The aluminium butyl is glued to strongly vibrating rattling plates in the door area and an enormous improvement of the speaker sound is guaranteed. The bass sounds deeper. The entire music sound becomes clearer through the effective suppression of background noise. Not suitable for the engine compartment.
Emphasers ESP-DM4 composite insulation mats improve vehicle interior acoustics, reduce vehicle resonance, engine, rolling or vibration noise, allowing optimal music playback in the car or motorhome.
The ESP-DM4 mats have a material thickness of 2.1 mm and are ideal for use on vehicle doors, especially on large door outer plates. The combination of aluminium and butyl reduces unwanted swinging of the door panel or door panel and provides impressive bass response.
[Installation size]: The pile rectifier bridge filter circuit design, can be a transformer or a DC power supply, power supply voltage 12-15V / 300mA. Installation dimensions: outer frame is 67.4MM * 56MM, screw hole installation size: 57MM * 50.5MM, Screws suitable for M3 screws
[Adjustable]: Adjustable level swings, can be compatible with all different types of table headboard, two 500 ohm blue potentiometers on the board can adjust the sensitivity of the two headboards separately, turn clockwise to increase the sensitivity
Price For: Pack of 1Order Unit: Each No. of Channels: 2Channels No. of Amplifiers: 1 Amplifier Bandwidth: 18MHz Operating Temperature Min: -40°C Operating Temperature Max: 125°C Supply Voltage Range: 2.5V to 5.5V Amplifier Case Style: MSOP No. of Pins: 10Pins Packaging: Each MSL: MSL 1 - Unlimited SVHC: No SVHC (17-Dec-2015)
The gain control range of this amplifier is default 80db (-25~55db), providing some common gain and bandwidth configuration parameters.
Module uses ±5V as power supply, magnetic beads and tantalum capacitor filter greatly reduce interference and power supply ripple.This module has GND test points for users to test conveniently.
【Wide Frequency Range】With a frequency range of 1MHz-6GHz, this 20dB gain block boosters module provides exceptional width to meet diverse RF application needs.
【High Linearity and Low Noise】Designed for superior performance, this boosters ensures high linearity with ultra low noise, delivering a clear and reliable signal.
[Installation size]: The pile rectifier bridge filter circuit design, can be a transformer or a DC power supply, power supply voltage 12-15V / 300mA. Installation dimensions: outer frame is 67.4MM * 56MM, screw hole installation size: 57MM * 50.5MM, Screws suitable for M3 screws
[Adjustable]: Adjustable level swings, can be compatible with all different types of table headboard, two 500 ohm blue potentiometers on the board can adjust the sensitivity of the two headboards separately, turn clockwise to increase the sensitivity
Price For: Pack of 1Order Unit: Each No. of Channels: 2Channels No. of Amplifiers: 1 Amplifier Bandwidth: 18MHz Operating Temperature Min: -40°C Operating Temperature Max: 125°C Supply Voltage Range: 2.5V to 5.5V Amplifier Case Style: MSOP No. of Pins: 10Pins Packaging: Each MSL: MSL 1 - Unlimited SVHC: No SVHC (17-Dec-2015)
The gain control range of this amplifier is default 80db (-25~55db), providing some common gain and bandwidth configuration parameters.
Module uses ±5V as power supply, magnetic beads and tantalum capacitor filter greatly reduce interference and power supply ripple.This module has GND test points for users to test conveniently.
【Wide Frequency Range】With a frequency range of 1MHz-6GHz, this 20dB gain block boosters module provides exceptional width to meet diverse RF application needs.
【High Linearity and Low Noise】Designed for superior performance, this boosters ensures high linearity with ultra low noise, delivering a clear and reliable signal.