Faster than before: Say goodbye to step loss and enjoy lower noise levels with the new closed-loop motor. With a maximum travel speed of 5000 mm/min, the PROVerXL 4030 V2 can complete projects quickly and efficiently, saving time and increasing productivity.
Upgraded Motion System: Enjoy increased precision and accuracy with the 1204 ball screws. The improved Z-axis structure provides added stability, while the added eccentric nut adjustment for the roller provides greater flexibility and control over the machine's movement.
The V2 is an upgraded version of one of our best selling Desktop CNC Machines, the 3018-PROVer. Class leading value has gotten even better and is easier than ever before to setup. With more pre-assembled accessories, it takes less than 20 minutes to assemble this 3018-PROVer V2 CNC machine. A real entry-level CNC for anyone who wants to learn a new skill, work on an artwork project, design a DIY gift, or start a small business.
Still based on open-source Grbl v1.1, the 3018-PROVer V2 CNC has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. More extended function ports were added, such as the 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port. It also supports updating the firmware through an SD card.
✅Full Room Layout Laser Level: Firecore F94T-XG self-leveling laser level projects three 360° planes including one horizontal plane and two vertical planes for precise and fast aligning, leveling, plumbing and squaring, allowing you to easily layout large spaces with one tool. Applications include setting out drywall tracks on floors, walls, ceilings, leveling electric sockets, cable trays, pipe installations, drop-ceiling installations and window framing.
✅High Visibility & Outdoor Pulse Mode: This green laser level projects green beams up to 4X brighter than standard red beams with the same power. This gives the tool a working range of up to 25m. and an accurate +/-3mm at 10m. Besides highly visible lines, an outdoor Pulse mode extends the laser working range up to 50m. with a Firecore FD20 line laser detector in bright lighting or outdoor conditions. Class II laser product (IEC/EN60825-1/2014),
3 X 360° ALL-ROUND LAYOUT: The green laser F95T-3G of Firecore projects 1 x 360° horizontal line and 2 x 360° vertical line, covering the entire house, making the layout easier to maneuver.
DIGITAL DISPLAY: The laser has a screen, and the intuitive display makes the laser line operation more convenient. Processes can be displayed and errors reported on the screen, e.g. B. Messages about self-leveling above ±4°, receiver connection, brightness adjustment and manual mode, etc.
Professional for large view Measurement: The MiLESEEY S7 is a professional measuring tool for large views, with an impressive range of up to 330ft and accuracy of up to +/- 1/16". Crafted for complex jobsites, it features a rugged housing, portability, and lightweight design, ideal for engineers needing precise measurements in busy environments.
2.4”color IPS display: Equipped with a vibrant 2.4" color IPS display, the S7 laser measure delivers stunning images and comfortable colors. With its large IPS display backlit display, you are assured that you will get a clear readout of the measurements even in the sunlight.
【3 MODES】1.Self-leveling mode - automatic leveling within 3 degrees, acoustic warning when exceeding 3 degrees. 2. Oblique line mode: position the laser tool at any angle to tilt the straight line to facilitate the use of stairs and other aspects. 3. Pulse mode allows you to use the spirit level with common detectors in a brighter environment or with a longer working distance. 4. Support remote operation.
【SPECIFICATION】Self-adjustment range: ± 2.5º; Measuring range: 40 m; Leveling accuracy: ± 0.2 mm / m; Automatic leveling range: ± 4; Leveling time:
Silent Setting: The laser distance finder's silent setting allows you to turn measurements on or off at will for libraries, classrooms and other quiet places.
Usage Scenarios: The laser distance measure is ideal for home, construction and industry, such as in apartments, buildings, factories, warehouses and other large areas.
3 X 360° LASER LAYOUT: The self-leveling F94T-XG reticle laser projects three 360° planes, including one 360° horizontal and two 360° vertical planes, for precise and fast alignment, leveling and pipe laying.
