33pcs cutting pretend
4-10 of 400 results

Hilitand Gas Flowmeter, LZQ-2 Flowmeter 0-3LPM Flow Meter with Control Valve for Oxygen, Air, Gas

• INSTRUCTIONS: This gas meter is connected to hose to measure unidirectional gas flow
• MADE OF HIGH QUALITY ACRYLIC: Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure

G5 PMS5003 Laser PM2.5 Sensor Air Quality Monitoring Dust Haze Tester

• Laser scattering principle achieves accurate measurement.The product has gone through EMI, EMC testing and passed reliability testing.
• Constant wind pressure and flow self-adaption control system.

Universal Pitot Tube Cover. HI-VIZ

• Inside of cover measures 4 3/4" long and 1 1/2" tall.
• Highly noticeable and very durable HI-VIZ

3Pcs / Set Stainless Steel Small Funnel With Handle Multifunctional Mini Oil Drainer Joint Pliers End Nipper Cutting Nipper Stainless Steel Cutter Combination Pliers Locking Plier Wrench Wire

• A must-have tool in daily life for transferring liquid, dry ingredients and powder.
• Heart- shaped stem allows the outflow of air in order to fill liquid faster.

3Pcs / Set Stainless Steel Small Funnel With Handle Multifunctional Mini Oil Drainer Joint Pliers End Nipper Cutting Nipper Stainless Steel Cutter Combination Pliers Locking Plier Wrench Wire

• A must-have tool in daily life for transferring liquid, dry ingredients and powder.
• Heart- shaped stem allows the outflow of air in order to fill liquid faster.

Delmhorst H-4 Prod Handle

• Title: Delmhorst H-4 Prod Handle
• Brand: Delmhorst

LZQ-7 Flowmeter, Air Flow Rate Gauge 2-20LPM Flow Meter Sensor Switch with Control Valve for Measuring Oxygen/Air/Gas

• HIGH QUALITY ACRYLIC: The Flow Rate Gauge is made of high quality acrylic, which has the characteristics of durable and reliable, it is transparent and can hold up to 0.6MPa pressure.
• EASY TO CONNECT: This gas meter is connected to hose to measure unidirectional gas flow. It is simple to use, and it has 8mm barbs for convenient connection of hoses.

Turbine Flow Meter, Turbine Digital Diesel Oil Fuel Flow Meter Gauge 1"BSPP For Chemicals Liquid Water

Water Rotameters,Flow Meter,Flow Gauge,Plastic Tube Flow Meter,LZS-15 60-600L/H,for Measure Single Phase of Pulsation (Liquid) Flow of The Fluid

• Made of plastic, used for testing the instantaneous flow liquid
• Measure flow range is 60-600L/H

testo 405 - Thermal Anemometer

• Measurement of air velocity, volumetric flow and air temperature
• For measurements in ventilation ducts and in rooms

Hilitand Gas Flowmeter, LZQ-2 Flowmeter 0-3LPM Flow Meter with Control Valve for Oxygen, Air, Gas

• INSTRUCTIONS: This gas meter is connected to hose to measure unidirectional gas flow
• MADE OF HIGH QUALITY ACRYLIC: Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure

G5 PMS5003 Laser PM2.5 Sensor Air Quality Monitoring Dust Haze Tester

• Laser scattering principle achieves accurate measurement.The product has gone through EMI, EMC testing and passed reliability testing.
• Constant wind pressure and flow self-adaption control system.

Universal Pitot Tube Cover. HI-VIZ

• Inside of cover measures 4 3/4" long and 1 1/2" tall.
• Highly noticeable and very durable HI-VIZ

3Pcs / Set Stainless Steel Small Funnel With Handle Multifunctional Mini Oil Drainer Joint Pliers End Nipper Cutting Nipper Stainless Steel Cutter Combination Pliers Locking Plier Wrench Wire

• A must-have tool in daily life for transferring liquid, dry ingredients and powder.
• Heart- shaped stem allows the outflow of air in order to fill liquid faster.

3Pcs / Set Stainless Steel Small Funnel With Handle Multifunctional Mini Oil Drainer Joint Pliers End Nipper Cutting Nipper Stainless Steel Cutter Combination Pliers Locking Plier Wrench Wire

• A must-have tool in daily life for transferring liquid, dry ingredients and powder.
• Heart- shaped stem allows the outflow of air in order to fill liquid faster.

