Rycote
7-4 of 160 results

URSA Plush Circles - 5mm length short fur LAV covers. Reusable & Super Soft. 25mm Diameter (9x, MultiPack)

• Plush Circles are a brand new 5mm length short fur LAV covers
• Designed for use under costumes to help disguise mics, reduce clothing noise and protect the mic from light wind.

RØDE LAV-CLIP Pack of 3 Lav Clips for Lavalier Microphone

• The LAV-CLIP is an ergonomic and discreet mounting clip for RØDE lavalier microphones. The LAV-CLIP is supplied in a pack of three.
• Ergonomic and discreet lavalier mounting clip

Rycote 065514 Universal Lavalier Windjammer for Microphone - Black

• Industry-leading wind noise reduction for lavalier mics
• Must-have for recording outdoor interviews or dialogue

Cubilux Foam Cover for lavalier Lapel Microphone, Windscreen for Mini Clip-On Lav MIC, 10-Pack

• [10-Pack Foam Wind Muff] – Minimize ambient noise, breathing and plosive sounds to remain clean and transparent audio quality.
• [Ideal for Indoor] – The foam cover works best for absorb ambient noise and pop sounds. Suitable for vlog, on-line meeting, singing, proacting or interview.

Rycote 065501 Windjammer for Lavalier - Black (Pack of 2)

• Industry-leading wind noise reduction for lavalier mics
• Must-have for recording outdoor interviews or dialogue

URSA Foamies: Soft Foam Mounts for Wireless Lav Mics. Can be stuck directly to the skin or costume. Fits SANKEN COS11, SENNHEISER MKE2, RODE LAV, DPA 4060/4070 (Pack of 12) (White)

• Compatible with microphones that measure 3-6mm diameter. These include COS11s, DPA 4060, 4071, ME2/MKE2, RODE Lav, Tascam TM-10L, Countryman B3 & many more
• Can be rigged onto aerial tips to help reduce RF loss

RØDE WS-LAV Windshield for Lavalier Foam Windshield for Lavalier, Lavalier GO and RØDELink LAV microphones, Black

• The WS-LAV is a high-quality foam windshield that is designed to fit the Lavalier, Lavalier GO and RØDELink LAV microphones. It helps prevent wind noise and hard plosive sounds overloading the microphone capsule. The WS-LAV is supplied in a pack of three. Note the WS-LAV is not compatible with the Lavalier ME.
• High-quality foam windshield for RØDE lavalier microphones

URSA Fur Circles - Mini Windshields for Lavalier/Lapel Microphones. Reduce Wind Noise & Clothing Rustle. Compatible with Sennheiser, RODE, Sanken, Tascam & More (9x, Brown)

• Fur Circles are designed to be used under clothing to reduce wind noise and clothing rustle.
• Our Wind Jammers are compatible with all major brands such as Sennheiser, RODE, Sanken, GoPro, Tascam, DPA & More

Rycote 065509 Replacement Stickies for Lavalier Microphone (Pack of 25, 30 per Pack), Natural

• Double-sided pads for placing lavalier microphones on top of clothing or discreetly on skin
• Simple peel-off and stick-on design

Rycote 065556 Windjammer for Ristretto Lavalier - Grey

• Industry-leading wind noise reduction for lavalier mics
• Ideal for on camera use, with very low profile for easy concealment

URSA Plush Circles - 5mm length short fur LAV covers. Reusable & Super Soft. 25mm Diameter (9x, MultiPack)

• Plush Circles are a brand new 5mm length short fur LAV covers
• Designed for use under costumes to help disguise mics, reduce clothing noise and protect the mic from light wind.

RØDE LAV-CLIP Pack of 3 Lav Clips for Lavalier Microphone

• The LAV-CLIP is an ergonomic and discreet mounting clip for RØDE lavalier microphones. The LAV-CLIP is supplied in a pack of three.
• Ergonomic and discreet lavalier mounting clip

Rycote 065514 Universal Lavalier Windjammer for Microphone - Black

• Industry-leading wind noise reduction for lavalier mics
• Must-have for recording outdoor interviews or dialogue

Cubilux Foam Cover for lavalier Lapel Microphone, Windscreen for Mini Clip-On Lav MIC, 10-Pack

• [10-Pack Foam Wind Muff] – Minimize ambient noise, breathing and plosive sounds to remain clean and transparent audio quality.
• [Ideal for Indoor] – The foam cover works best for absorb ambient noise and pop sounds. Suitable for vlog, on-line meeting, singing, proacting or interview.

