[Installation size]: The pile rectifier bridge filter circuit design, can be a transformer or a DC power supply, power supply voltage 12-15V / 300mA. Installation dimensions: outer frame is 67.4MM * 56MM, screw hole installation size: 57MM * 50.5MM, Screws suitable for M3 screws
[Adjustable]: Adjustable level swings, can be compatible with all different types of table headboard, two 500 ohm blue potentiometers on the board can adjust the sensitivity of the two headboards separately, turn clockwise to increase the sensitivity
Price For: Pack of 1Order Unit: Each No. of Channels: 2Channels No. of Amplifiers: 1 Amplifier Bandwidth: 18MHz Operating Temperature Min: -40°C Operating Temperature Max: 125°C Supply Voltage Range: 2.5V to 5.5V Amplifier Case Style: MSOP No. of Pins: 10Pins Packaging: Each MSL: MSL 1 - Unlimited SVHC: No SVHC (17-Dec-2015)
The gain control range of this amplifier is default 80db (-25~55db), providing some common gain and bandwidth configuration parameters.
Module uses ±5V as power supply, magnetic beads and tantalum capacitor filter greatly reduce interference and power supply ripple.This module has GND test points for users to test conveniently.
【Wide Frequency Range】With a frequency range of 1MHz-6GHz, this 20dB gain block boosters module provides exceptional width to meet diverse RF application needs.
【High Linearity and Low Noise】Designed for superior performance, this boosters ensures high linearity with ultra low noise, delivering a clear and reliable signal.
Resolution: 128 x 64; Viewing angle: greater than 160 degrees; Support voltage: 3.3V-5V DC; Power consumption: normal working 0.04W, full screen light up 0.08W
Application: 0.96 inch OLED module, used to display graphics and text information directly on your microcontroller project; Support a variety of chips: compatible with Arduino Mega, pi, 51 MCU, STIM 32, etc.
0.91 inch OLED module is designed to display graphic information and text information directly on your microcontroller project;
Resolution is 128 x 32, Supporting voltage is from 3.3V-5V DC.The display performance is better than the traditional LCD display, also lower consumption; I2C oled display, IIC (I2C communications) simplifies connections.
The high-contrast OLED module with a large 1.3-inch display and innovative OLED technology provides a clear display of elements with a high resolution of 128-by-64 pixels.
Supports multiple platforms: Arduino, 51 series MSP430 series, STM32/2 series CSR chip, etc. Convenient for your operation. Bright, anti-reflective TFT display with a large 0.96 inch image diagonal. Large resolution of 128x64 pixels for clear presentation of texts, graphics and images
Resolution: 128 x 64; Viewing angle: greater than 160 degrees; Support voltage: 3.3V-5V DC; Power consumption: normal working 0.04W, full screen light up 0.08W
Application: 0.96 inch OLED module, used to display graphics and text information directly on your microcontroller project; Support a variety of chips: compatible with Arduino Mega, pi, 51 MCU, STIM 32, etc.
0.91 inch OLED module is designed to display graphic information and text information directly on your microcontroller project;
Resolution is 128 x 32, Supporting voltage is from 3.3V-5V DC.The display performance is better than the traditional LCD display, also lower consumption; I2C oled display, IIC (I2C communications) simplifies connections.
The high-contrast OLED module with a large 1.3-inch display and innovative OLED technology provides a clear display of elements with a high resolution of 128-by-64 pixels.
Supports multiple platforms: Arduino, 51 series MSP430 series, STM32/2 series CSR chip, etc. Convenient for your operation. Bright, anti-reflective TFT display with a large 0.96 inch image diagonal. Large resolution of 128x64 pixels for clear presentation of texts, graphics and images
Resolution: 128 x 64; Viewing angle: greater than 160 degrees; Support voltage: 3.3V-5V DC; Power consumption: normal working 0.04W, full screen light up 0.08W
Application: 0.96 inch OLED module, used to display graphics and text information directly on your microcontroller project; Support a variety of chips: compatible with Arduino Mega, pi, 51 MCU, STIM 32, etc.
0.91 inch OLED module is designed to display graphic information and text information directly on your microcontroller project;
Resolution is 128 x 32, Supporting voltage is from 3.3V-5V DC.The display performance is better than the traditional LCD display, also lower consumption; I2C oled display, IIC (I2C communications) simplifies connections.
The high-contrast OLED module with a large 1.3-inch display and innovative OLED technology provides a clear display of elements with a high resolution of 128-by-64 pixels.
Supports multiple platforms: Arduino, 51 series MSP430 series, STM32/2 series CSR chip, etc. Convenient for your operation. Bright, anti-reflective TFT display with a large 0.96 inch image diagonal. Large resolution of 128x64 pixels for clear presentation of texts, graphics and images