Beauty tools disinfectant
9-10 of 400 results
Bosch Accessories
Bosch Accessories 1608600239 Stone Cup Wheel, 110mm, 90mm, 55mm-24mm
£13.75- Appropriate for GBH 10 DC/GBH 11 DE Professional
- Colour: black
Sourcing Map
sourcing map Grinding Wheel 4 Inch 120 Grits Aluminum Oxide Cup Abrasive Wheels, White Corundum for Hardened Steel, Grinding Machine, White
£11.99- Size - Granularity: 120 Grits, Outer Diameter: 100mm / 3.94inch, Inner Diameter: 20mm / 0.79inch, Height: 100mm / 3.94inch
- Feature - The grinding wheel has high accuracy, high efficiency, and good roughness, resulting in less abrasive consumption and long service life.
Sourcing Map
sourcing map Grinding Wheel 6 Inch 120 Grits Aluminum Oxide Cup Abrasive Wheels, White Corundum for Hardened Steel, Grinding Machine
£17.99- Size - Granularity: 120 Grits, Outer Diameter: 150mm / 5.91inch, Inner Diameter: 120mm / 4.72inch, Hole Diameter: 32mm / 1.26inch, Height: 50mm / 1.97inch
- Feature - The grinding wheel has high accuracy, high efficiency, and good roughness, resulting in less abrasive consumption and long service life.
VALVE GRINDING PASTE COARSE FINE GARAGE AUTOMOTIVE TOOLS REMOVE DEFECTS CA64
£3.51- Valve Grinding Past
- Coarse & fine
Sourcing Map
sourcing map Grinding Wheel 5 Inch 60 Grits Aluminum Oxide Cup Abrasive Wheels, Brown Corundum for Hardened Steel, Grinding Machine, Grey
£16.49- Size - Granularity: 60 Grits, Outer Diameter: 125mm / 4.92inch, Inner Diameter: 32mm / 1.26inch, Height: 63mm / 2.48inch
- Feature - The grinding wheel has high accuracy, high efficiency, and good roughness, resulting in less abrasive consumption and long service life.
Bosch Accessories
Bosch 1608620055 Grinding Stone Cylin Med Hard, 20mm
£9.31- Grinding stone Cylin med hard G60 L20mm
- Content: Grinding stone Cylin med hard G60 L20mm
Sourcing Map
sourcing map Cup Grinding Wheel 4 Inch 80 Grits Silicon Carbide Cup Abrasive Wheel Green Aluminum Oxide for Knife Sharpening Machine Abrasive Tool
£15.99- Size - Granularity: 80 Grits, Outer Diameter: 100 / 4-inch, Inner Diameter: 20mm / 0.79-inch, Height: 50mm / 2-inch
- Material - The cup grinding wheel is made of green silicon carbide, which has the characteristics of wear-resisting, high hardness, strong cutting ability, uniform particle size, high temperature resistance and strength.
Sourcing Map
sourcing map 2pcs Grinding Wheel 2 Inch 80 Grits Aluminum Oxide Cup Abrasive Wheels, White Corundum for Hardened Steel, Grinding Machine
£9.49- Size - Granularity: 80 Grits, Outer Diameter: 50mm / 1.97inch, Inner Diameter: 40mm / 1.57inch, Hole Diameter: 13mm / 0.51inch, Height: 25mm / 0.98inch
- Feature - The grinding wheel has high accuracy, high efficiency, and good roughness, resulting in less abrasive consumption and long service life.