±3MM/10M ACCURACY: The green laser is four times more visible than the red laser and has a maximum working range of up to 30m. The pulsed mode extends the laser receiving range to 50m. (Recommended for FD20 receiver ASIN: B07FVMGGYL)
The 3018-PROVer CNC Roouter is just a start. If you're looking for an even larger machine, get the Y-axis expansion kit. Expand your machine with an optional sturdy aluminum spindle holder or powerful laser modules. You can find more accessories at our Amazon store.
The SainSmart 3018-PROVer is the latest version of the 3018 Desktop CNC DIY Kit Series. Now Pre-assembled and no fuss with assembly taking less than 15 minutes out of the box.
The V2 is an upgraded version of one of our best selling Desktop CNC Machines, the 3018-PROVer. Class leading value has gotten even better and is easier than ever before to setup. With more pre-assembled accessories, it takes less than 20 minutes to assemble this 3018-PROVer V2 CNC machine. A real entry-level CNC for anyone who wants to learn a new skill, work on an artwork project, design a DIY gift, or start a small business.
Still based on open-source Grbl v1.1, the 3018-PROVer V2 CNC has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. More extended function ports were added, such as the 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port. It also supports updating the firmware through an SD card.
✅Full Room Layout Laser Level: Firecore F94T-XG self-leveling laser level projects three 360° planes including one horizontal plane and two vertical planes for precise and fast aligning, leveling, plumbing and squaring, allowing you to easily layout large spaces with one tool. Applications include setting out drywall tracks on floors, walls, ceilings, leveling electric sockets, cable trays, pipe installations, drop-ceiling installations and window framing.
✅High Visibility & Outdoor Pulse Mode: This green laser level projects green beams up to 4X brighter than standard red beams with the same power. This gives the tool a working range of up to 25m. and an accurate +/-3mm at 10m. Besides highly visible lines, an outdoor Pulse mode extends the laser working range up to 50m. with a Firecore FD20 line laser detector in bright lighting or outdoor conditions. Class II laser product (IEC/EN60825-1/2014),
3 X 360° ALL-ROUND LAYOUT: The green laser F95T-3G of Firecore projects 1 x 360° horizontal line and 2 x 360° vertical line, covering the entire house, making the layout easier to maneuver.
DIGITAL DISPLAY: The laser has a screen, and the intuitive display makes the laser line operation more convenient. Processes can be displayed and errors reported on the screen, e.g. B. Messages about self-leveling above ±4°, receiver connection, brightness adjustment and manual mode, etc.
Professional for large view Measurement: The MiLESEEY S7 is a professional measuring tool for large views, with an impressive range of up to 330ft and accuracy of up to +/- 1/16". Crafted for complex jobsites, it features a rugged housing, portability, and lightweight design, ideal for engineers needing precise measurements in busy environments.
2.4”color IPS display: Equipped with a vibrant 2.4" color IPS display, the S7 laser measure delivers stunning images and comfortable colors. With its large IPS display backlit display, you are assured that you will get a clear readout of the measurements even in the sunlight.
【3 MODES】1.Self-leveling mode - automatic leveling within 3 degrees, acoustic warning when exceeding 3 degrees. 2. Oblique line mode: position the laser tool at any angle to tilt the straight line to facilitate the use of stairs and other aspects. 3. Pulse mode allows you to use the spirit level with common detectors in a brighter environment or with a longer working distance. 4. Support remote operation.
【SPECIFICATION】Self-adjustment range: ± 2.5º; Measuring range: 40 m; Leveling accuracy: ± 0.2 mm / m; Automatic leveling range: ± 4; Leveling time:
Silent Setting: The laser distance finder's silent setting allows you to turn measurements on or off at will for libraries, classrooms and other quiet places.
Usage Scenarios: The laser distance measure is ideal for home, construction and industry, such as in apartments, buildings, factories, warehouses and other large areas.
3 X 360° LASER LAYOUT: The self-leveling F94T-XG reticle laser projects three 360° planes, including one 360° horizontal and two 360° vertical planes, for precise and fast alignment, leveling and pipe laying.