Rycote 065501 Windjammer for Lavalier - Black (Pack of 2)

• Industry-leading wind noise reduction for lavalier mics
• Must-have for recording outdoor interviews or dialogue

URSA Foamies: Soft Foam Mounts for Wireless Lav Mics. Can be stuck directly to the skin or costume. Fits SANKEN COS11, SENNHEISER MKE2, RODE LAV, DPA 4060/4070 (Pack of 12) (White)

• Compatible with microphones that measure 3-6mm diameter. These include COS11s, DPA 4060, 4071, ME2/MKE2, RODE Lav, Tascam TM-10L, Countryman B3 & many more
• Can be rigged onto aerial tips to help reduce RF loss

RØDE WS-LAV Windshield for Lavalier Foam Windshield for Lavalier, Lavalier GO and RØDELink LAV microphones, Black

• The WS-LAV is a high-quality foam windshield that is designed to fit the Lavalier, Lavalier GO and RØDELink LAV microphones. It helps prevent wind noise and hard plosive sounds overloading the microphone capsule. The WS-LAV is supplied in a pack of three. Note the WS-LAV is not compatible with the Lavalier ME.
• High-quality foam windshield for RØDE lavalier microphones

URSA Fur Circles - Mini Windshields for Lavalier/Lapel Microphones. Reduce Wind Noise & Clothing Rustle. Compatible with Sennheiser, RODE, Sanken, Tascam & More (9x, Brown)

• Fur Circles are designed to be used under clothing to reduce wind noise and clothing rustle.
• Our Wind Jammers are compatible with all major brands such as Sennheiser, RODE, Sanken, GoPro, Tascam, DPA & More

Rycote 065509 Replacement Stickies for Lavalier Microphone (Pack of 25, 30 per Pack), Natural

• Double-sided pads for placing lavalier microphones on top of clothing or discreetly on skin
• Simple peel-off and stick-on design

Rycote 065556 Windjammer for Ristretto Lavalier - Grey

• Industry-leading wind noise reduction for lavalier mics
• Ideal for on camera use, with very low profile for easy concealment

URSA Plush Circles - 5mm length short fur LAV covers. Reusable & Super Soft. 25mm Diameter (9x, MultiPack)

• Plush Circles are a brand new 5mm length short fur LAV covers
• Designed for use under costumes to help disguise mics, reduce clothing noise and protect the mic from light wind.

RØDE LAV-CLIP Pack of 3 Lav Clips for Lavalier Microphone

• The LAV-CLIP is an ergonomic and discreet mounting clip for RØDE lavalier microphones. The LAV-CLIP is supplied in a pack of three.
• Ergonomic and discreet lavalier mounting clip

Rycote 065514 Universal Lavalier Windjammer for Microphone - Black

• Industry-leading wind noise reduction for lavalier mics
• Must-have for recording outdoor interviews or dialogue

Cubilux Foam Cover for lavalier Lapel Microphone, Windscreen for Mini Clip-On Lav MIC, 10-Pack

• [10-Pack Foam Wind Muff] – Minimize ambient noise, breathing and plosive sounds to remain clean and transparent audio quality.
• [Ideal for Indoor] – The foam cover works best for absorb ambient noise and pop sounds. Suitable for vlog, on-line meeting, singing, proacting or interview.