Wolfcraft
wolfcraft Mounted Stone Set 5 Pcs. I 2142000
£9.49- For metals, glass, ceramics, plastic materials
- Material: aluminium oxide
Sourcing Map
sourcing map 4-Inch Flaring Cup Grinding Wheel 80 Grits White Aluminum Oxide Wheel Surface Grinding Abrasive Wheel Ceramic Tool
£12.49- Dimension - Granularity: 80 Grits, Outer Diameter: 100mm / 4inch, Inner Diameter: 75mm / 3inch, Hole Diameter: 20mm / 0.79inch, Height: 35mm / 1.38inch
- White Aluminum Oxide Material - Made of quality white aluminum oxide, the flared cup has sharp edges and corners, good grinding effect, and less heat generation. It has high hardness, strong cutting force, wear resistance and long service life.
Sourcing Map
sourcing map Spiral Flute Drill Tap M10 x 1.5 M35 High Speed Steel(HSS) Aluminum Titanium Nitride (AlTiN) Coated Thread Milling Taps Machine Screw Drilling for Lathes Steel Cutting, Bronze
£7.49- Size - thread size: m10 x 1.5 ; thread length: 25mm / 0.98"shank side width: 6mm / 0.24" ; total length: 79mm / 3.11"
- Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map Spiral Flute Drill Tap M10 x 1.5 High Speed Steel 6542 Aluminum Titanium Nitride (AlTiN) Coated Thread Milling Taps Metric Machine for Lathes Steel Cutting, Black
£7.49- Size - thread size: m10 x 1.5 ; thread length: 24mm / 0.94"shank side width: 6mm / 0.24" ; total length: 80mm / 3.15"
- Material - Spiral Flute Drill Tap is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and threads in a variety of materials.The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map Spiral Flute Drill Tap M12 x 1.75 M35 High Speed Steel(HSS) Titanium Nitride Coated Thread Milling Taps Metric Machine Screw Drilling for Lathes Steel Cutting, Blue
£8.49- Size - thread size: m12 x 1.75 ; thread length: 30mm / 1.18"shank side width: 7mm / 0.28" ; total length: 88mm / 3.46"
- Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The titanium nitride (TiN) coating provides increased hardness, wear resistance and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation.
Sourcing Map
sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) Aluminum Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue
£12.99 (£2.60 / count)- Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 13mm (0.51") / 15mm (0.59") / 19mm (0.75") / 23mm (0.91") / 23mm (0.91") ; total length: 51mm (2.01") / 57mm (2.24") / 62mm (2.44") / 71mm (2.8") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3mm (0.12") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
- Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map Spiral Flute Taps, M4 x 0.7 + 0.1 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap
£8.99- Spiral Flute Taps: Thread Size: M4 x 0.7 + 0.1; Square End Size: 4mm / 0.16". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
- Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Sourcing Map
sourcing map Spiral Flute Threading Tap 4-40 UNC, HSS (High Speed Steel) Titanium Plated Machine Thread Screw Tap 3 Flutes Tapping Tool H2 Tolerance
£6.49- Tap Size: 4-40 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
- Material and Finish: High speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection.
Sourcing Map
sourcing map Spiral Flute Thread Tap M6 x 1, Metric Cobalt HSS (High Speed Steel) Titanium Plated Machine Threading Tap H2 Tolerance Grade
£9.99- Tap Size: M6 x 1 thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
- Material and Finish: Cobalt high speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection and long service life.
Sourcing Map
sourcing map Spiral Flute Taps, M8 x 1.25 + 0.1 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap
£12.99- Spiral Flute Taps: Thread Size: M8 x 1.25 + 0.1; Square End Size: 5mm / 0.2". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
- Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Sourcing Map
sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) 6542 Aluminum Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue
£12.99 (£2.60 / count)- Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 11mm (0.43") / 15mm (0.59") / 19mm (0.75") / 23mm (0.91") / 23mm (0.91") ; total length: 51mm (2.01") / 57mm (2.24") / 62mm (2.44") / 71mm (2.8") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3mm (0.12") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
- Material - Spiral Flute Taps is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and high-quality threads in a variety of materials. The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue
£12.99 (£2.60 / count)- Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 12mm (0.47") / 15mm (0.59") / 19mm (0.75") / 22mm (0.87") / 23mm (0.91") ; total length: 52mm (2.05") / 56mm (2.2") / 62mm (2.44") / 70mm (2.76") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3.2mm (0.13") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
- Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The titanium nitride (TiN) coating provides increased hardness, wear resistance, and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation during the tapping process.