Delmhorst H-4 Prod Handle

• Title: Delmhorst H-4 Prod Handle
• Brand: Delmhorst

LZQ-7 Flowmeter, Air Flow Rate Gauge 2-20LPM Flow Meter Sensor Switch with Control Valve for Measuring Oxygen/Air/Gas

• HIGH QUALITY ACRYLIC: The Flow Rate Gauge is made of high quality acrylic, which has the characteristics of durable and reliable, it is transparent and can hold up to 0.6MPa pressure.
• EASY TO CONNECT: This gas meter is connected to hose to measure unidirectional gas flow. It is simple to use, and it has 8mm barbs for convenient connection of hoses.

Turbine Flow Meter, Turbine Digital Diesel Oil Fuel Flow Meter Gauge 1"BSPP For Chemicals Liquid Water

Water Rotameters,Flow Meter,Flow Gauge,Plastic Tube Flow Meter,LZS-15 60-600L/H,for Measure Single Phase of Pulsation (Liquid) Flow of The Fluid

• Made of plastic, used for testing the instantaneous flow liquid
• Measure flow range is 60-600L/H

testo 405 - Thermal Anemometer

• Measurement of air velocity, volumetric flow and air temperature
• For measurements in ventilation ducts and in rooms

sourcing map Spiral Flute Drill Tap M10 x 1.5 M35 High Speed Steel(HSS) Aluminum Titanium Nitride (AlTiN) Coated Thread Milling Taps Machine Screw Drilling for Lathes Steel Cutting, Bronze

• Size - thread size: m10 x 1.5 ; thread length: 25mm / 0.98"shank side width: 6mm / 0.24" ; total length: 79mm / 3.11"
• Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.

sourcing map Spiral Flute Drill Tap M10 x 1.5 High Speed Steel 6542 Aluminum Titanium Nitride (AlTiN) Coated Thread Milling Taps Metric Machine for Lathes Steel Cutting, Black

• Size - thread size: m10 x 1.5 ; thread length: 24mm / 0.94"shank side width: 6mm / 0.24" ; total length: 80mm / 3.15"
• Material - Spiral Flute Drill Tap is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and threads in a variety of materials.The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.

sourcing map Spiral Flute Drill Tap M12 x 1.75 M35 High Speed Steel(HSS) Titanium Nitride Coated Thread Milling Taps Metric Machine Screw Drilling for Lathes Steel Cutting, Blue

• Size - thread size: m12 x 1.75 ; thread length: 30mm / 1.18"shank side width: 7mm / 0.28" ; total length: 88mm / 3.46"
• Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The titanium nitride (TiN) coating provides increased hardness, wear resistance and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation.

sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) Aluminum Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue

• Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 13mm (0.51") / 15mm (0.59") / 19mm (0.75") / 23mm (0.91") / 23mm (0.91") ; total length: 51mm (2.01") / 57mm (2.24") / 62mm (2.44") / 71mm (2.8") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3mm (0.12") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
• Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.

sourcing map Spiral Flute Taps, M4 x 0.7 + 0.1 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

• Spiral Flute Taps: Thread Size: M4 x 0.7 + 0.1; Square End Size: 4mm / 0.16". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
• Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.

sourcing map Spiral Flute Threading Tap 4-40 UNC, HSS (High Speed Steel) Titanium Plated Machine Thread Screw Tap 3 Flutes Tapping Tool H2 Tolerance

• Tap Size: 4-40 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
• Material and Finish: High speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection.

sourcing map Spiral Flute Thread Tap M6 x 1, Metric Cobalt HSS (High Speed Steel) Titanium Plated Machine Threading Tap H2 Tolerance Grade

• Tap Size: M6 x 1 thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
• Material and Finish: Cobalt high speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection and long service life.

sourcing map Spiral Flute Taps, M8 x 1.25 + 0.1 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

• Spiral Flute Taps: Thread Size: M8 x 1.25 + 0.1; Square End Size: 5mm / 0.2". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
• Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.

sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) 6542 Aluminum Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue

• Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 11mm (0.43") / 15mm (0.59") / 19mm (0.75") / 23mm (0.91") / 23mm (0.91") ; total length: 51mm (2.01") / 57mm (2.24") / 62mm (2.44") / 71mm (2.8") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3mm (0.12") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
• Material - Spiral Flute Taps is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and high-quality threads in a variety of materials. The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.

sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue

• Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 12mm (0.47") / 15mm (0.59") / 19mm (0.75") / 22mm (0.87") / 23mm (0.91") ; total length: 52mm (2.05") / 56mm (2.2") / 62mm (2.44") / 70mm (2.76") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3.2mm (0.13") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
• Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The titanium nitride (TiN) coating provides increased hardness, wear resistance, and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation during the tapping process.

sourcing map Spiral Flute Drill Tap M10 x 1.5 M35 High Speed Steel(HSS) Aluminum Titanium Nitride (AlTiN) Coated Thread Milling Taps Machine Screw Drilling for Lathes Steel Cutting, Bronze

• Size - thread size: m10 x 1.5 ; thread length: 25mm / 0.98"shank side width: 6mm / 0.24" ; total length: 79mm / 3.11"
• Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.

sourcing map Spiral Flute Drill Tap M10 x 1.5 High Speed Steel 6542 Aluminum Titanium Nitride (AlTiN) Coated Thread Milling Taps Metric Machine for Lathes Steel Cutting, Black

• Size - thread size: m10 x 1.5 ; thread length: 24mm / 0.94"shank side width: 6mm / 0.24" ; total length: 80mm / 3.15"
• Material - Spiral Flute Drill Tap is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and threads in a variety of materials.The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.

sourcing map Spiral Flute Drill Tap M12 x 1.75 M35 High Speed Steel(HSS) Titanium Nitride Coated Thread Milling Taps Metric Machine Screw Drilling for Lathes Steel Cutting, Blue

• Size - thread size: m12 x 1.75 ; thread length: 30mm / 1.18"shank side width: 7mm / 0.28" ; total length: 88mm / 3.46"
• Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The titanium nitride (TiN) coating provides increased hardness, wear resistance and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation.

sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) Aluminum Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue

• Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 13mm (0.51") / 15mm (0.59") / 19mm (0.75") / 23mm (0.91") / 23mm (0.91") ; total length: 51mm (2.01") / 57mm (2.24") / 62mm (2.44") / 71mm (2.8") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3mm (0.12") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
• Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.

sourcing map Spiral Flute Taps, M4 x 0.7 + 0.1 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

• Spiral Flute Taps: Thread Size: M4 x 0.7 + 0.1; Square End Size: 4mm / 0.16". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
• Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.

sourcing map Spiral Flute Threading Tap 4-40 UNC, HSS (High Speed Steel) Titanium Plated Machine Thread Screw Tap 3 Flutes Tapping Tool H2 Tolerance

• Tap Size: 4-40 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
• Material and Finish: High speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection.

sourcing map Spiral Flute Thread Tap M6 x 1, Metric Cobalt HSS (High Speed Steel) Titanium Plated Machine Threading Tap H2 Tolerance Grade

• Tap Size: M6 x 1 thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
• Material and Finish: Cobalt high speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection and long service life.

sourcing map Spiral Flute Taps, M8 x 1.25 + 0.1 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

• Spiral Flute Taps: Thread Size: M8 x 1.25 + 0.1; Square End Size: 5mm / 0.2". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
• Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.

sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) 6542 Aluminum Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue

• Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 11mm (0.43") / 15mm (0.59") / 19mm (0.75") / 23mm (0.91") / 23mm (0.91") ; total length: 51mm (2.01") / 57mm (2.24") / 62mm (2.44") / 71mm (2.8") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3mm (0.12") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
• Material - Spiral Flute Taps is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and high-quality threads in a variety of materials. The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.

sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue

• Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 12mm (0.47") / 15mm (0.59") / 19mm (0.75") / 22mm (0.87") / 23mm (0.91") ; total length: 52mm (2.05") / 56mm (2.2") / 62mm (2.44") / 70mm (2.76") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3.2mm (0.13") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
• Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The titanium nitride (TiN) coating provides increased hardness, wear resistance, and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation during the tapping process.