Easy Operation- Connect and Go It provides a quick reading to determine if a vehicle battery needs a jump or replacing and also the alternator output status Various Colored LEDs indicate the battery or the alternator status
✅【A MUST TOOL IN YOUR GARAGE】- With the up-to-date testing technology, it provides a quick reading to determine if a vehicle battery needs a jump or replacing and also the alternator output status. All you need to do is just connect and play. Save your time and bucks.
✅【BATTERY HEALTH CHECK】- Applied with the latest testing algorithm, the tester will scan the battery and get the results in seconds, including the State of Health, the State of Charge, the Internal Resistance and the Testing Conclusion (Poor, Good, Great). All types of 12V 100-2000CCA lead acid batteries can be tested, including Regular Flooded, AGM Flat Plate, AGM Spiral, GEL and EFB. The Battery Standards includes CCA, BCI, CA, MCA, JIS, DIN, SAE etc.
✅【UNIVERSAL APPLICATION】- Input Voltage: 12-24V DC; Output: 5V DC, 3.1Amp. Dual USB ports for multiple devices charging at the same time. It can charge just about any phone, Tablet, GPS, camera, etc.
✅【SAE Quick Release Connection】- Standard SAE connector complying with most brands of SAE cables. 45cm Fused SAE Ring Terminal harness for easy connection with the battery to provide power for the USB charger. It also works with most brands of battery chargers.
🔥【Universal Application】- Input Voltage: 12-24V; Output: 5V, 3.1Amp. It can charge just about any phone, Tablet, GPS, camera, etc. With the SAE quick release connection design, it can work directly with your exsiting SAE pigtails on your bikes. Also the 7.5Amp fused SAE to Ring Terminal cable included in the kit can work with your battery chargers or maintainers to charge the battery conveniently.
🔥【Waterproof Cap Protection】- Waterproof cap included to protect internal circuit. Make sure keep the cap on when raining to protect the electrical system. [ NOTE ] - DISCONNECT THE USB CHARGER AFTER EACH USE TO PROTECT THE CIRCUIT AND ENSURE SAFETY.
Easy Operation- Connect and Go. It provides a quick reading to determine if a vehicle battery needs a jump or replacing and also the alternator output status. Various Colored LEDs indicate the battery or the alternator status.
Safety Ensured- Reverse-hookup and Over-voltage protection, making it safe and simple to use. The Digital Voltmeter Testing Range: 4-20V DC.If the voltage is under 4volts, the screen will display - "LO"; Above 20volts, the screen will display - "HI"
➤【Universal Application】- Input Voltage: 12-24V; Output: 5V, 3.1Amp. It can charge just about any phone, Tablet, GPS, camera, etc. With the SAE quick release connection design, it can work directly with your exsiting SAE pigtails on your bikes.
➤【Waterproof Cap Protection】- Waterproof cap included to protect internal circuit. Make sure keep the cap on when raining to protect the electrical system. [ NOTE ] - DISCONNECT THE USB CHARGER AFTER EACH USE TO PROTECT THE CIRCUIT AND ENSURE SAFETY.
✅【Universal Application】- Input Voltage: 12-24V; Output: 5V, 3.1Amp. It can charge just about any phone, Tablet, GPS, camera, etc. With the SAE quick release connection design, it can work directly with your exsiting SAE pigtails on your bikes. Also the 7.5Amp fused SAE to Ring Terminal cable included in the kit can work with your battery chargers or maintainers to charge the battery conveniently.
✅【Waterproof Cap Protection】- Waterproof cap included to protect internal circuit. Make sure keep the cap on when raining to protect the electrical system. [ NOTE ] - DISCONNECT THE USB CHARGER AFTER EACH USE TO PROTECT THE CIRCUIT AND ENSURE SAFETY.
Easy Operation- Connect and Go It provides a quick reading to determine if a vehicle battery needs a jump or replacing and also the alternator output status Various Colored LEDs indicate the battery or the alternator status
✅【A MUST TOOL IN YOUR GARAGE】- With the up-to-date testing technology, it provides a quick reading to determine if a vehicle battery needs a jump or replacing and also the alternator output status. All you need to do is just connect and play. Save your time and bucks.
✅【BATTERY HEALTH CHECK】- Applied with the latest testing algorithm, the tester will scan the battery and get the results in seconds, including the State of Health, the State of Charge, the Internal Resistance and the Testing Conclusion (Poor, Good, Great). All types of 12V 100-2000CCA lead acid batteries can be tested, including Regular Flooded, AGM Flat Plate, AGM Spiral, GEL and EFB. The Battery Standards includes CCA, BCI, CA, MCA, JIS, DIN, SAE etc.
✅【UNIVERSAL APPLICATION】- Input Voltage: 12-24V DC; Output: 5V DC, 3.1Amp. Dual USB ports for multiple devices charging at the same time. It can charge just about any phone, Tablet, GPS, camera, etc.
