6mm metric angled
1-10 of 400 results

Road Reflectors Driveway Markers, 4 by 4 inch Double Sided Reflective Pavement Markers Plastic Asphalt Stud Markers Street Driveway - Pack of 10

• Super Reflective - These double-sided reflective driveway markers are microprism total reflection reflector, can reflect strong light, stands out at night, day, snow, hail, rain or any bad weather conditions.
• Heavy Pressure Resistant - Thickened base and lattice-shaped design at the bottom, the bump pattern on the back can be filled with sand to increase firmness.

Wokyo A9 Camera Night Vision Infrared Camera Hidden Low Power HD 1080P WiFi Home Camera for Baby Monitor Dog Office Security Outdoor Sports Support Bluetooth Connectivity Loop Recording

Wokyo High Pressure Pro Turbo Car Cleaning Gun, Blow Out Interior Cleaner Practisol Brush, Trumpet Head (Alloy Brush Head)

• 【 Ergonomic and Easy】According to ergonomic design, this handle is easy and comfortable to grip and use. It adopts the trigger type air volume control valve, which can be started by one button. It can control the air volume at the same time, and the air supply is stable.
• 【Quick Connection】This cleaning gun uses a Japanese male connector. Its connection does not require tools and can be quickly connected or disconnected manually. Time-saving and labor-saving for installation or disassembly, greatly improving work efficiency.

Bike Rear Rack Retractable Bike Luggage Cargo Rack Adjustable Bicycle Pannier Bike Touring Rear Seat Post Rack Aluminum Alloy Bike Mount Carrier Quick Release Road Mountain Bike 22lb Capacity

• 【Durable & Sturdy】: Made of high-quality hard Aluminum Alloy and equipped with stainless steel screws, this bike rear rack is durable and sturdy, which can bear more weight and will not be easily damaged. Can help you ride freely in rainy or humid environments and keep your bicycle dryer and cleaner.
• 【Easy to Install & Retractable Shelf】: Easy to replace and install on the sitting post of the bike rack. The retractable bike cargo rack is fixed with quick-release buckles, which is convenient to disassemble and assemble, suitable for temporary use of bikes. The adjustable mounting rod can extend backward/forward according to your needs.

Car Window Mount for Spotting Scope Adjustable Vehicle Window Mount Clamp for Monocular Binocular Telescope Cameral

• 【Viewing inside the Car】: Perfect solution for you to capture fabulous shots of animals (such as birds, antelope, and other wildlife) and landscapes without getting out of the car. You can easily attach the spotting scope, monocular, binocular, and DSLR camera to this car window mount for outdoor hunting, photo shooting and video recording.
• 【Sturdy & Stable】: All metal body and ABS knobs designed for durable use, which provides solid and stable support to hold your optic device greatly. Coming with soft protective rubber pads, the clamp and pan head would protect your equipment, and avoid scratches on the window glass.

Dual Feed Fuel Line for Holley 4150, 7/8”-20 Braided Dual Inlet Fuel Line Kit 8 an Male Flare Stainless Steel Carburetor 6 an Inlet

• 【Premium Material】: Made of lightweight aluminum. The black anodized surface for enhance its oxidizing, rusting and corrosion resistance. The Hose is stainless steel braided. HIGH STRENGTH AND DURABLE!
• 【Leak Proof Sealing】: This dual feed line comes with sealing gaskets from feed line to carburetor. Came with AN6 adapter, the fitting is designed for leak proof sealing suits for most manufacturer’s fittings.

50mm Solid Brass Double Ball Catch Closet Tension Latch for Marine Yacht RV Cabinet Tension Latch Easy Installation (Silver, 50mm - 4 pcs)

• High Quality Material:The ball latch is made of high quality materials, not easy to rust and not easy to wear, long service life, durable
• Quick Installation:It can be installed in two positions, respectively 90 degrees from each other or 180 degrees from each other, it depends on the cabinet or your preference

20 in 1 Bike Multitool with Bike Bone Wrench Portable Bicycle Repair Tool Kit Cycling Mechanic Multifunction Repair Tool Set Folding Metric Maintenance Accessories for Mountain Road Bike MTB

• 【20 in 1 Bike Repair Tool】: This 20 in 1 bike multitool includes Hex/Allen key(1mm-8mm), star shaped (T10/T15/T20/T25/T30/PH2), screwdrivers, socket wrench (8mm/10mm/15mm), Spoke Wrench 14GE and so on. These repair tools serve as portable gadgets for your emergency, cycling or traveling uses.
• 【10 Holes Bone Wrench】: The bone wrench measures about 9.5 X 2.2 x 2.2 cm/ 3.74 x 0.87 x 0.87 inches, precisely appropriate for the sizes of 6-15 mm; The bike hexagon screw is manufactured with carbon steel, sturdy and solid, not easy to fracture.

