The 10 colour repeat clear carrier colour coded 40 PIN ribbon cable, which can be separated into single wire or multi - strand combination for various usages.easy to identify each wires in your DIY or prototype.
Cable material: 12-core pure copper wire,premium quality and safe,saving space and weight.
Working voltage: 3.0-5.8V; Current: 0.18A. Air volume: 5m3 / h; Number of revolutions: 13200RPM. It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Upgrade bearing of this fan not only can make sure outputing a lot of wind,but also quiet enough.
3 sections large capacity blanket laundry baskets - Divided into 3 sections laundry hamper,so you can sort your dark, color from light as you drop clothing into the bags. Each laundry bag can hold up to 2 standard size loads of laundry.
SG90 is a high quality, cost effective servo for all your mechatronic requirements. It comes with a 3-pin power and control cable.
SG90 9G Micro Servo Motor for RC Helicopter, Micro Robot, Robot Arms and Boats Fit for all types of R/C toys and also make electronics DIY based on compatible with Arduino, Raspberry Pi
This version of the MCP2515 Breakout solves some of the board's problems. 120 ohm terminal resistors. With Impedance matching, ensures the drive capability, long distance data transmission prevents signal emission
High Power High Efficiency: Supports CAN V2.0B specification, the communication speed 1Mb/s. High reliability, strong vibration resistance, good electromechanical performance. 0 to 8-byte data field. With standard frame, expand the frame and remote frame.
Breadboard power supply module, for Ar-duino board solderless breadboard. The module provides dual 5V and 3.3V power rails, and has a multi-purpose female USB socket, convenient external lead use.
Input Voltage: DC 6.5-12V; Output Voltage: DC 3.3V 5V; Input do not exceed 700mA, Locking ON / OFF Switch, no need to unplug the power adapter, LED Power Indicator indicated when the board is powered up.
[Installation size]: The pile rectifier bridge filter circuit design, can be a transformer or a DC power supply, power supply voltage 12-15V / 300mA. Installation dimensions: outer frame is 67.4MM * 56MM, screw hole installation size: 57MM * 50.5MM, Screws suitable for M3 screws
[Adjustable]: Adjustable level swings, can be compatible with all different types of table headboard, two 500 ohm blue potentiometers on the board can adjust the sensitivity of the two headboards separately, turn clockwise to increase the sensitivity
Price For: Pack of 1Order Unit: Each No. of Channels: 2Channels No. of Amplifiers: 1 Amplifier Bandwidth: 18MHz Operating Temperature Min: -40°C Operating Temperature Max: 125°C Supply Voltage Range: 2.5V to 5.5V Amplifier Case Style: MSOP No. of Pins: 10Pins Packaging: Each MSL: MSL 1 - Unlimited SVHC: No SVHC (17-Dec-2015)
The gain control range of this amplifier is default 80db (-25~55db), providing some common gain and bandwidth configuration parameters.
Module uses ±5V as power supply, magnetic beads and tantalum capacitor filter greatly reduce interference and power supply ripple.This module has GND test points for users to test conveniently.
【Wide Frequency Range】With a frequency range of 1MHz-6GHz, this 20dB gain block boosters module provides exceptional width to meet diverse RF application needs.
【High Linearity and Low Noise】Designed for superior performance, this boosters ensures high linearity with ultra low noise, delivering a clear and reliable signal.
The magnetic rod block is an essentual part for the opperation of your Hiblow HP 60 & Hiblow HP 80. The magnetic rod block is operated by 2 magnets that push the rod block back and fourth betweed the diaphragms pushing air in and out. It is uncommon for this part to break however it does happen. If you are fixing your Hiblow you should check this part
Premium Quality: This water cooling block adopts high quality pure aluminum material, which is sturdy and rust-resistant. It is not easily damaged, has qualified quality and long service life.
Easy Operation: This water cooling block is easy to install and convenient to use, which can provide you with a superior using effect.
[GOOD INSULATION]: This PTC heatingfeatures excellent insulation with temperature resistance, allowing it to operate in various conditions.
[SAFE AND SECURE]: Adopting PTC thermistor, this electric heater eliminates theof open flames, redness, and toxic and harmful gases, ensuring safe and secure use.
[Excellent heat dissipation]: The all-metal heat sink block has a good heat dissipation effect, allowing it to support high temperature filaments for prolonged printing sessions.
[Stable extrusion]: The stainless steel nozzle ensures stable extrusion, providing reliable and consistent 3D printing performance.
Scope of Application: This water cooling block has high practicality, which is suitable for computer CPU water, industrial frequency inverter drive, laser head cooling, industrial control cabinet cooling.
The magnetic rod block is an essentual part for the opperation of your Hiblow HP 60 & Hiblow HP 80. The magnetic rod block is operated by 2 magnets that push the rod block back and fourth betweed the diaphragms pushing air in and out. It is uncommon for this part to break however it does happen. If you are fixing your Hiblow you should check this part
Premium Quality: This water cooling block adopts high quality pure aluminum material, which is sturdy and rust-resistant. It is not easily damaged, has qualified quality and long service life.
Easy Operation: This water cooling block is easy to install and convenient to use, which can provide you with a superior using effect.
[GOOD INSULATION]: This PTC heatingfeatures excellent insulation with temperature resistance, allowing it to operate in various conditions.
[SAFE AND SECURE]: Adopting PTC thermistor, this electric heater eliminates theof open flames, redness, and toxic and harmful gases, ensuring safe and secure use.
[Excellent heat dissipation]: The all-metal heat sink block has a good heat dissipation effect, allowing it to support high temperature filaments for prolonged printing sessions.
[Stable extrusion]: The stainless steel nozzle ensures stable extrusion, providing reliable and consistent 3D printing performance.
Scope of Application: This water cooling block has high practicality, which is suitable for computer CPU water, industrial frequency inverter drive, laser head cooling, industrial control cabinet cooling.