Car FM Transmitters
1-2 of 80 results

DC12-36V 12 Channel PLC Amplifier Board,PLC Signal Amplifier Board,Isolation Relay Module,NPN Input PNP Output,Drilling,PCB Module Rack Installation

• PROTECT: Can be used to protect PLC internal relays;Effectively protected the output nodes of the PLC.
• EFFECTIVELY AVOID: Effectively avoid system instability caused by mutual interference.

Mopar Cover Isolator - 4884763AA

• Mopar Cover Isolator - 4884763AA

ISOLATED ERROR AMPLIFIER, 400KHZ, WSOIC, Isolation Amplifiers ICs (ADUM4190BRIZ) Pack of 1

DC Signal Isolator, 2 in 4 Out Current Signal Transmitter Less Interference Photoelectric Isolation Shockproof for Circuit Protection (0-10V)

4‑Channel RS485 Hub Sharer Splitter Industrial Grade Photoelectric Isolation Repeater Amplifier Converter

• Data flow automatic control technology, automatically distinguish and control the data transmission direction.
• Built‑in DC/DC isolated power supply module to achieve electrical isolation between ports.

Transmitter, 1 in 1 Out High Accurate Signal Isolation, for Two-Wire Transmitters Three-Wire Transmitters(DC4-20mA Input)

• Product channels are configured as one in, one out.
• Top open debugging, easy to fine-tune during installation and debugging.

High-Frequency RF Logarithmic Detector Power Meter - 1M-10GHz Detection Range

• [HIGH POWER DETECTION] - This power meter can detect RF signal power within the range of -55dBm to -0dBm. It converts the RF signal into a DC voltage output, allowing for easy power measurement and analysis.
• [ACCURATE SIGNAL DETECTION] - Designed with the advanced AD8317 chip, this RF logarithmic detector accurately measures RF signal power. It operates in a frequency range of 1M to 10GHz, making it suitable for a wide range of applications.

Transmitter, 1 in 1 Out Signal Isolation, Current Source for Two-Wire Transmitters Three-Wire Transmitters Transmitters(DC4-20mA Input)

• Product channels are configured as one in, one out.
• High accurate and fast response time.

Transmitter, 1 in 1 Out High Accurate Signal Isolation, for Two-Wire Transmitters Three-Wire Transmitters(DC0-10V Input)

• Product channels are configured as one in, one out.
• Top open debugging, easy to fine-tune during installation and debugging.

Voltage Regulator Module, 1000W Manual Adjustment 220V Voltage Regulation Board for Load(RS485)

• AC VOLTAGE REGULATOR: This module is used for regulating AC voltage, with high power of 1000W, practical and effective.
• MULTI FUNCTION: This AC voltage regulation board is multifunctional, which can be used to control serial port dimming, speed and temperature.

DC12-36V 12 Channel PLC Amplifier Board,PLC Signal Amplifier Board,Isolation Relay Module,NPN Input PNP Output,Drilling,PCB Module Rack Installation

• PROTECT: Can be used to protect PLC internal relays;Effectively protected the output nodes of the PLC.
• EFFECTIVELY AVOID: Effectively avoid system instability caused by mutual interference.

Mopar Cover Isolator - 4884763AA

• Mopar Cover Isolator - 4884763AA

ISOLATED ERROR AMPLIFIER, 400KHZ, WSOIC, Isolation Amplifiers ICs (ADUM4190BRIZ) Pack of 1

DC Signal Isolator, 2 in 4 Out Current Signal Transmitter Less Interference Photoelectric Isolation Shockproof for Circuit Protection (0-10V)

4‑Channel RS485 Hub Sharer Splitter Industrial Grade Photoelectric Isolation Repeater Amplifier Converter

• Data flow automatic control technology, automatically distinguish and control the data transmission direction.
• Built‑in DC/DC isolated power supply module to achieve electrical isolation between ports.

Transmitter, 1 in 1 Out High Accurate Signal Isolation, for Two-Wire Transmitters Three-Wire Transmitters(DC4-20mA Input)

• Product channels are configured as one in, one out.
• Top open debugging, easy to fine-tune during installation and debugging.

