Test results based on GB, BCI, CCA, EN, CA, MCA, DIN, SAE, JIS and IEC Standards.Simple and easy to use, Accurate results in milliseconds, Battery Life Analysis, Analysis Result : Good or Replace, Language Available: English, French, German, Spanish, Italy
Vehicle cranking system test--- cranking time, voltage and status. vehicle charging system test—load voltage, unloaded voltage, ripple status and charging system status.
【Print Data】 Built-in thermal printer, AUTOOL BT760 battery load tester can print data after testing. It can be printed separately, that is, after a test is completed, the results can be printed. If you want to print four data items on the printing paper at the same time, please do not tear off the printing paper before printing the four data items.
【Powerful Function】 This car battery tester displays the decision of the starting system, starting voltage and starting time in milliseconds. In addition, the battery diagnostic tool can check the 12V or 24V charging system to ensure that the output voltage of the generator is in a normal state, the rectifier diode is working normally, and the charging current is in a normal state.
【Newest Version】 The BT70 car battery tester is a start-up lead-acid battery performance test tool. It can check the battery capacity easily.
【12V&24V】 The voltage detector has two modes: 12v/24v. After the device is powered on, it automatically recognizes the 12v or 24v battery voltage type, and displays the measured voltage value and battery status on the LCD screen.
[Mainly Function] BT760 can quickly detect common failures of the starting systems and charging systems of cars, which is convenient for the rapid maintenance of cars and motorcycles.It is a professional Cranking and Charging System Battery Analyzer Scan Tool.
[Multiple Languages Support] Automotive Battery Load Tester Support multiple languages, which including English, Russian, Spanish, French, German, etc. Other customized language version are also provided.It’s the perfect professional battery analyzer for enthusiasts, small garages, independent repairs.
【5 stage indicator】 AUTOOL BT60 divides it into 5 stages. 20% is replaced; 40% is charged; 60% is charged; 80% is good; 100% is good.
【High Efficiency】 A portable 12V/24V lead-acid battery capacity analysis and test tool, which can quickly and accurately detect the battery power and provide appropriate suggestions for the current battery status.
AUTOOL BT-760 -- This battery load tester is a more advanced tool with 2.8 inches large colorful screen and print function. It suits to 12V/24V starting & charging system and can quickly test the cold start current, internal resistance, battery life, and accurately display the battery condition. The features include Battery test, Cranking test, Charging test, Maximum load test and reverse power connection protection.
EXTENSIVE TEST RANGE -- This product can test all kinds of automotive start-up lead-acid batteries, including AGM flat batteries, AGM spiral batteries & gel batteries and include currently the worlds majority of battery standards CCA, JIS, DIN, IEC, EN, SAE, GB.
Wide application:Test all automotive(include 12V car and 24V heavy trucks) cranking lead acid battery, including ordinary lead acid battery, AGM flat plate battery, AGM spiral battery, and Gel battery, etc.
Easy to use:Battery Tester Car directly detect bad cell battery,directly test the battery with loss of electricity, no need to full charge before testing.
【MULTI-LANGUAGES】:This Car Battery Tester supports multi-languages, customer can select different language package, which includes: English, Russian, Spanish, French, German, Japanese turkish etc.
【HIGH EFFICIENCY】: Quick read and accurate test result display in just 3 seconds.Necessary device for home user and economical: allows you independently verify battery tests performed by others, and avoid costly or annoying Auto errors.
Test all automotive(include 12V car and 24V heavy trucks) cranking lead acid battery, including ordinary lead acid battery, AGM flat plate battery, AGM spiral battery, and Gel battery, etc.
Directly test the battery with loss of electricity, no need to full charge before testing. Polarity reverse connection protection, reverse connection will not damage the tester or affect the vehicle and battery.
Fundamental Parameters: The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 98 Cubic Inches / 1.6 Liters(1600 cc), Max Input Air Pressure: 120 psi / 8 bar, Fuel Tank Capacity: 1.6L ± 0.1L, Maximum Oil Output: 1.3L, Oil Output Pressure: 75mpa.
Foot-Actuated Design: The air hydraulic pump adopts a user-friendly foot-actuated design to provide hands-free operation for pumping and releasing the load, saving the operator's time and effort with strong power and high output pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock.
◆ Material: It is made of 45 # steel cylinder, 40Cr steel piston. High quality material, durable and long service life.
◆ Load Capacity: The product is easy to operate, which makes it easier to repair the car or lift heavy objects. The maximum load of the hydraulic jack is 10T.
【EXCELLENT REMOVING TOOL】- Our tire bead tool kit can perform greatly on the tires by loosening tire bead from the rim with leverage without removing the wheels
【HEAVY DUTY】- Though the tire bead breaker tool is lightweight, it has rugged construction and greater durability for long time use.
3 Tons (6600lb), -- vehicles under 3 tons can be upgraded easily, and the lifting height ranges from 120-370/170-420mm. (4.7in-15.57in/ 6.69in-16.53in) Power by DC 12v car battery.
For Sedan and SUV -- Equiped with two removable raised heads are respectively designed for Sedan, SUV. Include both cigarette lighter cable and battery clip for diffrent connection.
[ULTRA-THIN AND PORTABLE] - This portable hydraulic lifting cylinders is small in size, strong in load-bearing capacity. It is especially suitable for use in narrow spaces and has the characteristics of lightness and flexibility. The surface is finished with chrome plate to protect the using of longevity of the product.
[SPLIT DESIGN]- The split hydraulic lifting cylinder is easy to disassemble for storage. But it must be used with a hydraulic pump. The 10T/20T must be used with CP-180 hydraulic pump (ASIN: B08V14JL85); the 30T/50T must be used with CP-700 hydraulic pump (ASIN: B08TZQBC75).
