✅10Gbase-T Module: 10Gb/s SFP+ to RJ45 Ethernet Copper Transceiver,support links up to 30m (98 Ft) over Cat6a/ Cat7 cable. SFF-8431 and SFF-8432 MSA Compliant,IEEE 802.3az Compliant.
✅Wide Compatible: For Cisco SFP-10G-T-S, Meraki, MikroTik, Ubiquiti UF-RJ45-10G, Unifi, Fortinet, Netgear, TP-Link and Other Open Equipments with 10G SFP+ Port.
Wide Compatibility: Compatible for Cisco SFP-10G-T-S (NOT support on Cisco Nexus Series and Cisco Meraki Series), Ubiquiti UF-RJ45-10G, Netgear AXM765, D-Link DEM-440XT, TP-Link, Supermicro and Other Open Switches.
10G SFP+ to RJ45 Copper module for CAT6A/CAT7/CAT8 cable, copper RJ-45 connector. Supports 1000Mbps rate for using Cat 5e cable or better. (30 meters via 10Gbps, 50 meters via 5Gbps and 2.5Gbps, 100 meters via 1000Mbps.)
4 Pack 10GBase-SR SFP to LC Multi Mode Data Rate:10G; Wavelength: 850-nm Multi-Mode module; Port Type: LC/UPC; Reach: up to 300m using 50/125um Multi-Mode Fiber, Supports full-duplex Fiber Type: Dual LC OM3/OM4 multi-mode fiber.
Compatible with MSA compliant equipment from Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UF-MM-10G, Mikrotik, D-Link, Huawei, Netgear, Supermicro and More; CONNECTIVITY: 10G BASE-SX SFP transceiver for multimode fiber, 850 nm wavelength, supports up to 300m.
10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 0.5-meter, AWG30.It's a good alternative to fiber over short distances, with low-cost, low power consumption and low latency.
The 10G SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports (cannot be used in gigabit SFP ports) for Network Attached Storage, Storage Area Network, and High Performance Computing.
10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 0.5-meter, AWG30.It's a good alternative to fiber over short distances, with low-cost, low power consumption and low latency.
The 10G SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports (cannot be used in gigabit SFP ports) for Network Attached Storage, Storage Area Network, and High Performance Computing.
📡 Features - 10Gb SFP to SFP Cable, DAC Twinax Cable, 0.5Meter(1.6ft) = 1*Twinax Cable + 2*SFP+ Connectors, Passive, AWG30. Come with Dust Cover on Each End, and Anti-static Packaging
📡 Cost Saving and Improvement - A SFP DAC Cable is equal to 2*10G sfp+ optical modules plus an optical fiber patch cord, helping save your budget in short reach environment and improve the stability and durability without interface exposed and repeated plug and removal.
Wide Compatible: 10Gb SFP+ to SFP+ Direct Attach Copper Twinax Cable, Passive, 2-meter, AWG30. Widely compatible for Cisco, Ubiquiti, D-link, Netgear, Mikrotik, other Open Switch, etc devices.
Application: 10G SFP+ DAC Twinax Cable date rate is 10gbs, can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network, and High Performance Computing.
10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 2-Meter(6.5ft), 30AWG.
10G SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network, and High-Performance Computing.
Data Rate: 1000mbs/2.5G/5G/10G, Interface; RJ-45 connector. SFP to RJ45 copper module supports 1000Mbps rate for using Cat 5e cable or better. (30 meters via 10Gbps, 50 meters via 5Gbps and 2.5Gbps, 100 meters via 1000Mbps.) Notes: The sfp port of our product needs to perform rate conversion under the 10G port. One end is always a 10G port, and the other end can be a 10G/5G/2.5G/1G port.
Lower Power Dissipation: This SFP+ to RJ45 module Less than 2.5W power dissipation and heat-conducting gasket provide superior heat dissipation function to increases its service life, and save costs wisely.
✅10Gbase-T Module: 10Gb/s SFP+ to RJ45 Ethernet Copper Transceiver,support links up to 30m (98 Ft) over Cat6a/ Cat7 cable. SFF-8431 and SFF-8432 MSA Compliant,IEEE 802.3az Compliant.
✅Wide Compatible: For Cisco SFP-10G-T-S, Meraki, MikroTik, Ubiquiti UF-RJ45-10G, Unifi, Fortinet, Netgear, TP-Link and Other Open Equipments with 10G SFP+ Port.
📡High Rated OS2 9/125μm Fiber and Cladding, which is Insensitive to bending,Easy peeling,Easy welding,ensures small optical loss and stable transmission. The core is Japan imports zirconia powder ceramics, which is High Return Loss,Low Insertion Loss,Low Attenuation feautures
📡This LC to LC Single-mode Duplex OS2 fiber patch cords operate at -20ºC to +70ºC.Compatible with all standard fibre optic equipment and connectors,They are suitable for indoor use, if you need outdoor fiber, please send us an email.
✔[OS2 LC-LC Single Mode Duplex Fiber Patch Cable 1ft/3m] RamboCables Fiber Optic Patch Cords LC to LC Single Mode Duplex constructed with LC/UPC to LC/UPC connector, 9/125μm high rated fiber cladding, 1310/1550nm wavelength, environmentally friendly LSZH Jacket and 2.0mm Cable Diameter.
✔[Wide Application] This OS2 LC-LC Single Mode Duplex Fiber Patch Cord is ideal for connecting 10G SR, 40G BIDI SR, QSFP+, SFP+ transceivers etc, suitable for 1G/10G/40G/100G/400G Ethernet connections, saves more space for your high density cabling in data centers, cloud storage networks, server farms, computer room wiring, community network construction and any places fiber optic cables are necessary.
Wide Usage: Backward Compatible with 50/125 fiber cables for connecting SFP+ transceivers etc, Mini GBIC 10G SR, 10G LR. Ethernet switches, media converters, industrial Ethernet devices, and optical fiber NIC's. Even Support 40G/100G Ethernet connections and is the preferred fiber specification for 10G Ethernet connections.
Premium Material: Adopt high quality flame-retardant outer skin can prevent flame spread, smoke, acid gas and poisonous gas, and meet the needs of 10gb/s transmission rate; in the 10Gb/s Ethernet using 850nm VCSEL, the optical fiber transmission distance can reach 300m.
Please check the size chart in our details before buying. In order to ensure a suitable size, we usually recommend choosing a larger size, because the child is growing fast and our products are also very durable
The product is made of 75% cotton, healthy,comfortable and breathable, suitable for children's skin
¡ô HIGH QUALITY MATERIAL -Flexible and Environmentally friendly PVC/ LSZH plastic cover, PBT plastic connetor,excellent Corning glass core,imported ceramic connectors ensure low signal loss, and high reliability.( the usage count is more than 1,000 times) .
Fiber Patch Cables are accessories for mechanical equipment connection, optical fiber LAN, instrumentation, optical fiber into the home, optical fiber room distribution, etc.
Fiber Optic Cable ,is in size of:Wire diameter:3MM(0.11 inch);Cable Length:0.5m(19.68 inch);Grade :OM3;Connector Type:LC-LC;Color : Green;Sheath Material : LSZH;Core :Multimode double core;In the package of : 1 x Fiber Patch Cable