High-Frequency RF Logarithmic Detector Power Meter - 1M-10GHz Detection Range

• [HIGH POWER DETECTION] - This power meter can detect RF signal power within the range of -55dBm to -0dBm. It converts the RF signal into a DC voltage output, allowing for easy power measurement and analysis.
• [ACCURATE SIGNAL DETECTION] - Designed with the advanced AD8317 chip, this RF logarithmic detector accurately measures RF signal power. It operates in a frequency range of 1M to 10GHz, making it suitable for a wide range of applications.

Transmitter, 1 in 1 Out Signal Isolation, Current Source for Two-Wire Transmitters Three-Wire Transmitters Transmitters(DC4-20mA Input)

• Product channels are configured as one in, one out.
• High accurate and fast response time.

Transmitter, 1 in 1 Out High Accurate Signal Isolation, for Two-Wire Transmitters Three-Wire Transmitters(DC0-10V Input)

• Product channels are configured as one in, one out.
• Top open debugging, easy to fine-tune during installation and debugging.

Voltage Regulator Module, 1000W Manual Adjustment 220V Voltage Regulation Board for Load(RS485)

• AC VOLTAGE REGULATOR: This module is used for regulating AC voltage, with high power of 1000W, practical and effective.
• MULTI FUNCTION: This AC voltage regulation board is multifunctional, which can be used to control serial port dimming, speed and temperature.

DC12-36V 12 Channel PLC Amplifier Board,PLC Signal Amplifier Board,Isolation Relay Module,NPN Input PNP Output,Drilling,PCB Module Rack Installation

• PROTECT: Can be used to protect PLC internal relays;Effectively protected the output nodes of the PLC.
• EFFECTIVELY AVOID: Effectively avoid system instability caused by mutual interference.

Mopar Cover Isolator - 4884763AA

• Mopar Cover Isolator - 4884763AA

ISOLATED ERROR AMPLIFIER, 400KHZ, WSOIC, Isolation Amplifiers ICs (ADUM4190BRIZ) Pack of 1

DC Signal Isolator, 2 in 4 Out Current Signal Transmitter Less Interference Photoelectric Isolation Shockproof for Circuit Protection (0-10V)

4‑Channel RS485 Hub Sharer Splitter Industrial Grade Photoelectric Isolation Repeater Amplifier Converter

• Data flow automatic control technology, automatically distinguish and control the data transmission direction.
• Built‑in DC/DC isolated power supply module to achieve electrical isolation between ports.

Transmitter, 1 in 1 Out High Accurate Signal Isolation, for Two-Wire Transmitters Three-Wire Transmitters(DC4-20mA Input)

• Product channels are configured as one in, one out.
• Top open debugging, easy to fine-tune during installation and debugging.

High-Frequency RF Logarithmic Detector Power Meter - 1M-10GHz Detection Range

• [HIGH POWER DETECTION] - This power meter can detect RF signal power within the range of -55dBm to -0dBm. It converts the RF signal into a DC voltage output, allowing for easy power measurement and analysis.
• [ACCURATE SIGNAL DETECTION] - Designed with the advanced AD8317 chip, this RF logarithmic detector accurately measures RF signal power. It operates in a frequency range of 1M to 10GHz, making it suitable for a wide range of applications.

Transmitter, 1 in 1 Out Signal Isolation, Current Source for Two-Wire Transmitters Three-Wire Transmitters Transmitters(DC4-20mA Input)

• Product channels are configured as one in, one out.
• High accurate and fast response time.

Transmitter, 1 in 1 Out High Accurate Signal Isolation, for Two-Wire Transmitters Three-Wire Transmitters(DC0-10V Input)

• Product channels are configured as one in, one out.
• Top open debugging, easy to fine-tune during installation and debugging.

Voltage Regulator Module, 1000W Manual Adjustment 220V Voltage Regulation Board for Load(RS485)

• AC VOLTAGE REGULATOR: This module is used for regulating AC voltage, with high power of 1000W, practical and effective.
• MULTI FUNCTION: This AC voltage regulation board is multifunctional, which can be used to control serial port dimming, speed and temperature.