Rycote 065501 Windjammer for Lavalier - Black (Pack of 2)

• Industry-leading wind noise reduction for lavalier mics
• Must-have for recording outdoor interviews or dialogue

URSA Foamies: Soft Foam Mounts for Wireless Lav Mics. Can be stuck directly to the skin or costume. Fits SANKEN COS11, SENNHEISER MKE2, RODE LAV, DPA 4060/4070 (Pack of 12) (White)

• Compatible with microphones that measure 3-6mm diameter. These include COS11s, DPA 4060, 4071, ME2/MKE2, RODE Lav, Tascam TM-10L, Countryman B3 & many more
• Can be rigged onto aerial tips to help reduce RF loss

RØDE WS-LAV Windshield for Lavalier Foam Windshield for Lavalier, Lavalier GO and RØDELink LAV microphones, Black

• The WS-LAV is a high-quality foam windshield that is designed to fit the Lavalier, Lavalier GO and RØDELink LAV microphones. It helps prevent wind noise and hard plosive sounds overloading the microphone capsule. The WS-LAV is supplied in a pack of three. Note the WS-LAV is not compatible with the Lavalier ME.
• High-quality foam windshield for RØDE lavalier microphones

URSA Fur Circles - Mini Windshields for Lavalier/Lapel Microphones. Reduce Wind Noise & Clothing Rustle. Compatible with Sennheiser, RODE, Sanken, Tascam & More (9x, Brown)

• Fur Circles are designed to be used under clothing to reduce wind noise and clothing rustle.
• Our Wind Jammers are compatible with all major brands such as Sennheiser, RODE, Sanken, GoPro, Tascam, DPA & More

Rycote 065509 Replacement Stickies for Lavalier Microphone (Pack of 25, 30 per Pack), Natural

• Double-sided pads for placing lavalier microphones on top of clothing or discreetly on skin
• Simple peel-off and stick-on design

Rycote 065556 Windjammer for Ristretto Lavalier - Grey

• Industry-leading wind noise reduction for lavalier mics
• Ideal for on camera use, with very low profile for easy concealment

Rycote 044912 InVision Universal Microphone Shock Mount,Black

• Universal studio microphone shock mount designed to securely hold larger, heavier Large Diaphragm Condenser (LDC) mics from 55 to 68mm in diameter
• Ideal for mics weighing up to 900g, including: Blue The Kiwi, CAD E350.

Rycote 044901 InVision Universal Microphone Shock Mount,Black

• Can securely hold a variety of industry-standard, Large Diaphragm Condenser (LDC) mics 18mm to 55mm in diameter
• Up to twice the isolation of traditional microphone suspension systems

Rycote InVision USM VB-L shock mount

Rycote InVision USM VB-L Studio Kit

Rycote 045002 InVision USM Studio Kit,Black

• Universal studio microphone shock mount designed to securely hold Large Diaphragm Condenser (LDC) mics from 18 to 55mm in diameter
• Comes with microphone suspension and pop filter kit

Rycote 044903 InVision Universal Microphone Shock Mount for Large Mic, Black

• Universal studio microphone shock mount designed to securely hold lighter Large Diaphragm Condenser (LDC) mics from 18 to 55mm in diameter
• Ideal for mics weighing 400g or less, including: AKG C414, Neumann TLM 102 & 103.

Rycote 045005 InVision USM-VB Studio Kit, Black

• Universal studio microphone shock mount designed to securely hold larger, heavier Large Diaphragm Condenser (LDC) mics from 55 to 68mm in diameter
• Ideal for mics weighing up to 900g, including: Blue The Kiwi, CAD E350

Rycote 041126 InVision INV-7 Pop Filter Kit

• Kit comes complete with microphone suspension, custom Pop Filter mesh (which reduces low frequency plosives by up to 20dB), mounting bracket and adaptors to fit 3/8" and 5/8" thread mic stands
• Suspension consists of two 19-25mm universal clips mounted with 70mm (2.75") centres

Rycote 041107 INVision INV-7 Microphone Suspension , Black

• Discreet, low-profile microphone suspension design for use in TV, film and broadcast studio environments
• Single Lyre design supports small, pencil-type condenser mics optimally along the length of the mic body

Rycote 045003 InVision USM-L Studio Kit, Black

• Universal studio microphone shock mount designed to securely hold lighter Large Diaphragm Condenser (LDC) mics from 18 to 55mm in diameter
• Comes with microphone suspension and pop filter kit