The DFPlayer Mini is a compact and affordable MP3 module that can be connected directly to the speakers.
The module can be used alone with the power supply battery, speakers, and buttons. It can also be controlled by the serial port as an Arduino UNO or a module of any microcontroller with a serial port.
The DFPlayer Mini MP3 Player For Arduino is a compact MP3 module can be connected directly to the speaker. The module can be used as a stand alone module with attached battery, speaker and push buttons or through the serial port control, used in combination with an Arduino UNO or any microcontroller.
Support sampling rate (KHz): 8/11.025/12/16/22.05/24/32/44.1/48
The DFPlayer Mini is a small and low cost MP3 module player with an simplified output directly to the speaker. The module can be used as a stand alone module with attached battery, speaker and push buttons or used in combination with an or any other with RX/TX capabilities.
The DFPlayer perfectly integrates hard decoding module, through a simple serial port, which supports common audio formats , you can play the designated music without any other tedious underlying operations. The module perfectly integrated hardware decode MP3, WAV, WMA.
【DFPlayer】 DFPlayer Mini is a compact and inexpensive MP3 module can be directly connected to the speaker.
【The compact design】 The module can be used as a stand alone module with battery, speaker and push buttons or used in combination with an (for) Arduino (for) UNO or any other with RX / TX capabilities.
This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx)
It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.
Support the IC is less than KIT3/ICD2, stability is better than ICD2, also off-line batch programming. Support for PICKIT2 IC, can be viewed MPLAB IDE v8.56 software.
PICKIT2 online programming and debugging Microchip's PIC10/12/16/18/24/32, dsPIC30/dsPIC33 almost the entire line of PIC FLASH microcontroller chip.
The locking socket is a universal ZIF IC test socket, used for holding microcontrollers whilst programming, for integrated circuit chips such as microcontroller chips, breadboards, circuit boards, etc.
Package Content: 4 Pack Universal ZIF Socket; Pitch: 2.54mm; Size:35x15x14mm/1.38x0.6x0.55 inch
The locking socket is a universal ZIF IC test socket, used for holding microcontrollers whilst programming, for integrated circuit chips such as microcontroller chips, breadboards, circuit boards, etc.
Package Content: 2 Pack Universal ZIF Socket; Pitch: 2.54mm; Size:33x15x14mm/1.3x0.6x0.55 inch
The locking socket is a universal ZIF IC test socket, used for holding microcontrollers whilst programming, for integrated circuit chips such as microcontroller chips, breadboards, circuit boards, etc.
Package Content: 4 Pack Universal ZIF Socket; Pitch: 2.54mm; Size:50x22.5x14mm/2x0.9x0.55 inch
【Note】The terminal breakout board is only suitable for 38PIN narrow version ESP32 without mounting holes. (Don't fit with the ESP-WROOM-32 DevKit V1 version and ASIN:B09Z6RLS7R.Please confirm your esp32 board pins width is coincide with the pin width of the breakout board)
【ESP32 Breakout Board】The ESP32 Breakout Board can expand one GPIO pin of esp32 development board to two. Convenient for users to reuse all pins in smart home electronic modules & components, DIY projects.
IMPORTANT: Only compatible with 38 pins wide and Mounting Hole Version esp32 development board(https://www.amazon.co.uk/dp/B0B4DPKJTQ). Not applicable to other versions.
GPIO 1 INTO 2: The esp32 breakout board can expand one GPIO pin of esp32 development board to two.Convenient to reuse all pins in smart home DIY projects. Great breadboard alternative.
High Quality Material: Made of high quality tin plated red copper for high conductivity and ant- oxidation. The insulation sleaves are made of nylon to prevent short circuiting. AWG 26 Solderless Ribbon Jumper Wires.
Easy to Use: The cables can be separated to form an assembly containing the number of wires required for the desired connection and to support. Multi colored, 10 different colors. No need for soldering, simply plug and play.
The 10 colour repeat clear carrier colour coded 40 PIN ribbon cable, which can be separated into single wire or multi - strand combination for various usages.easy to identify each wires in your DIY or prototype.
Cable material: 12-core pure copper wire,premium quality and safe,saving space and weight.
✅ AZ-Delivery 120 pcs. Female to Female Jumper wires are copper-clad aluminium made wires perfectly compatible with 2.54 mm straight pin headers.
✅ Jumper Cables’ length is 20 cm (8 inches) and they can be separated to form an assembly con-taining the number of wires you require for your project.
VARIOUS USAGE SCENARIOS: These wires come in a 40-pin ribbon cable, which can be separated into single wire or multi - strand combination for various usages. Also, different type of wires to support different usage: (30.5cm/12.0in; 20.5cm/8.0in; 10.4cm/4in; Female to Female; Female to Male; Male to Male).
EASY-TO-USAGE: The 10 colour repeat clear carrier colour coded 40 PIN ribbon cable, easy to identify each wires in your DIY or prototype; 2.54 Pitch Male or female connector at end of each wires, will easy to support different connection: bread board hole, pin header, female header or other connectors with different pins.
(1)24mm length alligator clip, 20CM length dupont cable with pure copper inside, smooth conductivity.
(2)The male ends meant for insertion into standard 0.1 quot;(2.54mm) female sockets and the female ends are meant for insertion into standard 0.1 quot(2.54mm) male headers.
Package included: 2X 40pin male to female breadboard jumper wires, 2X 40pin male to male breadboard jumper wires, 2x40pin female to female breadboard jumper wires
The breadboard jumper wires 40 PIN ribbon cable, easy to identify each wires in your DIY or prototype;Fast circuit tests without soldering. Comes with 10 colors to easily distinguish chart connections.
High Quality Material: Made of high quality tin plated red copper for high conductivity and ant- oxidation. The insulation sleaves are made of nylon to prevent short circuiting. AWG 26 Solderless Ribbon Jumper Wires.
Easy to Use: The cables can be separated to form an assembly containing the number of wires required for the desired connection and to support. Multi colored, 10 different colors. No need for soldering, simply plug and play.
The 10 colour repeat clear carrier colour coded 40 PIN ribbon cable, which can be separated into single wire or multi - strand combination for various usages.easy to identify each wires in your DIY or prototype.
Cable material: 12-core pure copper wire,premium quality and safe,saving space and weight.
✅ AZ-Delivery 120 pcs. Female to Female Jumper wires are copper-clad aluminium made wires perfectly compatible with 2.54 mm straight pin headers.
✅ Jumper Cables’ length is 20 cm (8 inches) and they can be separated to form an assembly con-taining the number of wires you require for your project.
VARIOUS USAGE SCENARIOS: These wires come in a 40-pin ribbon cable, which can be separated into single wire or multi - strand combination for various usages. Also, different type of wires to support different usage: (30.5cm/12.0in; 20.5cm/8.0in; 10.4cm/4in; Female to Female; Female to Male; Male to Male).
EASY-TO-USAGE: The 10 colour repeat clear carrier colour coded 40 PIN ribbon cable, easy to identify each wires in your DIY or prototype; 2.54 Pitch Male or female connector at end of each wires, will easy to support different connection: bread board hole, pin header, female header or other connectors with different pins.
(1)24mm length alligator clip, 20CM length dupont cable with pure copper inside, smooth conductivity.
(2)The male ends meant for insertion into standard 0.1 quot;(2.54mm) female sockets and the female ends are meant for insertion into standard 0.1 quot(2.54mm) male headers.