Coupler Shaft Usage:5mm to 8mm,Coupler Dimension:25*19mm,Pillow Bearing Block Bore:8mm
Rattmmotor
RATTMMOTOR 150 mm Width CNC Linear Table Actuator, Effective Stroke 300 mm, X Y Z Axis, Cross Sliding Table Linear Rail Guide, Ball Screw SFU1605 with Motor Mount + 2 Limit Switches
£292.91- Package includes: 1 x ZBX150 300 mm travel X/Y/Z axis cross sliding table linear slide rail guide + 2 limit switches + 1 motor mount (without motor).
- Basic parameters: effective stroke: 300 mm; horizontal load: 120 kg; vertical carry: 50 kg; width: 150 mm.
Yanmis
Linear Guide Slide Table, Aluminum Alloy Screw Sliding Table High Rigidity Rail for 3D Printer Engraving Machine etc Combined Machine(400mm -Black)
£35.39- ★★★【High Quality】The product has high rigidity and low thermal deformation.Ideal foundation for combined machine tools and automated production lines.
- ★★★【Suitable for】This cnc sliding table can used for linear reciprocating applications, suitable for the automation industry
Zeberoxyz
Zeberoxyz 250mm Length Effective Travel Dual Optical Axis Manual Sliding Table Linear Rail Guide Ballscrew SFU1605 with Handwheel for CNC Equipment Transformation (Size:250mm)
£86.99- Linear Stage Table Material: Made of high quality metal, fine workmanship, stable performance and high work efficiency, and is an essential part of linear motion
- High Accuracy: Heavy load resistance SFU1605, Repeat positioning accuracy is ±0.03mm; Load: Maximum horizontal load capacity: 30kg; Maximum vertical load capacity: 15kg;
Reliabot
ReliaBot Tr10x8 Lead Screw Brass Nut (Acme Thread, 2mm Pitch, 4 Start, 8mm Lead) for Diameter 10mm T10 Lead Screw of 3D Printer Z Axis
£15.11- For diameter 10mm T10x2 lead screw
- Brass nut, with 4 holes for fixing to the machine
Cuque
Gear Motor 6V, High Torsion 60RPM Long Output Shaft Micro Electric Gear Motor M4x55 Threaded Rod for Landing Gear
£7.87- COMPACT AND LIGHTWEIGHT: DC gear motor is small in size and light in weight, easy to install wheels on the output shaft of the motor or helicopter blades
- CORROSION RESISTANT AND DURABLE: The quality of bearings and the service life of gear motors have been improved, very durable, copper material is corrosion resistant
Cyfang
screw pitch 2pcs Double Hand Screw Bolt M3 M4 M5 Metric Thread Double Threaded Screw Studs 304 Stainless Steel Joint Screw Bolt shaft nut (Color : 150mm, Size : M5)
£13.79- Material: 304 stainless steel
- Name: Double screw
Limit
Limit - Gauge Set for diameters 1-15 mm
£12.00- For measuring hole diameters and slot widths
- 1-15mm measurement scale
Axoc
AXOC Silicone Resin Mold Mold Exquisite Beautiful Easy Clean Unique Design Shiny Elastic Pipe Shape For DIY Pipe Model Making
£4.12- Uses: Using sophisticated production technology, this silicone mold is suitable for DIY making pipa models.
- Ideal Gift: Our silicone mold is ideal gift for your friends or family as birthday, christmas, mother's day, valentine's day, new year's gift.
Partykindom
PartyKindom Contour Gauge Measuring Scale Gauge Profile Tool with Lock Shape Duplicator Profile Gauge Duplicator Profile Gauge with Lock Gauge Measure Ruler Gauge Tool To Clamp Abs Copier
£12.29- Gauge measure ruler-- outstanding look to read the scale even in weak light environment.
- Master outline gauge-- with premium materials and updated craftmanship, it allows you to push the profile gauge very smoothly and precisely.
Dewin
Voltage Detector Pen, Voltage Detector Pen Digital Display 12‑250V AC DC Volt Tester Circuit Line Test Pen for Repair
£6.99- Easy in Testing --- Supports auto testing, line on off testing, circuit break point testing, DC and AC power detection and high voltage detection.
- Wide Test Range --- Able to directly test 12‑250V AC and DC circuits, as well as indirect detection of the neutral line, phase line and so on.
Katsu Tools
KATSU Digital Depth Gauge 0-80mm Digital Height Depth Measuring Tool for Trimmer Router Woodworking Milling Cutter Table Saw
£17.99- Measure accurately and instantly to within a thousandth of an inch!
- This compact gauge includes a digital readout in metric or imperial as well as a steel rule. Measures from 0 to 3-1/4" (0-80MM).
Healeved
Contour Gauge Gauges Measure Ruler Outline Measuring Ruler Wood Marking Tool Profile Gauge Measure Ruler Duplicator Woodworking Hand Tool Abs Copier To Clamp
£12.59- Tools for wood-- work in woodwork, car body, car sheet metal, stainless steel or any repeat.
- Wood marking tool-- made of abs plastic, high strength, , no rust which will not scratch the original surface of the copy or rust shape.
Gatuida
Gatuida Contour Gauge Two-headed Tools Gauge Tool Duplicator Gauge Profile Tool with Lock Beer Bottle Profile Gauge Measure Ruler Outline Gauge Jewelry Magnifying Glass Abs Copier Manual
£11.59- Gauge duplicator with lock-- with this , you can copy shapes and match incisions for accurate measurements.
- Tool-- made of abs plastic, high strength, , no rust which will not scratch the original surface of the copy or rust shape.
Gleavi
Contour Gauge Stainless Carpetas Wood Marking Tool Duplicator Comb Gauge Duplicator Dayproud Instant Template Profile Gauge Measure Ruler Gauges Measure Ruler Elastic Copier Abs
£10.89- Tools for wood-- made of abs plastic, high strength, , no rust which will not scratch the original surface of the copy or rust shape.
- Profile gauge measure ruler-- suitable for any shape, such as ceramics, keys, tiles, laminates, carpets, winding tubes, round frames, channels and many items.
Agatige
Endodontic Measuring Ring, Professional Stainless Steel Dental Endodontics Finger Ruler, Endodontic Ruler Dental Gauge, Root Canal Measurement Instrument
£4.99- 【Stainless Steel Material】 Endodontic measuring ring is made of high-quality stainless steel, which is strong, not easy to damage, and has a long service life.
- 【Clear Scale】 The size of Endo gauge finger ruler is 35mm, the scale is clear, the reading is convenient, the operation is simple, and it is convenient for dentists to use.
Gatuida
Gatuida Contour Gauge Beer Bottle Duplication Gauge Shape Gauge Profile Gauge Measure Ruler Glass Coffee Mugs Floral Duplications Gauge with Lock Outline Gauge Tool Angle Copier Wood Abs
£12.49- Gauge-- suitable for any shape, such as ceramics, keys, tiles, laminates, carpets, winding tubes, round frames, channels and many items.
- Gauges measure ruler-- with premium materials and updated craftmanship, it allows you to push the profile gauge very smoothly and precisely.