✔【Better Performance】Enhance anti-interference ability and stability, new technologies have been adopted to reduce the loss of transmission efficiency caused by interference in the 2.4 GHz band. Alleviating the problem of the instability of the device connection, frequent disconnection, and signal interruption.
✔【Bluetooth 5.0 Adapter】: Low latency 5.0 bluetooth adapter adopt the latest Bluetooth 5.0 chipset greatly reduce the power consumption of Bluetooth.Its greatly improved the data transmission rate of Bluetooth technology, reaching 3Mbps, faster than bluetooth 4.0. Support HIFI, high sound quality, no delay, stable connection.
USB Supply --Bluetooth adapter connect it on the USB port and connect it to your audio device via 3.5mm aux audio cable (included) while using, never worry it will run out of power while listening to music.[Operation Range: Up to 10m / 33ft indoors (without any blocking objects); Achieve a range of up to 50ft (15m) in open air.[P.S. The operating range may be affected by many factors.]
Transmitter Receiver 2-in-1 --The Universal Bluetooth Audio Adapter to stream audio to your Bluetooth headset from your non-Bluetooth audio source (such as TV, MP3, CD player, PC or book reader), or enable home stereo Bluetooth for mobile phones and tablets Receive wireless music streams.[P.S.Only one device can be connected at a time.
Transmitter & Receiver: 3 in 1 design bluetooth adapter, there are 2 modes (TX and RX), it can be a transmitter and also a receiver. TX (red light) mode is for the transmitter and RX (blue light) is for the receiver. it can turns non-Bluetooth PC or laptop into Bluetooth-capable. Pairing name (receiver mode): ZF-360
Note: Before use, you must hold down the center switch to turn on the power. In the reception mode, you can adjust the volume and change up and down. Long press the left / right function keys to adjust the volume and short press to adjust the tracks up and down. The middle button is the pause button.
【Enjoy Wireless Streaming Music】Babacom bluetooth receiver can be connected to non-Bluetooth car audio systems, home stereos, speakers, wired headphones via the 3.5mm AUX adapter; And equipped with a Bluetooth 5.0 chip for stable connection / fast transmission / wide signal range. Just pair it with your phone and start listening to your favorite music!
【Intelligent Noise Reduction Tech】Our aux bluetooth receiver adopts the latest CVC8.0 Noise Cancellation and Digital Signal Processor (DSP) technologies, which can eliminate echo and block out intrusive background noise (such as wind, traffic, or crowds), providing you with crystal-clear calling sounds.
Bluetooth Adapter 5.0 for computer, the frequency range is 2.4GHz, 20M Signal Transmission, apply EDR (faster data transmission), Transfer rate up to 3Mbps.
Support Windows 10 / 8.1 / 8/7 / Vista / XP. Can make computer Bluetooth connection with other devices (NOT compatible with Mac OS, Windows RT and Linux), compatible with Bluetooth V3.0 / 2.1 / 2.0 / 1.1, and support multi-device connection (more than two can be connected on different frequencies bands)
3 In 1: The integrated Bluetooth audio transmitter and receiver with 3.5mm Aux jack makes it more convenient when you use the Bluetooth adapter. In the state of receiving mode, you can directly use the microphone that comes with the adapter to receive audio.
Long-distance Reception: The Bluetooth connection is stable enough to receive signals at a range of 33 feet.
Latest Bluetooth 5.1: Bluetooth 5.1 technology enhances the performance of Bluetooth audio. Compared with Bluetooth 5.0, Bluetooth 5.1 offers a more stable audio transmission, less sound delay, better sound quality, and better interference rejection. Wireless distance up to 10m.
2 in 1: The USB Bluetooth Transmitter Receiver supports transmit and receive functions 2 in 1. More conveniently, the Aux Bluetooth Adapter for Car supports reconnects automatically to the last Bluetooth device every time, eliminating the trouble of repeated and tedious manual connections.
✅【2-in-1 Transmitter and Receiver - No More Wires】 - This Bluetooth adapter comes with 2 modes to act as an audio transmitter (TX mode), turning non-Bluetooth TV, PC, computer, CD player, MP3/MP4, switch, etc. into a Bluetooth transmitter with a 3.5mm jack input port. It can also be used as an Aux Bluetooth audio receiver (RX mode) for non-Bluetooth devices, such as car audio systems, speakers, headphones, radios, etc. Ideal for wireless music transmission at home or in the car.
✅【Wireless Bluetooth 5.0 Stable Connection】- This Bluetooth adapter uses the latest Bluetooth 5.0 technology with low latency, high sound quality and low noise to ensure stable signal and clearer sound quality when playing music and audio calls, so you can enjoy HD music surround in your car.
Well Designed Product:Made of high quality soft silicone,no odor,scratch proof,shock proof,antiskidding and durable.
Detailed Design: Fits your AirPods charging case perfectly and have access to all functions of the AirPods charging case without any interfere from the silicone case.
1. Designed for AirPods 1&2: Only for AirPods 1&2, not compatible with AirPods Pro (2019 Released) and AirPods 3 (2021 Released). (AirPods 1&2 NOT Included).