✅【SAE Quick Release Connection】- Standard SAE connector complying with most brands of SAE cables. 45cm Fused SAE Ring Terminal harness for easy connection with the battery to provide power for the USB charger. It also works with most brands of battery chargers.
🔥【Universal Application】- Input Voltage: 12-24V; Output: 5V, 3.1Amp. It can charge just about any phone, Tablet, GPS, camera, etc. With the SAE quick release connection design, it can work directly with your exsiting SAE pigtails on your bikes. Also the 7.5Amp fused SAE to Ring Terminal cable included in the kit can work with your battery chargers or maintainers to charge the battery conveniently.
🔥【Waterproof Cap Protection】- Waterproof cap included to protect internal circuit. Make sure keep the cap on when raining to protect the electrical system. [ NOTE ] - DISCONNECT THE USB CHARGER AFTER EACH USE TO PROTECT THE CIRCUIT AND ENSURE SAFETY.
Easy Operation- Connect and Go. It provides a quick reading to determine if a vehicle battery needs a jump or replacing and also the alternator output status. Various Colored LEDs indicate the battery or the alternator status.
Safety Ensured- Reverse-hookup and Over-voltage protection, making it safe and simple to use. The Digital Voltmeter Testing Range: 4-20V DC.If the voltage is under 4volts, the screen will display - "LO"; Above 20volts, the screen will display - "HI"
➤【Universal Application】- Input Voltage: 12-24V; Output: 5V, 3.1Amp. It can charge just about any phone, Tablet, GPS, camera, etc. With the SAE quick release connection design, it can work directly with your exsiting SAE pigtails on your bikes.
➤【Waterproof Cap Protection】- Waterproof cap included to protect internal circuit. Make sure keep the cap on when raining to protect the electrical system. [ NOTE ] - DISCONNECT THE USB CHARGER AFTER EACH USE TO PROTECT THE CIRCUIT AND ENSURE SAFETY.
✅【Universal Application】- Input Voltage: 12-24V; Output: 5V, 3.1Amp. It can charge just about any phone, Tablet, GPS, camera, etc. With the SAE quick release connection design, it can work directly with your exsiting SAE pigtails on your bikes. Also the 7.5Amp fused SAE to Ring Terminal cable included in the kit can work with your battery chargers or maintainers to charge the battery conveniently.
✅【Waterproof Cap Protection】- Waterproof cap included to protect internal circuit. Make sure keep the cap on when raining to protect the electrical system. [ NOTE ] - DISCONNECT THE USB CHARGER AFTER EACH USE TO PROTECT THE CIRCUIT AND ENSURE SAFETY.
Easy Operation- Connect and Go It provides a quick reading to determine if a vehicle battery needs a jump or replacing and also the alternator output status Various Colored LEDs indicate the battery or the alternator status
✅【A MUST TOOL IN YOUR GARAGE】- With the up-to-date testing technology, it provides a quick reading to determine if a vehicle battery needs a jump or replacing and also the alternator output status. All you need to do is just connect and play. Save your time and bucks.
✅【BATTERY HEALTH CHECK】- Applied with the latest testing algorithm, the tester will scan the battery and get the results in seconds, including the State of Health, the State of Charge, the Internal Resistance and the Testing Conclusion (Poor, Good, Great). All types of 12V 100-2000CCA lead acid batteries can be tested, including Regular Flooded, AGM Flat Plate, AGM Spiral, GEL and EFB. The Battery Standards includes CCA, BCI, CA, MCA, JIS, DIN, SAE etc.
✅【UNIVERSAL APPLICATION】- Input Voltage: 12-24V DC; Output: 5V DC, 3.1Amp. Dual USB ports for multiple devices charging at the same time. It can charge just about any phone, Tablet, GPS, camera, etc.
✅【SAE Quick Release Connection】- Standard SAE connector complying with most brands of SAE cables. 45cm Fused SAE Ring Terminal harness for easy connection with the battery to provide power for the USB charger. It also works with most brands of battery chargers.
🔥【Universal Application】- Input Voltage: 12-24V; Output: 5V, 3.1Amp. It can charge just about any phone, Tablet, GPS, camera, etc. With the SAE quick release connection design, it can work directly with your exsiting SAE pigtails on your bikes. Also the 7.5Amp fused SAE to Ring Terminal cable included in the kit can work with your battery chargers or maintainers to charge the battery conveniently.
🔥【Waterproof Cap Protection】- Waterproof cap included to protect internal circuit. Make sure keep the cap on when raining to protect the electrical system. [ NOTE ] - DISCONNECT THE USB CHARGER AFTER EACH USE TO PROTECT THE CIRCUIT AND ENSURE SAFETY.
Easy Operation- Connect and Go. It provides a quick reading to determine if a vehicle battery needs a jump or replacing and also the alternator output status. Various Colored LEDs indicate the battery or the alternator status.