Let Go

Jewelry Repair Torch Kit, Micro Mini Gas Little Torch Welding Soldering Oxygen Acetylene Torch Kit 5 Curved Tips in Box

• Premium Quality: Jewelry Oxygen Torch Kit Main made of copper and aluminum, sturdy and durable.
• Specification: Up to 6000 Degrees F; Rugged braided dual line hoses is fit for any standard pressure regulator.The hose has special domestic oxygen and butane (liquefied gas) connectors, which can be directly connected to the torch connector.

Firecore SDS Plus Floor Scraper, 300mm×100mm,Chisel bits for SDS Plus Hammer, Adhesive Remover Bit for Vinyl Flooring VCT Tile Linoleum Concrete Mortar FS23412

• PREMIUM QUALITY MATERIAL: The Firecore brand Floor Scraper is made of high strength manganese steel. After special processing and surface hardening treatment, the scraper is high temperature resistant, rust and corrosion resistant, low wear and tear. More sturdy and durable.
• FEWER LOOSE BOLTS: Innovative locking bolts and nut fasteners provide a more secure blade connection and greater resistance to vibration loosening than conventional SDS plus thinset Removal Chisel Bits.

LEBAHAN Tile Chisel SDS Plus, [165x75 mm] 25° Bending, SDS Plus Tile Removing Chisel, SDS Plus Chisel, Professional Tile Chisel for All SDS Plus Impact Hammers and Electric Hammers

• ✅【Sturdy and Durable】Lebahan tile chisels are made of high-quality hardened alloy steel with advanced forging process and surface treatment technology. Durable and long service life.
• ✅【Excellent Removal Performance】165mm x 75mm, the perfect size for easy removal of tile and tile adhesive residue.

SDS Chisel Bit,Monkey King Bar SDS Plus Tile Chisel 165mm x 75mm,15° Angled Wide Bent Chisel - SDS Scraper,Tile Remover Tool Wall and Floor Scraper Works

• [SDS PLUS Chisel] The tile chisel of this product has the best material to extend the service life
• [SIZE] SDS Plus Chisel Length: 165 mm (6.5"), Width: 75 mm (3")

Monkey King Bar Long Pointed Chisel SDS-Max Chisel 600MM,for Concrete, Concrete Building Block,Suitable for Rotary Hammer Drill,Demolition Hammer

• 【Universal SDS MAX Shank】SDS MAX SHANK, Fits SDS-Max compatible tools
• 【Size of Point Chisel 】 Shank Type: SDS Max, Length: 600mm, Width: 18mm

Firecore SDS Max Floor Scraper Heavy Duty 300mm × 150mm, Thinset Removal Chisel Bits for SDS Max Rotary Hammer Drill Tool, Adhesive Remover Bit for Flooring Tile Linoleum Concrete Mortar FS23612

• LESS BOLT LOOSENING: Features innovative locking bolt-and-nut fasteners for more secure blade attachment and better resistance to vibrating loose than traditional SDS max floor scraper.
• 30% LESS WEAR AND TEAR: Thanks to SK85 high carbon steel blade and heat-treated handle, Firecore SDS Max chisel bit provides great wear resistance, longer life, stronger strength and durability in mortar and tile removal.

Stanley 418329 FatMax Concrete Chisel 3/4 x 12-Inch with Guard

• FatMax Concrete Chisel with Guard 300 x 19mm (12 x 3/4in)
• Model number: 4-18-329

Monkey King Bar SDS Max Floor Scraper，640 x 150MM Tile & Thinset Scaling Chisel SDS max Shank Fits SDS Max Rotary Hammers and Chipping Hammer Drills

• ✔Material: The material used for the chisel is forged steel. Longer use time, and less prone to wear material.
• ✔Use object: The special design of the chisel ultra-wide blade can eliminate more thin-wall phenomenon, remove flakes and glue. Save time and simplify work.