2. Premium Material: Made of high quality soft silicone, no odor, scratch proof, shock proof, antiskidding and durable.
【Compatible Models】Silicone Case fits perfectly with AirPods 2 & 1.Only for AirPods 1&2 (AirPods 1 2016 Released,AirPods 2 2019 Released), not compatible with AirPods Pro (2019 Released) , AirPods 3 (2021 Released) and AirPods Pro 2 (2022 Released). (AirPods 1&2 NOT Included). Supports Wired and Wireless Charging,front LED for Wireless Charging Case is visible while charging.
【Premium Materia】Maledan Airpods case is made of premium silicone, flexible, super comfortable feelings, non-toxic environmental Protective, one-piece molding process, leaving no fingerprints, it is washable and easily to clean.
【Newest Cute Design for airpods】Stylish, Funny, Cool. Specifically designed for girls and boys. It will be a best Gift.
【Premium Silicone Material】Dustproof,Scratchproof and Shockproof. This wireless charging case accessories providing great full protection for Apple Airpods.
【Unique Design】The iKNOWTECH Airpods case for Airpods is Ultra Thin,compactly and concise.It can 360°protect your Apple Airpods and Specifically Designed for AirPods Charging Case. Made of durable impact-resistant silicone rubber.
Top quality light malt extract adds extra body, especially to lighter beers and lagers
😃【Trible Layer Structure Design】: Internal PC material offers easy install. Middle liquid silicone protect airpods from bumps and drops. The outer advanced barrier can prevent airpods pro from dirt, scratch, oil and fingerprint.
😃【Upgrade Shockproof Liquid Silicone Material】: The protective airpods pro case is made of food grade silicone material, which could provides with stronger buffer when bumps or drops to fully protect your airpods pro.
😃【Trible Layer Structure Design】: Internal PC material offers easy install. Middle liquid silicone protect airpods from bumps and drops. The outer advanced barrier can prevent airpods pro from dirt, scratch, oil and fingerprint.
😃【Upgrade Shockproof Liquid Silicone Material】: The protective airpods pro case is made of food grade silicone material, which could provides with stronger buffer when bumps or drops to fully protect your airpods pro.
Models:This silicone protective case is precisely designed for Airpods 3rd generation charging cases 2021, front LED visible and supports wireless charging/wire charging with the case on.(Not fit for Airpods 1&2 / Airpods Pro)
Material: This compatible with Airpod 3 case cover is made of premium soft silicone, touching comfortable and smooth, no fingerprints. Washable and easy clean.
【Compatibility】This protective case perfect fit with Airpods 1st and 2nd generation, front LED is visible, precise cutout fully supports wireless charging without interference.
【Fashionable Cute Heart Design】The silicone soft shell can perfectly match your Airpods. Because of its simple hand-painted love pattern, it becomes a unique, cute. In addition to the regular transparent models, there are also special transparent black models for you to choose.
💖【Ultra Protection】Made of premium soft silicone, protects your AirPods 1/2 against bumps, drops, and scratches. And the bottom dust plug design keeps the charging port clean and sealed when not in use.
💖【Unobstructed charging】This cover for Airpods 1st 2nd generation Charging Case fits perfectly, won't affect wireless charging and convenience for charging the airpods 1 2 from the bottom without removing the case.
【Compatibility】This phone case is perfect compatible with iPhone XR, NOT compatible with other phone model, please confirm carefully before buying. Support wireless charging, which can be done directly without disassembling the phone case.
【Material】This phone case for iphone xr back cover case is made of soft TPU material, more durable that can be used for long time, smooth texture, but non-slip. Easy to remove or install. The TPU case is light, so it doesn't burden you when you use your iphone xr.
【Perfect Compatible】The cute clear protective silicone phone case with sparkle bling, compatible with iPhone XR. It customized for your phone.
【Premium Material】This case is made of high quality silicone TPU material which is flexible and durable to use. And the bumper in the 4 corners can effectively reduce the impact of the phone when it is dropped. This non-slip case also provides a smooth and comfortable grip feeling.
【Perfect Compatible】The cute protective soft silicone phone case,customized for iPhone XR. It fits closely with your iPhone XR (6.1 inch).
【Precise Cutouts】Easy Access to All Buttons & Camera & Speakers & Connectors. Button openings are perfectly aligned for the iPhone XR. This slim case is precision designed to retain the stylish outlook of your new phone.
✨[Compatibility] This case is only compatible with iPhone XR, not with the other phone models. So please confirm it carefully before purchasing.
✨[Premium material] This phone case is made of high-quality liquid silicone, soft and flexible. You can easily install and remove the case without scratching the phone. It is also durable and can be used for a long time.
【Compatibility】This phone case is only designed for iPhone XR(6.1 inch). [NOT compatible with other model sizes.] Please check your phone model carefully before placing order.
【Heart Pattern with Lanyard】A simple hand-painted heart pattern on the phone case add a unique feeling to the phone case. And this phone case comes with a lanyard (adjustable), allows you to hang your phone on your body with the right length to prevent loss.
【Compatibility】Only Customized for iPhone XR. Please check your phone model before purchasing. Support wireless charging, which can be done directly without disassembling the phone case.
