Sparkfun
3-10 of 400 results

3 pack ESP32 ESP-32S Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-In-1 Microcontroller ESP-WROOM-32 Chip CP2102 for Arduino (3PCS)

• 2.4GHz Dual Mode WiFi + Bluetooth Development Board
• Support LWIP protocol, Freertos

DollaTek ESP32-S3-DevKitC-1 ESP32-S3 WiFi Bluetooth-compatible BLE 5.0 Mesh Development Board ESP32 Wireless Module

• ESP32-S3 is a MCU chip integrated with 2.4 GHz Wi Fi and Bluetooth 5(LE), which supports Long Range mode.
• The ESP32 -S3 is equipped with 32 bit LX7 dual core processor, with the main frequency up to 240 MHz, built-in 512 KB SRAM (TCM), 45 programmable GPIO pins and rich communication interfaces.

SparkFun Electronics IoT RedBoard - ESP32 Development Board

• The SparkFun IoT RedBoard is an ESP32 Development Board that includes everything but the kitchen sink!
• They've included 3.3V voltage translation and a Qwiic connector to the edge of the board to allow for quick and seamless connection to our ever-growing line of I2C based Qwiic products.

SparkFun ESP32 Thing Plus DMX to LED Shield

• The perfect way to send and receive DMX data
• Get started developing your own custom DMX fixtures, or even adding ArtNet capabilities

DEV-14430 SparkFun ESP32 Thing Motion Shield/UK

SparkFun Thing Plus ESP32 WROOM

• Xtensa dual-core 32-bit LX6 microprocessor Up to 240MHz clock frequency
• 16MB of flash storage 520kB internal SRAM

SparkFun Thing Plus - ESP32-S2 WROOM

SparkFun ESP32 Thing Development Workshop

Diymore ESP32 Development Board WIFI Kit 32 ESP32 WIFI Wireless with 0.96 inch OLED Display CP2102 Type C

• Microprocessor: ESP32-S3FN8 (32-bit LX7 dual-core processor, five-stage pipeline rack Structure, main frequency up to 240 MHz)
• Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures;Onboard SH1.25-2 battery interface

DollaTek ESP32-C3 Development Board WiFi+Bluetooth 5.0 Equipped With ESP32-C3-MINI-1 ESP32 Wifi Internet Of Things Module For Arduino

• ESP32C3-MINI-1 is a universal Wi-Fi and low-power Bluetooth dual module with powerful functions.
• The module adopts PCB onboard antenna and is equipped with 4MB SPI flash.

SparkFun Electronic Dice Kit

SparkFun Wheel Encoder Kit

• Supply Voltage: 3-24V
• Supply Current: 4mA per sensor

SparkFun Qwiic Alphanumeric Display Kit

• These fourteen-segment digits allow you to display all sorts of numbers, characters, and symbols. With Qwiic, simply plug it in and go. No soldering, no figuring out which is SDA or SCL, and no voltage regulation or translation required!
• With a wide variety of Qwiic enabled microcontroller boards available we decided not to include one so you could choose the one that fits best with your current project needs.

SparkFun Jetson Intermediate Kit with Battery Pack Imaging Camera 136 Degree FOV Two-in-one WiFi Adapter MicroSD Card 32GB with HDMI Cable 1m - Kit Does not Include a Jetson Nano

• SparkFun Jetson Nano Intermediate Kit with Battery Pack provides you with all of the essential parts needed to start new projects with your Jetson Nano.
• Kit does NOT Include a Jetson nanoThe Jetson Nano Developer Kit uses a microSD card as a boot device and for main storage. It’s important to have a card that’s not just fast but also large enough for all of your projects; the minimum recommended being a 32GB UHS-1 card.

SparkFun Weather Meter Kit

• Kit includes our tried-and-true Weather Meters and Soil Moisture Sensor. Build a high-grade weather station powered by the micro:bit.
• A great way to get your feet wet in high-grade sensors --- just not literally; that's the weather:bit's job!

SparkFun Jetson Intermediate Kit with Power Supply

SparkFun Electronics Ethernet Kit for Teensy 4.1

SparkFun WeevilEye - Beginner Soldering Kit

• 2 x Red LEDs
• 1 x 47k Ohm Resistor

SparkFun IoT RedBoard Kit -ESP32-D0WDQ6 Qwiic Connect System High Precision Temperature Sensor Operating Voltage:1.8V to 5.5V

• The SparkFun IoT RedBoard Kit is intended to provide you with everything you need to get up and running with the IoT RedBoard - ESP32.
• SparkFun loT Redboard includes: 1x SparkFun IoT RedBoard - ESP32. 1x SparkFun High Precision Temperature Sensor - TMP117. 1x Qwiic Cable - 100mm. 1x Reversible USB A to C Cable - 0.3m. 1x microSD Card - 1GB (Class 4)

SparkFun Basic Flashlight Soldering Kit

• This Flashlight Soldering Kit is an easy to assemble soldering kit designed to help teach the basics of through hole soldering.
• This kit requires you to only solder four unique parts onto a PCB.