Sourcing Map
sourcing map Spiral Flute Drill Tap M10 x 1.5 M35 High Speed Steel(HSS) Aluminum Titanium Nitride (AlTiN) Coated Thread Milling Taps Machine Screw Drilling for Lathes Steel Cutting, Bronze
£7.49- Size - thread size: m10 x 1.5 ; thread length: 25mm / 0.98"shank side width: 6mm / 0.24" ; total length: 79mm / 3.11"
- Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map Spiral Flute Drill Tap M10 x 1.5 High Speed Steel 6542 Aluminum Titanium Nitride (AlTiN) Coated Thread Milling Taps Metric Machine for Lathes Steel Cutting, Black
£7.49- Size - thread size: m10 x 1.5 ; thread length: 24mm / 0.94"shank side width: 6mm / 0.24" ; total length: 80mm / 3.15"
- Material - Spiral Flute Drill Tap is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and threads in a variety of materials.The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map Spiral Flute Drill Tap M12 x 1.75 M35 High Speed Steel(HSS) Titanium Nitride Coated Thread Milling Taps Metric Machine Screw Drilling for Lathes Steel Cutting, Blue
£8.49- Size - thread size: m12 x 1.75 ; thread length: 30mm / 1.18"shank side width: 7mm / 0.28" ; total length: 88mm / 3.46"
- Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The titanium nitride (TiN) coating provides increased hardness, wear resistance and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation.
Sourcing Map
sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) Aluminum Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue
£12.99 (£2.60 / count)- Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 13mm (0.51") / 15mm (0.59") / 19mm (0.75") / 23mm (0.91") / 23mm (0.91") ; total length: 51mm (2.01") / 57mm (2.24") / 62mm (2.44") / 71mm (2.8") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3mm (0.12") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
- Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map Spiral Flute Taps, M4 x 0.7 + 0.1 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap
£8.99- Spiral Flute Taps: Thread Size: M4 x 0.7 + 0.1; Square End Size: 4mm / 0.16". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
- Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Sourcing Map
sourcing map Spiral Flute Threading Tap 4-40 UNC, HSS (High Speed Steel) Titanium Plated Machine Thread Screw Tap 3 Flutes Tapping Tool H2 Tolerance
£6.49- Tap Size: 4-40 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
- Material and Finish: High speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection.
Sourcing Map
sourcing map Spiral Flute Thread Tap M6 x 1, Metric Cobalt HSS (High Speed Steel) Titanium Plated Machine Threading Tap H2 Tolerance Grade
£9.99- Tap Size: M6 x 1 thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
- Material and Finish: Cobalt high speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection and long service life.
Sourcing Map
sourcing map Spiral Flute Taps, M8 x 1.25 + 0.1 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap
£12.99- Spiral Flute Taps: Thread Size: M8 x 1.25 + 0.1; Square End Size: 5mm / 0.2". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
- Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Sourcing Map
sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) 6542 Aluminum Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue
£12.99 (£2.60 / count)- Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 11mm (0.43") / 15mm (0.59") / 19mm (0.75") / 23mm (0.91") / 23mm (0.91") ; total length: 51mm (2.01") / 57mm (2.24") / 62mm (2.44") / 71mm (2.8") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3mm (0.12") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
- Material - Spiral Flute Taps is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and high-quality threads in a variety of materials. The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue
£12.99 (£2.60 / count)- Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 12mm (0.47") / 15mm (0.59") / 19mm (0.75") / 22mm (0.87") / 23mm (0.91") ; total length: 52mm (2.05") / 56mm (2.2") / 62mm (2.44") / 70mm (2.76") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3.2mm (0.13") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
- Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The titanium nitride (TiN) coating provides increased hardness, wear resistance, and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation during the tapping process.
