The 10 colour repeat clear carrier colour coded 40 PIN ribbon cable, which can be separated into single wire or multi - strand combination for various usages.easy to identify each wires in your DIY or prototype.
Cable material: 12-core pure copper wire,premium quality and safe,saving space and weight.
Working voltage: 3.0-5.8V; Current: 0.18A. Air volume: 5m3 / h; Number of revolutions: 13200RPM. It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Upgrade bearing of this fan not only can make sure outputing a lot of wind,but also quiet enough.
3 sections large capacity blanket laundry baskets - Divided into 3 sections laundry hamper,so you can sort your dark, color from light as you drop clothing into the bags. