Max. flow rate 85 L/min, 250 Watts, 230v 1ph motor, Maximum head (lift height) 6M, Can pump to within 3mm of floor (when set in water 12.75mm deep or more), Thermal overload protection, Complete with �", �" & 1" hose adaptor & 10M waterproof cable
INSTALLATION AND USE Suitable for use in domestic, civil and industrial applications where the water, such as groundwater, surface water and sewage water, contains suspended solids up t50 mm They are suitable for use in applications such as for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal.
【Powerful Home Booster Pump】: This pressure booster pump use 24V DC power supply, which is within the safe voltage, has no leakage and is safer for home use, DC 24V water pressure lift 22m(72 feet). Large water flow rate: 32L/min, no waiting for peak water
【Automatic Induction】: This booster pump has built-in intelligent water flow sensor, the water pump can automatically start and stop the impulse according to the opening and closing of the tap, If the water pressure is too low to reach the starting point of the pump, you can start the manual mode, after run 30 minutes, and then automatically switch to the automatic mode, manual boost and automatic boost can be switched at will
【Activated by rising water levels】The Automatic Float Switch is an automatic bilge pump switch that is activated by a float mechanism. If for any reason your boat should leak, the water will raise the float and activate the pump.
【Connect it to a pump】It can be used for automatic operation of 12V, 24V, 32V bilge pumps or alarms. Turns pump on when the water level reaches 2in (51mm), and turn pump off when the water level reaches 3/4in (19mm).
Technical parameters: Cast Iron motor body with cast iron impeller which acts as a grinder / breaker Float Switch Electric induction engine Input: 220V - 240V / 50Hz Max. flow : 18000 L / h Max. length of suction - 200m Max. depth of suction: 11m
Cast Iron Hermetic casing (fully submersible) Weight : 15 kg Height : 44cm Diameter with outlet nozzle: 28 cm 3 x Connectors/ hose adapters included: 2”(52 mm), 1,5"(38 mm), 1"(25 mm) Power cord length - 10m
【Activated by rising water levels】The Automatic Float Switch is an automatic bilge pump switch that is activated by a float mechanism. If for any reason your boat should leak, the water will raise the float and activate the pump.
【Connect it to a pump】It can be used for automatic operation of 12V, 24V, 32V bilge pumps or alarms. Turns pump on when the water level reaches 2in (51mm), and turn pump off when the water level reaches 3/4in (19mm).
【LED Car Logo Lights Better Compatibility】Car Door Light Logo has two direct connection interfaces, for 2011-2021 1 series, 2014-22 2 series, 2006-19 3-series, 2013-2019 4 series,05-22 5-series, 2011-18 6 series,2002-2022 7-series ,2015-22 X1, F39 X2, 2011-17 X3, 2014-18 X4,2007-13 X5,X6,X7,M,M3,M5/6/7 and so on,door projector lights which are suitable for most new an d old models.
【HD Car Door Lights Projector】Lights for door logo Using a high-brightness Led bulb with 500 lumens, the light passes through a high-definition heat-resistant film, and after passing through an ultra-high-definition lens, an undistorted and decolorized pattern will be displayed on the ground.
🚗【Automatic Induction Switch】 - When you open the car door, the logo light projection always shows on the ground. Automatically turn off when you close the car door.
🚗【Easy to Install】 - I just removed the old lamp and inserted this product without changing wires or drilling holes. (Please make sure your car has original door light first)
【Automatic Induction Switch】When you open the car door, the light logo projection is always displayed on the ground, when you close the door, the car door logo lights turn off automatically.
【Safe and durable】The door lights are made of high-quality superconducting aluminum heat sink, low-power chips and LED cold light source, which can dissipate heat efficiently, stabilize the current, and ensure high temperature resistance and heat dissipation efficiency.
Easy and quick installation, This door light projector can be installed in minutes with the included 3M tapes, NO Driling, NO Wiring required. No damage to your car.
Universal fit, the car door lights can be installed on all straight and flat car door panels, please check the picture to see if your car door is suitable.
【Fits Many Models】: Sport 2010-2021; Freelander 2 2010-2015; Discovery 4 2010-2015; Aurora 2013-2019; Discovery 5 2017-2021; Compatible with Range Rover 2010-2021
【Convenient】: High definition (HD) and high brightness projection, easy and convenient installation, no need to interrupt the installation line, and will not damage the car.
【Personalized Free Customization, Support to Customize Any LOGO】- Car Door Sill Lights Custom LOGO step, send the LOGO(text or simple picture) to us. You can customize the name, the car brand, the memorable text, Applicable to all models.
【Switch Button Can Change Colors At Will】Car door sills led- RGB multi-color pedal light, Personalized pedal lights led preset 7 light colors (colorful, white, red, blue, green, yellow, purple). Note: Since the package will consume power during transportation, please charge it before use.
Customized Car Door Projector Lights. Car door wireless sensor Light Lamps, Free custom for the logo film slide,Powered by 3 Pcs AAA batteries(Not Included)
Best customized gifts. we can custom any photo, text, logo pattern.Just send us your design, we'll make what you want!