MLRPGO Flysky FS-R4M 2.4GHz 4Ch ANT Protocol Single Antenna PWM Output RC Receiver for FS-G7P Transmitters Mini Micro RC Car

• FS-R4M based on ANT protocol is a 4-channel mini receiver with single external antenna, bidirectional transmission and micro size. It adapts micro/mini cars.
• Adaptive transmitters: Transmitters with ANT protocol, such as FS-G7P

Flysky FS-FGr4 V2 4CH 2.4Ghz AFHDS3 PPM IBUS Sbus Output Receiver for RC Car Truck Crawler Boat

• FGr4 adopts AFHDS 3, Flysky's third-generation automatic frequency hopping digital system. It uses a single-antenna bidirectional transmission system and is uniquely designed to save space and output standard PPM and i-BUS、S.BUS signals.
• 4 channel receiver is compatible with FlySky Noble FS-NB4 Transmitter RC Car Boat.

MLRPGO Flysky FS-iA6B 2.4Ghz 6 Channel Long Range Dual Pass PPM PWM Output and Telemetry with ibus Receiver for RC Car Boat

• This is a fantastic receiver for FlySky transmitters - it improves on the older FS-iA6 model by adding telemetry capability and PPM output. The pin orientation is 'end-on' for low profile wiring layouts and includes inputs for optional telemetry sensors
• The receiver's excellent range (reported at well over 1km) is thanks to its dual antennae which also help with fantastic interference rejection. This is a seriously capable receiver which is easily able to compete with far more expensive products available.

MLRPGO Flysky FS-SR12 12CH 2.4Ghz ANT Protocol PWM Output Receiver for FS-ST8 Fixed-Wing Aircraft Helicopters Gliders RC Boat Car

• FS-SR12 is a receiver in compliance with the ANT protocol, supporting the output of 12 PWM channels signals.
• It has two antennas, supporting two-way transmission, transfer-back function and BVD function, featuring the compact design, adaption to a variety of models

MLRPGO Skydroid OTG 5.8G 150CH UVC Dual Antenna Control Receiver FPV Receiver with Audio for Android Smartphone (Black)

• We believe that everyone has been entangled in the problem of digital image transmission simulation, then our product will tell a lot of people, it turns out that our simulation picture has just begun!
• The 5.8g receiver, traditionally transferred to the screen, is passed to the phone and can be passed to the screen at the same time. . Powered by mobile phone, simplify wiring and structure! ! Plus "FUAV" this app,reflecting vr flight! ! !

MLRPGO Flysky FGR8B IPX4 2.4GHz 8CH PWM PPM i-Bus Output Receiver for AFHDS 3 Transmitters RF Modules PL18 NB4 /NB4 Lite FRM302 RC Car Boat

• The FGr8B receiver adopts Flysky's third-generation automatic frequency hopping digital system (AFHDS 3).
• It uses a single-antenna bidirectional transmission system and is uniquely designed to install and output PWM/ PPM/ i-bus in signals.

MLRPGO Flysky FS-iA10B 10CH AFHDS2A PPM Output Receiver for FPV RC Airplane Glider Helicopter

• Flysky FS-iA10B 10CH RC Receiver PPM Output for FPV RC Heli Plane Quadcopter Drone Airplane
• Reliable, interference free 2.4GHz AFHDS signal operation.

MLRPGO Flysky FS-A8S 2.4G 8CH Mini Receiver with PPM i-Bus SBUS Output for FS-i4 FS-i6 FS-i6S RC Drone Quadcopter Spare Parts

• The FS-A8S is a compact one-way receiver. It is designed for multi-rotor aircraft. It uses the AFHDS 2A (Automatic Frequency Hopping Digital System) protocol, and supports standard PPM output as well as has i-BUS support for up to 18 channels.
• Easy to bind and very fast link-up, quick and extremely stable in performance.

MLRPGO Flysky FS-IA6 6CH Double Antenna RC Receiver PPM Output with iBus Port

• Compatible with FS-i6 remote controller;Bidirectional transmission.
• Reliable, interference free 2.4GHz AFHDS2A signal operation.

MLRPGO Flysky FS BS6 IPX4 Waterproof 2.4G 6CH Gyro Receiver for FS-GT5 FS-i6 FS-i6X Transmitter RC Car Boat

• Flysky BS6 Waterproof Receiver Can wade for a short time, If your car drives in water, no need to worry, Built-in gyroscope features automatic recovery of unexpected offsets, Small in size and light in weight, it can be installed inside the model at will without taking up space.
• Compatible with all ESCs, servos, and additional