Utah pneumatic push to connect: air and water Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32~140°F Applicable Tube: PU/NYLON/Soft PE hose fitting
Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly
Utah pneumatic Push to Connect fittings: air and water Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32~140°F Applicable Tube: PU/NYLON/Soft PE hose fittings
Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly
【Specification】: 1" (32mm) 3 Way elbow pvc-u fitting connector.
【Reliable Quality】: Made of high quality PVC-U material, it has low temperature resistance, corrosion resistance, impact resistance, no fading, cracking or peeling, durable.
UNIVERSAL DESIGN: Tube and Thread Size : 8mm OD x G1/8" Male; Operating Pressure : 0-1MPa ; Operating temperature:-10 - 60 Degree Celsius
Push to connect fitting can realize the pipeline together or disconnected without tools, mainly used for air compression systems, vacuum systems, pneumatic systems, 3D printers.
Separate Valve: 2 way hose pipe connector has a separate valve that allows you to easily control the flow rate and volume of water by simply twisting a switch to connect two pipes, allowing you to work quickly and with increased convenience
Sealed Against leaks: Hose to tap connector is well tightened and leak-proof, and when connected to the separator is very secure, the shut-off value completely stops water escaping. Withstands water pressure and velocity of flow
[Durable Construction] - Made from S2 steel material for ultimate durability, suitable for industrial use. With bright chrome and spray treatment for anti-rust and wear-resistant.
[T Handle] - Comfortable ergonomic designed for greater torque, and prevents hand tired during use, the L key design can provide maximum torque, very suitable for working in small spaces
【UNIVERSAL DESIGN】- Product Name : Elbow Push to Connect Fitting ; Type: 90 Deg Swivel Elbow Male Connector ;Tube and Thread Size : 4mm OD x 1/8" NPT Male
[Material] - 6063 aluminum with medium strength, good processing performance, corrosion resistance, high toughness, weldability, long-lasting durability and processing is not easy to deform.
[Seamless Construction] - Smooth surface without a seam and is available in mechanical structural components for precision applications.
APPLICATION: The oil hose can be used for transporting lubricating oil and water, as lubricating oil tubing and water tubing, and is suitable for use in low-pressure systems
SIZE: 4mm/0.16-inch inner dia; 6mm/0.24-inch outer dia; 1m/3.3ft total length
Barb Dia.(Fit Hose ID): 8mm x 4mm x 8mm(5/16" x 1/8"x 5/16"); Barb Length(Approx): 16mm / 0.63"; Total Size: 52mm x 26mm x 8mm / 2.05" x 1.02" x 0.31"(L*H*T)
This coupling has barbed connections on each end for connecting three hoses with the different diameter in a straight run.
APPLICATION: Flexible silicone hose is mainly used for various low-pressure industrial applications, various pump transfer; Used as water tubing: used as liquid transportation tubing, connected with water valve for drainage, family garden irrigation, etc.
SIZE: 5/32"(4mm) inner dia, 9/32"(7mm) outer dia, 5 Feet total length, -76°F to +428°F(-60°C to +220°C) working temperature
The stainless steel rod is suitable for DIY craft and can be applied for various shafts DIY model planes, Gear shafts, motor shafts, short support shafts, shaft pocket models, model ships, model cars, etc.
The round rods are made of 304 stainless steel, and the color is silver tone, Shaft Diameter: 4mm(0.16 inch), Shaft Length: 400mm(15.7 inch), Pack of 10pcs x stainless steel round rod.
【UNIVERSAL DESIGN】- Product Name : Elbow Push to Connect Fitting ; Type: 90 Deg Swivel Elbow Male Connector ;Tube and Thread Size : 8mm OD x 1/4" NPT Male
1.This fitting have a large range sizes starting at 1/8" up to 1" BSP male thread with a barbed hose tail. Tubing Dia is 6/8/10/12/16/19/25 mm, sizes given are for the inner diameter of the pipe.
2.Connector used to connect air, water, gas, fuel, oil and inert gas pipes in a simple and quick way. Use with plastic or rubber hose, fit for truck, car, boat, garden, plumbing, heater, furnace repair etc.
3/4" bsp female thread reducer to 1/4" pushfit ,screw the 3/4" female side onto your 3/4" male , then this will allow you to insert your 1/4" lldpe water pipe
Push fit fittings, Quick Connect Fitting 1/4" RO Water System
1/2" bsp to 1/4" Pushfit Connector - Feed Water Connection Fitting - (Fridge Freezer water filter plumbing fitting or any water system with 1/4" lldpe water pipe)