Monkey King Bar SDS-Plus Tile Chisel 260MM x 40MM for Remove Tile,Tile Adhesive Chisel for SDS-Plus Shank Rotary Hammers

• Durable Material:SDS Plus chisel is made of high carbon steel forged at high temperatures and are robust and of guaranteed quality.
• Size:Our chisel is 10.24 inch(260mm) long and 1.6 inch(40mm) wide.

Monkey King Bar Pionted Chisel 1-1/8" Hex Chisel 400 x 28MM for Electric Demolition Jack Hammer, Great for Removing Tile and Stone

• ✔Durable material: High quality carbon steel pointed chisel, hex shank bit, very good performance. Strong tool steel with little wear.
• ✔Adapted Pointed chisel: Hex shank chisel, pointed bits or used for blasting hammers. Compatible with almost all 1-1/8 "hex shank (28mm) removal hammers.

Nucraft SDS-Plus Tile Chisel, Wide Spade250mm x 75mm, 15° Bent Scraper Chisel for Removal of Ceramics & Tiles SDS Flat Chisel

• Specially designed with a crankshaft for quick and easy removal of tiles, rust and welding splashes as well as concrete splashes.
• It is very suitable for removing tiles from walls. Chisel protects the wall from damage. Maintains some space. The angle construction is flexible and practical.

sourcing map Spiral Flute Drill Tap M10 x 1.5 M35 High Speed Steel(HSS) Aluminum Titanium Nitride (AlTiN) Coated Thread Milling Taps Machine Screw Drilling for Lathes Steel Cutting, Bronze

• Size - thread size: m10 x 1.5 ; thread length: 25mm / 0.98"shank side width: 6mm / 0.24" ; total length: 79mm / 3.11"
• Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.

sourcing map Spiral Flute Drill Tap M10 x 1.5 High Speed Steel 6542 Aluminum Titanium Nitride (AlTiN) Coated Thread Milling Taps Metric Machine for Lathes Steel Cutting, Black

• Size - thread size: m10 x 1.5 ; thread length: 24mm / 0.94"shank side width: 6mm / 0.24" ; total length: 80mm / 3.15"
• Material - Spiral Flute Drill Tap is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and threads in a variety of materials.The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.

sourcing map Spiral Flute Drill Tap M12 x 1.75 M35 High Speed Steel(HSS) Titanium Nitride Coated Thread Milling Taps Metric Machine Screw Drilling for Lathes Steel Cutting, Blue

• Size - thread size: m12 x 1.75 ; thread length: 30mm / 1.18"shank side width: 7mm / 0.28" ; total length: 88mm / 3.46"
• Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The titanium nitride (TiN) coating provides increased hardness, wear resistance and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation.

sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) Aluminum Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue

• Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 13mm (0.51") / 15mm (0.59") / 19mm (0.75") / 23mm (0.91") / 23mm (0.91") ; total length: 51mm (2.01") / 57mm (2.24") / 62mm (2.44") / 71mm (2.8") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3mm (0.12") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
• Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.

sourcing map Spiral Flute Taps, M4 x 0.7 + 0.1 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

• Spiral Flute Taps: Thread Size: M4 x 0.7 + 0.1; Square End Size: 4mm / 0.16". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
• Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.

sourcing map Spiral Flute Threading Tap 4-40 UNC, HSS (High Speed Steel) Titanium Plated Machine Thread Screw Tap 3 Flutes Tapping Tool H2 Tolerance

• Tap Size: 4-40 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
• Material and Finish: High speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection.

sourcing map Spiral Flute Thread Tap M6 x 1, Metric Cobalt HSS (High Speed Steel) Titanium Plated Machine Threading Tap H2 Tolerance Grade

• Tap Size: M6 x 1 thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
• Material and Finish: Cobalt high speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection and long service life.

sourcing map Spiral Flute Taps, M8 x 1.25 + 0.1 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

• Spiral Flute Taps: Thread Size: M8 x 1.25 + 0.1; Square End Size: 5mm / 0.2". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
• Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.

sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) 6542 Aluminum Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue

• Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 11mm (0.43") / 15mm (0.59") / 19mm (0.75") / 23mm (0.91") / 23mm (0.91") ; total length: 51mm (2.01") / 57mm (2.24") / 62mm (2.44") / 71mm (2.8") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3mm (0.12") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
• Material - Spiral Flute Taps is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and high-quality threads in a variety of materials. The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.

sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue

• Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 12mm (0.47") / 15mm (0.59") / 19mm (0.75") / 22mm (0.87") / 23mm (0.91") ; total length: 52mm (2.05") / 56mm (2.2") / 62mm (2.44") / 70mm (2.76") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3.2mm (0.13") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
• Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The titanium nitride (TiN) coating provides increased hardness, wear resistance, and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation during the tapping process.

sourcing map Spiral Flute Drill Tap M10 x 1.5 M35 High Speed Steel(HSS) Aluminum Titanium Nitride (AlTiN) Coated Thread Milling Taps Machine Screw Drilling for Lathes Steel Cutting, Bronze

• Size - thread size: m10 x 1.5 ; thread length: 25mm / 0.98"shank side width: 6mm / 0.24" ; total length: 79mm / 3.11"
• Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.

sourcing map Spiral Flute Drill Tap M10 x 1.5 High Speed Steel 6542 Aluminum Titanium Nitride (AlTiN) Coated Thread Milling Taps Metric Machine for Lathes Steel Cutting, Black

• Size - thread size: m10 x 1.5 ; thread length: 24mm / 0.94"shank side width: 6mm / 0.24" ; total length: 80mm / 3.15"
• Material - Spiral Flute Drill Tap is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and threads in a variety of materials.The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.

sourcing map Spiral Flute Drill Tap M12 x 1.75 M35 High Speed Steel(HSS) Titanium Nitride Coated Thread Milling Taps Metric Machine Screw Drilling for Lathes Steel Cutting, Blue

• Size - thread size: m12 x 1.75 ; thread length: 30mm / 1.18"shank side width: 7mm / 0.28" ; total length: 88mm / 3.46"
• Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The titanium nitride (TiN) coating provides increased hardness, wear resistance and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation.

sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) Aluminum Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue

• Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 13mm (0.51") / 15mm (0.59") / 19mm (0.75") / 23mm (0.91") / 23mm (0.91") ; total length: 51mm (2.01") / 57mm (2.24") / 62mm (2.44") / 71mm (2.8") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3mm (0.12") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
• Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.

sourcing map Spiral Flute Taps, M4 x 0.7 + 0.1 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

• Spiral Flute Taps: Thread Size: M4 x 0.7 + 0.1; Square End Size: 4mm / 0.16". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
• Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.

sourcing map Spiral Flute Threading Tap 4-40 UNC, HSS (High Speed Steel) Titanium Plated Machine Thread Screw Tap 3 Flutes Tapping Tool H2 Tolerance

• Tap Size: 4-40 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
• Material and Finish: High speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection.

sourcing map Spiral Flute Thread Tap M6 x 1, Metric Cobalt HSS (High Speed Steel) Titanium Plated Machine Threading Tap H2 Tolerance Grade

• Tap Size: M6 x 1 thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
• Material and Finish: Cobalt high speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection and long service life.

sourcing map Spiral Flute Taps, M8 x 1.25 + 0.1 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

• Spiral Flute Taps: Thread Size: M8 x 1.25 + 0.1; Square End Size: 5mm / 0.2". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
• Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.

sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) 6542 Aluminum Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue

• Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 11mm (0.43") / 15mm (0.59") / 19mm (0.75") / 23mm (0.91") / 23mm (0.91") ; total length: 51mm (2.01") / 57mm (2.24") / 62mm (2.44") / 71mm (2.8") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3mm (0.12") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
• Material - Spiral Flute Taps is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and high-quality threads in a variety of materials. The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.

sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue

• Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 12mm (0.47") / 15mm (0.59") / 19mm (0.75") / 22mm (0.87") / 23mm (0.91") ; total length: 52mm (2.05") / 56mm (2.2") / 62mm (2.44") / 70mm (2.76") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3.2mm (0.13") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
• Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The titanium nitride (TiN) coating provides increased hardness, wear resistance, and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation during the tapping process.