Size - thread size: m10 x 1.5 ; thread length: 25mm / 0.98"shank side width: 6mm / 0.24" ; total length: 79mm / 3.11"
Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Size - thread size: m10 x 1.5 ; thread length: 24mm / 0.94"shank side width: 6mm / 0.24" ; total length: 80mm / 3.15"
Material - Spiral Flute Drill Tap is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and threads in a variety of materials.The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Size - thread size: m12 x 1.75 ; thread length: 30mm / 1.18"shank side width: 7mm / 0.28" ; total length: 88mm / 3.46"
Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The titanium nitride (TiN) coating provides increased hardness, wear resistance and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation.
Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Spiral Flute Taps: Thread Size: M4 x 0.7 + 0.1; Square End Size: 4mm / 0.16". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Tap Size: 4-40 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
Material and Finish: High speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection.
Tap Size: M6 x 1 thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
Material and Finish: Cobalt high speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection and long service life.
Spiral Flute Taps: Thread Size: M8 x 1.25 + 0.1; Square End Size: 5mm / 0.2". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Material - Spiral Flute Taps is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and high-quality threads in a variety of materials. The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The titanium nitride (TiN) coating provides increased hardness, wear resistance, and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation during the tapping process.
Size - thread size: m10 x 1.5 ; thread length: 25mm / 0.98"shank side width: 6mm / 0.24" ; total length: 79mm / 3.11"
Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Size - thread size: m10 x 1.5 ; thread length: 24mm / 0.94"shank side width: 6mm / 0.24" ; total length: 80mm / 3.15"
Material - Spiral Flute Drill Tap is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and threads in a variety of materials.The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Size - thread size: m12 x 1.75 ; thread length: 30mm / 1.18"shank side width: 7mm / 0.28" ; total length: 88mm / 3.46"
Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The titanium nitride (TiN) coating provides increased hardness, wear resistance and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation.
Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Spiral Flute Taps: Thread Size: M4 x 0.7 + 0.1; Square End Size: 4mm / 0.16". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Tap Size: 4-40 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
Material and Finish: High speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection.
Tap Size: M6 x 1 thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
Material and Finish: Cobalt high speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection and long service life.
Spiral Flute Taps: Thread Size: M8 x 1.25 + 0.1; Square End Size: 5mm / 0.2". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Material - Spiral Flute Taps is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and high-quality threads in a variety of materials. The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The titanium nitride (TiN) coating provides increased hardness, wear resistance, and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation during the tapping process.
Size - thread size: m10 x 1.5 ; thread length: 25mm / 0.98"shank side width: 6mm / 0.24" ; total length: 79mm / 3.11"
Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Size - thread size: m10 x 1.5 ; thread length: 24mm / 0.94"shank side width: 6mm / 0.24" ; total length: 80mm / 3.15"
Material - Spiral Flute Drill Tap is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and threads in a variety of materials.The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Size - thread size: m12 x 1.75 ; thread length: 30mm / 1.18"shank side width: 7mm / 0.28" ; total length: 88mm / 3.46"
Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The titanium nitride (TiN) coating provides increased hardness, wear resistance and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation.
Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Spiral Flute Taps: Thread Size: M4 x 0.7 + 0.1; Square End Size: 4mm / 0.16". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Tap Size: 4-40 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
Material and Finish: High speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection.
Tap Size: M6 x 1 thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
Material and Finish: Cobalt high speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection and long service life.
Spiral Flute Taps: Thread Size: M8 x 1.25 + 0.1; Square End Size: 5mm / 0.2". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Material - Spiral Flute Taps is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and high-quality threads in a variety of materials. The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The titanium nitride (TiN) coating provides increased hardness, wear resistance, and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation during the tapping process.
Exceptional Material Quality - This mini motor shaft connector stands out with its exceptional quality, crafted from premium aluminum alloy that ensures durability and dependable performance.
Compact and Efficient - With an outer diameter of approximately 19mm (0.75in) and a length of about 27mm (1.06in), this connector combines compactness with efficiency, making it an ideal choice for small-scale applications where space is a premium.
Ease of Use: Benefit from a shaft coupling designed with a straightforward structure that makes installation hassle. The compact size and smoother contribute to user-friendly operation, ensuring you can connect and disconnect with ease.
Vibration Absorption and Misalignment Compensation: This shaft coupling features an elastic connection capable of absorbing vibrations and compensating for radial, angular, and axial misalignments, providing a stable and reliable performance in your mechanical systems.
Exceptional Material Quality - This mini motor shaft connector stands out with its exceptional quality, crafted from premium aluminum alloy that ensures durability and dependable performance.
Compact and Efficient - With an outer diameter of approximately 39mm (1.54in) and a length of about 34.5mm (1.36in), this connector combines compactness with efficiency, making it an ideal choice for small-scale applications where space is a premium.
PREMIUM METAL MATERIAL: Made of high-quality metal, this shaft coupling motor connector ensures durability and a long service life for reliable performance.
UNIVERSAL JOINT DESIGN: The DIY steering universal joint allows for the connection of rigid rods with inclined axes, making it ideal for various applications such as model cars, model ships, and robots.