±3MM/10M ACCURACY: The green laser is four times more visible than the red laser and has a maximum working range of up to 30m. The pulsed mode extends the laser receiving range to 50m. (Recommended for FD20 receiver ASIN: B07FVMGGYL)
The 3018-PROVer CNC Roouter is just a start. If you're looking for an even larger machine, get the Y-axis expansion kit. Expand your machine with an optional sturdy aluminum spindle holder or powerful laser modules. You can find more accessories at our Amazon store.
The SainSmart 3018-PROVer is the latest version of the 3018 Desktop CNC DIY Kit Series. Now Pre-assembled and no fuss with assembly taking less than 15 minutes out of the box.
The V2 is an upgraded version of one of our best selling Desktop CNC Machines, the 3018-PROVer. Class leading value has gotten even better and is easier than ever before to setup. With more pre-assembled accessories, it takes less than 20 minutes to assemble this 3018-PROVer V2 CNC machine. A real entry-level CNC for anyone who wants to learn a new skill, work on an artwork project, design a DIY gift, or start a small business.
Still based on open-source Grbl v1.1, the 3018-PROVer V2 CNC has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. More extended function ports were added, such as the 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port. It also supports updating the firmware through an SD card.
The V2 is an upgraded version of one of our best selling Desktop CNC Machines, the 3018-PROVer. Class leading value has gotten even better and is easier than ever before to setup. With more pre-assembled accessories, it takes less than 20 minutes to assemble this 3018-PROVer V2 CNC machine. A real entry-level CNC for anyone who wants to learn a new skill, work on an artwork project, design a DIY gift, or start a small business.
Still based on open-source Grbl v1.1, the 3018-PROVer V2 CNC has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. More extended function ports were added, such as the 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port. It also supports updating the firmware through an SD card.
The 3018-PROVer CNC Roouter is just a start. If you're looking for an even larger machine, get the Y-axis expansion kit. Expand your machine with an optional sturdy aluminum spindle holder or powerful laser modules. You can find more accessories at our Amazon store.
The SainSmart 3018-PROVer is the latest version of the 3018 Desktop CNC DIY Kit Series. Now Pre-assembled and no fuss with assembly taking less than 15 minutes out of the box.
New Version: Genmitsu CNC 3018-PRO is an upgraded version of 3018. With an integrated mainboard and custom software, communication between the software and hardware is seamless by design. 3018-PRO offers a large work surface of 300 x 180 mm x 45 mm. Spindle: 775 motor, 24V, 10000 RPM.
Built to suit your needs: If you are an experienced CNC engraving enthusiast looking for an upgrade, you can add the laser module kit to the machine. Or if you need extra working room you can add the Y-Extension and expand your work area. If you need to work with harder materials, upgrade your Z-Axis with the new all-metal carrier for larger 300W spindles.
Easy to Set Up: The pre-assembled module of XYZ axis and wires dramatically reduces effort of assembly, allowing you to start carving your projects in less time.
More Power: All new completely redesigned control box and drive system, beefy C-BEAM Frame, precision NEMA 23 stepper motors, High Power Spindle and included adapter for a drop in Dewalt DWP611 upgrade.
An effective working area of 400 x 400 x 78mm is large enough for most daily CNC projects. The redesigned Z-axis carriage makes swapping a spindle easier. Adding more screw holes on the non-all-in-one Z-axis carriage allows you to install the larger spindle higher for extra overfeed height.
New Steel HSS Frame - all new redesigned frame structure, each axis is composed of two 16mm Steel HSS linear tubes and a lead screw motion drive, dual Y axis rails, and all metal frame. This new high-rigidity structure ensures the stability and accuracy of the CNC machine.
➢Compatible with Genmitsu CNC milling / engraving machine 3018-PROVer V2 and 4040-PRO.
➢With just one click, CNC milling / engraving machines automatically return to a pre-defined starting position, so you can easily change and adjust your machining tools.
This controller board is compatible with Genmitsu CNC 3018-PROVer, but if you purchase the Genmitsu 3018-MX3 and you don't want to use Mach3 Software, you can change into this controller board.
Applicable Software: Grblcontrol (Candle), LaserGRBL or other software that supports GRBL firmware, GRBL firmware version V1.1f.