❤️【Material】The spark tester probe is made of high quality plated shaft, rust and corrosion resistant, double ended flexible tool offers a straight boot, the internal bulb provide a long service life, this tool approx 11.4 inches/ 29cm in length, suitable dimension to check for spark in even hard to reach areas.
❤️【Function】Our spark plug tester can quickly diagnose ignition and engine issues and defects, which is a perfect diagnostic tool for any engine with a spark plug. It can diagnose ignition/ engine outboard motor issues or a fault in the fuel delivery system, troubleshoot spark plug connections, contact points, bad cables etc.
SPT360 Automotive Spark Plug Tester is a digital high frequency tester for testing the performance and strength of spark plugs with a frequency up to 9000 rpm It is compatible with all crankshaft engine and motorcycle spark plug testing among the market.
This Spark Plug & Ignition Tools can also be compared to five holes at the same time, simulating real speed and digital control, which greatly improve the test accuracy and work efficiency.
T1 A are the highest quality tools to make the work richtig. Sparks plugs from Setzer can occur when the sparks, the about the electrode column jumping, in time control Inkonsistent are, which makes the engine trip or loses in performance.
This handy little tool helps keep your Luecke in the Zuendker Zent Ester to see to see, whether you have a Inkonsistentes timing or not.
FUNCTION: The engine spark tester is a diagnostic tool for any engine with a spark plug, which can quickly and easily diagnose ignition/engine outboard motor issues or a fault in the fuel delivery system.
APPLICATION: For all internal & external combustion engines, cars, trucks, motorcycles, lawnmowers, chainsaws, trimmers, snow-blowers, generators etc.
FUNCTION: The engine spark tester is a diagnostic tool for any engine with a spark plug, which can quickly and easily diagnose ignition/engine outboard motor issues or a fault in the fuel delivery system.
APPLICATION: For all internal & external combustion engines, cars, trucks, motorcycles, lawnmowers, chainsaws, trimmers, snow-blowers, generators etc.
✔️【Quick Connection】: The rotatable quick coupler allows the quick and easy connection of adapters. Easy to operate and help you finish work quickly.
✔️【Material】: This compression tester set is made of copper and steel material, which is wearable and durable to use, can provide a long service life. All parts are organized in a heavy-duty storage case to protect the components and easy to carry and storage.
【VACUUM FILLING】3pcs coolant refill tool kit is a professional cooling system coolant replacement tool. Equipped with a vacuum pump and pressure gauge, there is no need for time-consuming air discharge, which greatly shortens the time for filling the coolant. Moreover, filling in a vacuum environment avoids the formation of bubbles & minimizes the risk of engine overheating, helping you to complete the filling safely & quickly.
【UNIVERSAL ADAPTER】Car radiator cooling system set is equipped with a funnel-shaped rubber adapter, which has good air-tightness and suitable for car van SUV truck.
????【Wide Application】:The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system, not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system. Proper fuel pressure is vital for engine operation and performance.
????【Professional Automotive Diagnostic Tool】:Professional manometer fuel injection pressure tester gauge kit with dual dial for accurate reading and a 140 PSI/10 Bar Scale.
Specifications: The oil pressure tester kit includes a pressure gauge, hose and adapter. It is used to check whether the parts in the fuel pump and vacuum system are worn or defective.
Suitable models: The tester is suitable for most common vehicles. Please ask us before purchasing special models.
❤️【Car Motorcycle Compression Tester】The cylinder testing kit Includes 1PCS 300PSI spring buckle gauge, 1PCS straight rubber cone adapter, 1PCS curved rubber cone adapter, 4PCS brass adapters, and 1PCS 16-inch extension hose.. The whole set of fuel pressure tester can bring you great convenience.
❤️【Triple Scale Gauge】 Manometer with triple graduation, measuring range in different UOMs, (0-300 psi, 0-21 kg/cm2, 0-20 bar, +/- 1.6% tolerances, 2-1/2” OD). Acrylic glass meter cover and with rubber cover protection to prevent scratches has excellent shock absorption performance. The built-in one-way valve with pressure holding function, you can get accurate readings from our engine compression gauge.
❤️【Engine Compression Tester】This cylinder testing kit including 1PCS spring buckle gauge; 5PCS brass adapter(M10, M12, M14, M16, M18, widely used); 1PCS 200mm metal Extension rod connector, 2PCS metal aluminum rod straight and bent rod, an extension rod hose with M12*1.25 thread and an extension rubber hose (16 inches). The whole set of fuel pressure tester can bring you great convenience.
❤️【Multi-Function】The cylinder compression tester kit is used to quickly and accurately test the cylinder pressure of gasoline engines. Compression test set is designed to detect a variety of common engine faults such as stuck valve, carbon deposits, cracked cylinder head or defective main gasket, poor or worn piston ring installation, burned or damaged piston.
Flexible Hose: Permanently oil primed, 1.25m(300PSI)long flexible hose, enables access to difficult to reach oil switch ports. There are also a small bag of seal gaskets, which are used for replacing the ones on adapters.
Oil Switch Port Adapters: The 10 adapters are marked with number, which can help you choose the right one quickly. Gauge Scale: 0 - 10bar, 0 - 140psi(tolerance +/-5%).
This Engine Radiator Cooling System Vacuum Purge Refill Kit dramatically reduces cooling system refilling time eithout the mess not introducing air-locks and system bleeding.
Simply plug into the workshop air line, attach to the cooling system header and create a vacuum. Complete the process by attaching the filler hose and opening the valve, allowing your pre-mixed coolant to flow into the system.