SparkFun Electronic Dice Kit

SparkFun Wheel Encoder Kit

• Supply Voltage: 3-24V
• Supply Current: 4mA per sensor

SparkFun Qwiic Alphanumeric Display Kit

• These fourteen-segment digits allow you to display all sorts of numbers, characters, and symbols. With Qwiic, simply plug it in and go. No soldering, no figuring out which is SDA or SCL, and no voltage regulation or translation required!
• With a wide variety of Qwiic enabled microcontroller boards available we decided not to include one so you could choose the one that fits best with your current project needs.

SparkFun Jetson Intermediate Kit with Battery Pack Imaging Camera 136 Degree FOV Two-in-one WiFi Adapter MicroSD Card 32GB with HDMI Cable 1m - Kit Does not Include a Jetson Nano

• SparkFun Jetson Nano Intermediate Kit with Battery Pack provides you with all of the essential parts needed to start new projects with your Jetson Nano.
• Kit does NOT Include a Jetson nanoThe Jetson Nano Developer Kit uses a microSD card as a boot device and for main storage. It’s important to have a card that’s not just fast but also large enough for all of your projects; the minimum recommended being a 32GB UHS-1 card.

SparkFun Weather Meter Kit

• Kit includes our tried-and-true Weather Meters and Soil Moisture Sensor. Build a high-grade weather station powered by the micro:bit.
• A great way to get your feet wet in high-grade sensors --- just not literally; that's the weather:bit's job!

SparkFun Jetson Intermediate Kit with Power Supply

SparkFun Electronics Ethernet Kit for Teensy 4.1

SparkFun WeevilEye - Beginner Soldering Kit

• 2 x Red LEDs
• 1 x 47k Ohm Resistor

SparkFun IoT RedBoard Kit -ESP32-D0WDQ6 Qwiic Connect System High Precision Temperature Sensor Operating Voltage:1.8V to 5.5V

• The SparkFun IoT RedBoard Kit is intended to provide you with everything you need to get up and running with the IoT RedBoard - ESP32.
• SparkFun loT Redboard includes: 1x SparkFun IoT RedBoard - ESP32. 1x SparkFun High Precision Temperature Sensor - TMP117. 1x Qwiic Cable - 100mm. 1x Reversible USB A to C Cable - 0.3m. 1x microSD Card - 1GB (Class 4)

SparkFun Basic Flashlight Soldering Kit

• This Flashlight Soldering Kit is an easy to assemble soldering kit designed to help teach the basics of through hole soldering.
• This kit requires you to only solder four unique parts onto a PCB.

SparkFun Electronic Dice Kit

SparkFun Wheel Encoder Kit

• Supply Voltage: 3-24V
• Supply Current: 4mA per sensor

SparkFun Qwiic Alphanumeric Display Kit

• These fourteen-segment digits allow you to display all sorts of numbers, characters, and symbols. With Qwiic, simply plug it in and go. No soldering, no figuring out which is SDA or SCL, and no voltage regulation or translation required!
• With a wide variety of Qwiic enabled microcontroller boards available we decided not to include one so you could choose the one that fits best with your current project needs.

SparkFun Jetson Intermediate Kit with Battery Pack Imaging Camera 136 Degree FOV Two-in-one WiFi Adapter MicroSD Card 32GB with HDMI Cable 1m - Kit Does not Include a Jetson Nano

• SparkFun Jetson Nano Intermediate Kit with Battery Pack provides you with all of the essential parts needed to start new projects with your Jetson Nano.
• Kit does NOT Include a Jetson nanoThe Jetson Nano Developer Kit uses a microSD card as a boot device and for main storage. It’s important to have a card that’s not just fast but also large enough for all of your projects; the minimum recommended being a 32GB UHS-1 card.

SparkFun Weather Meter Kit

• Kit includes our tried-and-true Weather Meters and Soil Moisture Sensor. Build a high-grade weather station powered by the micro:bit.
• A great way to get your feet wet in high-grade sensors --- just not literally; that's the weather:bit's job!

SparkFun Jetson Intermediate Kit with Power Supply

SparkFun Electronics Ethernet Kit for Teensy 4.1

SparkFun WeevilEye - Beginner Soldering Kit

• 2 x Red LEDs
• 1 x 47k Ohm Resistor

SparkFun IoT RedBoard Kit -ESP32-D0WDQ6 Qwiic Connect System High Precision Temperature Sensor Operating Voltage:1.8V to 5.5V

• The SparkFun IoT RedBoard Kit is intended to provide you with everything you need to get up and running with the IoT RedBoard - ESP32.
• SparkFun loT Redboard includes: 1x SparkFun IoT RedBoard - ESP32. 1x SparkFun High Precision Temperature Sensor - TMP117. 1x Qwiic Cable - 100mm. 1x Reversible USB A to C Cable - 0.3m. 1x microSD Card - 1GB (Class 4)

SparkFun Basic Flashlight Soldering Kit

• This Flashlight Soldering Kit is an easy to assemble soldering kit designed to help teach the basics of through hole soldering.
• This kit requires you to only solder four unique parts onto a PCB.