【High Quality Material】This cute phone case is made of premium high-grade soft TPU, and the frame of the phone case is more solidified with a layer of durable silicone. Bring a comfortable touch. The transparent back material will be harder, which can highlight the beauty of the phone.
[Compatibility] This case is only compatible for iPhone XR (6.1-inch) , not for the other models. So please confirm it before purchasing. And it supports wireless charging without removing the case.
[Stylish design] The combination of simple golden heart pattern and glitter shiny back cover make your phone look more luxurious, attractive and unique, suitable for girls and women.
【Compatibility】This shiny phone case is compatible with iPhone XR. Please confirm the model carefully before purchasing.
【Dazzling design 】Luxurious shiny plated mirror design with cute double heart pattern, elegant with a touch of cuteness, simple but distinctive, make your iPhone XR more fashionable and charming.
[Simple Art Design:] Irregular lines outline a vivid and incomplete human face, which is set off by other objects and colors, giving the phone case an artistic sense, and making your iPhone XR look full of literary and artistic atmosphere.
[Applicable models:] Only designed for iphone XR [NOT suitable to other models]. This phone case support wireless charging, needn’t take off the case when charging. The charging opening, headphone jack, volume button and mute button are precisely cut, easy to press, perfectly fit your phone.
【Compatible Models】This phone case is perfect compatible with iPhone XR [6.1 Inch screen], NOT compatible with other phone model. Support wireless charging without removing the case.
【Exquisite Design】The gold 3D butterfly scattered on the black case is so vivid and pretty .The high quality printing technology keeps it against fading and rubbing off in the daily use.
【Compatibility】This phone case is perfect compatible with iPhone XR, NOT compatible with other phone model, please confirm carefully before buying. Support wireless charging, which can be done directly without disassembling the phone case.
【Material】This phone case for iphone xr back cover case is made of soft TPU material, more durable that can be used for long time, smooth texture, but non-slip. Easy to remove or install. The TPU case is light, so it doesn't burden you when you use your iphone xr.
【Perfect Compatible】The cute clear protective silicone phone case with sparkle bling, compatible with iPhone XR. It customized for your phone.
【Premium Material】This case is made of high quality silicone TPU material which is flexible and durable to use. And the bumper in the 4 corners can effectively reduce the impact of the phone when it is dropped. This non-slip case also provides a smooth and comfortable grip feeling.
【Perfect Compatible】The cute protective soft silicone phone case,customized for iPhone XR. It fits closely with your iPhone XR (6.1 inch).
【Precise Cutouts】Easy Access to All Buttons & Camera & Speakers & Connectors. Button openings are perfectly aligned for the iPhone XR. This slim case is precision designed to retain the stylish outlook of your new phone.
✨[Compatibility] This case is only compatible with iPhone XR, not with the other phone models. So please confirm it carefully before purchasing.
✨[Premium material] This phone case is made of high-quality liquid silicone, soft and flexible. You can easily install and remove the case without scratching the phone. It is also durable and can be used for a long time.
【Compatibility】This phone case is only designed for iPhone XR(6.1 inch). [NOT compatible with other model sizes.] Please check your phone model carefully before placing order.
【Heart Pattern with Lanyard】A simple hand-painted heart pattern on the phone case add a unique feeling to the phone case. And this phone case comes with a lanyard (adjustable), allows you to hang your phone on your body with the right length to prevent loss.
【Compatibility】Only Customized for iPhone XR. Please check your phone model before purchasing. Support wireless charging, which can be done directly without disassembling the phone case.
【High Quality Material】This cute phone case is made of premium high-grade soft TPU, and the frame of the phone case is more solidified with a layer of durable silicone. Bring a comfortable touch. The transparent back material will be harder, which can highlight the beauty of the phone.
[Compatibility] This case is only compatible for iPhone XR (6.1-inch) , not for the other models. So please confirm it before purchasing. And it supports wireless charging without removing the case.
[Stylish design] The combination of simple golden heart pattern and glitter shiny back cover make your phone look more luxurious, attractive and unique, suitable for girls and women.
【Compatibility】This shiny phone case is compatible with iPhone XR. Please confirm the model carefully before purchasing.
【Dazzling design 】Luxurious shiny plated mirror design with cute double heart pattern, elegant with a touch of cuteness, simple but distinctive, make your iPhone XR more fashionable and charming.
[Simple Art Design:] Irregular lines outline a vivid and incomplete human face, which is set off by other objects and colors, giving the phone case an artistic sense, and making your iPhone XR look full of literary and artistic atmosphere.
[Applicable models:] Only designed for iphone XR [NOT suitable to other models]. This phone case support wireless charging, needn’t take off the case when charging. The charging opening, headphone jack, volume button and mute button are precisely cut, easy to press, perfectly fit your phone.
【Compatible Models】This phone case is perfect compatible with iPhone XR [6.1 Inch screen], NOT compatible with other phone model. Support wireless charging without removing the case.
【Exquisite Design】The gold 3D butterfly scattered on the black case is so vivid and pretty .The high quality printing technology keeps it against fading and rubbing off in the daily use.