For example: thermocouple, temperature measuring ring, thermocouple can only measure the radiant heat of the kiln, but not the transfer heat from the kiln, so it measures the temperature of the product's environment temperature, not the product's own temperature.
Quality: Precise formulas, real material and temperature measurement is more accurate, is composed of more than 100 ingredients, similar to ceramic components.The cone tip sags until it reaches a point level with the base indicating the kiln has properly fired.
Unrestricted: Most of the temperature measuring cones are not restricted by time and space.
Application Range: It is widely used to measure the sintering temperature of refractory materials, chemical materials, abrasives, magnetic materials, and ceramics.
Package Includes: Each package contains 1pc ceramic refractory pad and 60pcs ceramic refractory nails. Sufficient quantity and the good combination will meet your various ceramic-making requirements and you can also share them with your family members or friends
Applicable Size: Ceramic refractory pad measures approx. 100 x 100mm/ 3.94 x 3.94 inch, the nail is 20mm/ 0.79 inch, suitable and compact, it can support different ceramic works, proving you with convenient and long time using experience
The number of this cone is 06 which bends at an approximate temperature of 1830° F, depending on firing conditions
Pyrometric Cones are used on a shelf inside a kiln or in a kiln sitter to determine when a firing is complete, if the kiln provided enough heat or if there was a problem during the firing
Hold loose kiln elements in place with these easy to insert, sharp-ended pins. These 1.25" pins are of a heat resistant alloy for temperatures to 2500° F (Cone 13). 12 per package.
Material - The cup grinding wheel is made of green silicon carbide, which has the characteristics of wear-resisting, high hardness, strong cutting ability, uniform particle size, high temperature resistance and strength.
White Aluminum Oxide Material - Made of quality white aluminum oxide, the flared cup has sharp edges and corners, good grinding effect, and less heat generation. It has high hardness, strong cutting force, wear resistance and long service life.
Size - thread size: m10 x 1.5 ; thread length: 25mm / 0.98"shank side width: 6mm / 0.24" ; total length: 79mm / 3.11"
Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Size - thread size: m10 x 1.5 ; thread length: 24mm / 0.94"shank side width: 6mm / 0.24" ; total length: 80mm / 3.15"
Material - Spiral Flute Drill Tap is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and threads in a variety of materials.The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Size - thread size: m12 x 1.75 ; thread length: 30mm / 1.18"shank side width: 7mm / 0.28" ; total length: 88mm / 3.46"
Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The titanium nitride (TiN) coating provides increased hardness, wear resistance and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation.
Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Spiral Flute Taps: Thread Size: M4 x 0.7 + 0.1; Square End Size: 4mm / 0.16". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Tap Size: 4-40 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
Material and Finish: High speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection.
Tap Size: M6 x 1 thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
Material and Finish: Cobalt high speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection and long service life.
Spiral Flute Taps: Thread Size: M8 x 1.25 + 0.1; Square End Size: 5mm / 0.2". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Material - Spiral Flute Taps is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and high-quality threads in a variety of materials. The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The titanium nitride (TiN) coating provides increased hardness, wear resistance, and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation during the tapping process.
Size - thread size: m10 x 1.5 ; thread length: 25mm / 0.98"shank side width: 6mm / 0.24" ; total length: 79mm / 3.11"
Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Size - thread size: m10 x 1.5 ; thread length: 24mm / 0.94"shank side width: 6mm / 0.24" ; total length: 80mm / 3.15"
Material - Spiral Flute Drill Tap is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and threads in a variety of materials.The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Size - thread size: m12 x 1.75 ; thread length: 30mm / 1.18"shank side width: 7mm / 0.28" ; total length: 88mm / 3.46"
Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The titanium nitride (TiN) coating provides increased hardness, wear resistance and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation.
Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Spiral Flute Taps: Thread Size: M4 x 0.7 + 0.1; Square End Size: 4mm / 0.16". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Tap Size: 4-40 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
Material and Finish: High speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection.
Tap Size: M6 x 1 thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
Material and Finish: Cobalt high speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection and long service life.
Spiral Flute Taps: Thread Size: M8 x 1.25 + 0.1; Square End Size: 5mm / 0.2". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Material - Spiral Flute Taps is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and high-quality threads in a variety of materials. The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The titanium nitride (TiN) coating provides increased hardness, wear resistance, and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation during the tapping process.