The 10 colour repeat clear carrier colour coded 40 PIN ribbon cable, which can be separated into single wire or multi - strand combination for various usages.easy to identify each wires in your DIY or prototype.
Cable material: 12-core pure copper wire,premium quality and safe,saving space and weight.
Working voltage: 3.0-5.8V; Current: 0.18A. Air volume: 5m3 / h; Number of revolutions: 13200RPM. It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Upgrade bearing of this fan not only can make sure outputing a lot of wind,but also quiet enough.
3 sections large capacity blanket laundry baskets - Divided into 3 sections laundry hamper,so you can sort your dark, color from light as you drop clothing into the bags. Each laundry bag can hold up to 2 standard size loads of laundry.
SG90 is a high quality, cost effective servo for all your mechatronic requirements. It comes with a 3-pin power and control cable.
SG90 9G Micro Servo Motor for RC Helicopter, Micro Robot, Robot Arms and Boats Fit for all types of R/C toys and also make electronics DIY based on compatible with Arduino, Raspberry Pi
This version of the MCP2515 Breakout solves some of the board's problems. 120 ohm terminal resistors. With Impedance matching, ensures the drive capability, long distance data transmission prevents signal emission
High Power High Efficiency: Supports CAN V2.0B specification, the communication speed 1Mb/s. High reliability, strong vibration resistance, good electromechanical performance. 0 to 8-byte data field. With standard frame, expand the frame and remote frame.
Breadboard power supply module, for Ar-duino board solderless breadboard. The module provides dual 5V and 3.3V power rails, and has a multi-purpose female USB socket, convenient external lead use.
Input Voltage: DC 6.5-12V; Output Voltage: DC 3.3V 5V; Input do not exceed 700mA, Locking ON / OFF Switch, no need to unplug the power adapter, LED Power Indicator indicated when the board is powered up.
The 10 colour repeat clear carrier colour coded 40 PIN ribbon cable, which can be separated into single wire or multi - strand combination for various usages.easy to identify each wires in your DIY or prototype.
Cable material: 12-core pure copper wire,premium quality and safe,saving space and weight.
Working voltage: 3.0-5.8V; Current: 0.18A. Air volume: 5m3 / h; Number of revolutions: 13200RPM. It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Upgrade bearing of this fan not only can make sure outputing a lot of wind,but also quiet enough.
3 sections large capacity blanket laundry baskets - Divided into 3 sections laundry hamper,so you can sort your dark, color from light as you drop clothing into the bags. Each laundry bag can hold up to 2 standard size loads of laundry.
SG90 is a high quality, cost effective servo for all your mechatronic requirements. It comes with a 3-pin power and control cable.
SG90 9G Micro Servo Motor for RC Helicopter, Micro Robot, Robot Arms and Boats Fit for all types of R/C toys and also make electronics DIY based on compatible with Arduino, Raspberry Pi
This version of the MCP2515 Breakout solves some of the board's problems. 120 ohm terminal resistors. With Impedance matching, ensures the drive capability, long distance data transmission prevents signal emission
High Power High Efficiency: Supports CAN V2.0B specification, the communication speed 1Mb/s. High reliability, strong vibration resistance, good electromechanical performance. 0 to 8-byte data field. With standard frame, expand the frame and remote frame.
Breadboard power supply module, for Ar-duino board solderless breadboard. The module provides dual 5V and 3.3V power rails, and has a multi-purpose female USB socket, convenient external lead use.
Input Voltage: DC 6.5-12V; Output Voltage: DC 3.3V 5V; Input do not exceed 700mA, Locking ON / OFF Switch, no need to unplug the power adapter, LED Power Indicator indicated when the board is powered up.
Choose your favourite colour and quantity you want. Ideal for sending Christmas cards, greeting cards and invitation cards, but also for congratulations cards and thank you cards
Format: DIN long - size 220 x 110 mm (22 x 11 cm) - weight: 110 g/m² - adhesive with peel and seal strips
Format: square - 160 x 160 mm (16 x 16 cm) - with wet adhesive and rubber coating for moistening or inserting - classic dirty pointed flap (greeting card closure).
Choose your favourite colour and quantity – ideal for sending Christmas cards, greeting cards and invitation cards, but also for greeting cards and thank you cards
Cards: format: DIN A6 - size of final format (folded): 148 x 105 mm (14.8 x 10.5 cm) - size open (unfolded) 148 x 210 mm (14.8 x 21 cm) - weight: 220 g/m² - delivered unfolded
You have the choice: choose between your favourite colour and the quantity ideal for sending greeting cards and invitation cards, but also for greeting cards and thank you cards and as menu cards or menus
Colour: eucalyptus - matte surface with bright colours - fully coloured paper
Choose your favourite colour, type of adhesive and quantity. Ideal for handwritten letters and greetings for Christmas cards, birthdays, weddings, pen pals and very special messages.
Colour of paper and envelope: Natural white (slightly broken white) - surface matte and smooth, fully dyed paper with bright colours without fading.
Choose your favourite colour, type of adhesive and quantity. Ideal for handwritten letters and greetings for Christmas cards, birthdays, weddings, pen pals and very special messages.
Colour of paper and envelope: Kraft paper green (dark green), surface slightly natural, rough, natural, recycled kraft paper with fibre inclusions.
Choose between your favourite colour and the quantity - ideal as greeting cards and invitation cards, as well as for greeting cards and thank you cards - the envelopes and cards are in the same colour
Colour: royal blue / royal blue - weight: 120 g/m² - matte surface, pleasant feel and very dimensionally stable