Safety Ensured- Reverse-hookup and Over-voltage protection, making it safe and simple to use. The Digital Voltmeter Testing Range: 4-20V DC.If the voltage is under 4volts, the screen will display - "LO"; Above 20volts, the screen will display - "HI"
➤【Universal Application】- Input Voltage: 12-24V; Output: 5V, 3.1Amp. It can charge just about any phone, Tablet, GPS, camera, etc. With the SAE quick release connection design, it can work directly with your exsiting SAE pigtails on your bikes.
➤【Waterproof Cap Protection】- Waterproof cap included to protect internal circuit. Make sure keep the cap on when raining to protect the electrical system. [ NOTE ] - DISCONNECT THE USB CHARGER AFTER EACH USE TO PROTECT THE CIRCUIT AND ENSURE SAFETY.
✅【Universal Application】- Input Voltage: 12-24V; Output: 5V, 3.1Amp. It can charge just about any phone, Tablet, GPS, camera, etc. With the SAE quick release connection design, it can work directly with your exsiting SAE pigtails on your bikes. Also the 7.5Amp fused SAE to Ring Terminal cable included in the kit can work with your battery chargers or maintainers to charge the battery conveniently.
✅【Waterproof Cap Protection】- Waterproof cap included to protect internal circuit. Make sure keep the cap on when raining to protect the electrical system. [ NOTE ] - DISCONNECT THE USB CHARGER AFTER EACH USE TO PROTECT THE CIRCUIT AND ENSURE SAFETY.
Easy Operation- Connect and Go It provides a quick reading to determine if a vehicle battery needs a jump or replacing and also the alternator output status Various Colored LEDs indicate the battery or the alternator status
✅【A MUST TOOL IN YOUR GARAGE】- With the up-to-date testing technology, it provides a quick reading to determine if a vehicle battery needs a jump or replacing and also the alternator output status. All you need to do is just connect and play. Save your time and bucks.
✅【BATTERY HEALTH CHECK】- Applied with the latest testing algorithm, the tester will scan the battery and get the results in seconds, including the State of Health, the State of Charge, the Internal Resistance and the Testing Conclusion (Poor, Good, Great). All types of 12V 100-2000CCA lead acid batteries can be tested, including Regular Flooded, AGM Flat Plate, AGM Spiral, GEL and EFB. The Battery Standards includes CCA, BCI, CA, MCA, JIS, DIN, SAE etc.
✅【UNIVERSAL APPLICATION】- Input Voltage: 12-24V DC; Output: 5V DC, 3.1Amp. Dual USB ports for multiple devices charging at the same time. It can charge just about any phone, Tablet, GPS, camera, etc.
✅【SAE Quick Release Connection】- Standard SAE connector complying with most brands of SAE cables. 45cm Fused SAE Ring Terminal harness for easy connection with the battery to provide power for the USB charger. It also works with most brands of battery chargers.
🔥【Universal Application】- Input Voltage: 12-24V; Output: 5V, 3.1Amp. It can charge just about any phone, Tablet, GPS, camera, etc. With the SAE quick release connection design, it can work directly with your exsiting SAE pigtails on your bikes. Also the 7.5Amp fused SAE to Ring Terminal cable included in the kit can work with your battery chargers or maintainers to charge the battery conveniently.
🔥【Waterproof Cap Protection】- Waterproof cap included to protect internal circuit. Make sure keep the cap on when raining to protect the electrical system. [ NOTE ] - DISCONNECT THE USB CHARGER AFTER EACH USE TO PROTECT THE CIRCUIT AND ENSURE SAFETY.
Easy Operation- Connect and Go. It provides a quick reading to determine if a vehicle battery needs a jump or replacing and also the alternator output status. Various Colored LEDs indicate the battery or the alternator status.
Safety Ensured- Reverse-hookup and Over-voltage protection, making it safe and simple to use. The Digital Voltmeter Testing Range: 4-20V DC.If the voltage is under 4volts, the screen will display - "LO"; Above 20volts, the screen will display - "HI"
➤【Universal Application】- Input Voltage: 12-24V; Output: 5V, 3.1Amp. It can charge just about any phone, Tablet, GPS, camera, etc. With the SAE quick release connection design, it can work directly with your exsiting SAE pigtails on your bikes.
➤【Waterproof Cap Protection】- Waterproof cap included to protect internal circuit. Make sure keep the cap on when raining to protect the electrical system. [ NOTE ] - DISCONNECT THE USB CHARGER AFTER EACH USE TO PROTECT THE CIRCUIT AND ENSURE SAFETY.
✅【Universal Application】- Input Voltage: 12-24V; Output: 5V, 3.1Amp. It can charge just about any phone, Tablet, GPS, camera, etc. With the SAE quick release connection design, it can work directly with your exsiting SAE pigtails on your bikes. Also the 7.5Amp fused SAE to Ring Terminal cable included in the kit can work with your battery chargers or maintainers to charge the battery conveniently.
✅【Waterproof Cap Protection】- Waterproof cap included to protect internal circuit. Make sure keep the cap on when raining to protect the electrical system. [ NOTE ] - DISCONNECT THE USB CHARGER AFTER EACH USE TO PROTECT THE CIRCUIT AND ENSURE SAFETY.