Sourcing Map
sourcing map Spiral Flute Drill Tap M10 x 1.5 M35 High Speed Steel(HSS) Aluminum Titanium Nitride (AlTiN) Coated Thread Milling Taps Machine Screw Drilling for Lathes Steel Cutting, Bronze
£7.49- Size - thread size: m10 x 1.5 ; thread length: 25mm / 0.98"shank side width: 6mm / 0.24" ; total length: 79mm / 3.11"
- Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map Spiral Flute Drill Tap M10 x 1.5 High Speed Steel 6542 Aluminum Titanium Nitride (AlTiN) Coated Thread Milling Taps Metric Machine for Lathes Steel Cutting, Black
£7.49- Size - thread size: m10 x 1.5 ; thread length: 24mm / 0.94"shank side width: 6mm / 0.24" ; total length: 80mm / 3.15"
- Material - Spiral Flute Drill Tap is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and threads in a variety of materials.The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map Spiral Flute Drill Tap M12 x 1.75 M35 High Speed Steel(HSS) Titanium Nitride Coated Thread Milling Taps Metric Machine Screw Drilling for Lathes Steel Cutting, Blue
£8.49- Size - thread size: m12 x 1.75 ; thread length: 30mm / 1.18"shank side width: 7mm / 0.28" ; total length: 88mm / 3.46"
- Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The titanium nitride (TiN) coating provides increased hardness, wear resistance and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation.
Sourcing Map
sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) Aluminum Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue
£12.99 (£2.60 / count)- Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 13mm (0.51") / 15mm (0.59") / 19mm (0.75") / 23mm (0.91") / 23mm (0.91") ; total length: 51mm (2.01") / 57mm (2.24") / 62mm (2.44") / 71mm (2.8") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3mm (0.12") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
- Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map Spiral Flute Taps, M4 x 0.7 + 0.1 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap
£8.99- Spiral Flute Taps: Thread Size: M4 x 0.7 + 0.1; Square End Size: 4mm / 0.16". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
- Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Sourcing Map
sourcing map Spiral Flute Threading Tap 4-40 UNC, HSS (High Speed Steel) Titanium Plated Machine Thread Screw Tap 3 Flutes Tapping Tool H2 Tolerance
£6.49- Tap Size: 4-40 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
- Material and Finish: High speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection.
Sourcing Map
sourcing map Spiral Flute Thread Tap M6 x 1, Metric Cobalt HSS (High Speed Steel) Titanium Plated Machine Threading Tap H2 Tolerance Grade
£9.99- Tap Size: M6 x 1 thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
- Material and Finish: Cobalt high speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection and long service life.
Sourcing Map
sourcing map Spiral Flute Taps, M8 x 1.25 + 0.1 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap
£12.99- Spiral Flute Taps: Thread Size: M8 x 1.25 + 0.1; Square End Size: 5mm / 0.2". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
- Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Sourcing Map
sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) 6542 Aluminum Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue
£12.99 (£2.60 / count)- Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 11mm (0.43") / 15mm (0.59") / 19mm (0.75") / 23mm (0.91") / 23mm (0.91") ; total length: 51mm (2.01") / 57mm (2.24") / 62mm (2.44") / 71mm (2.8") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3mm (0.12") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
- Material - Spiral Flute Taps is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and high-quality threads in a variety of materials. The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue
£12.99 (£2.60 / count)- Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 12mm (0.47") / 15mm (0.59") / 19mm (0.75") / 22mm (0.87") / 23mm (0.91") ; total length: 52mm (2.05") / 56mm (2.2") / 62mm (2.44") / 70mm (2.76") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3.2mm (0.13") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
- Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The titanium nitride (TiN) coating provides increased hardness, wear resistance, and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation during the tapping process.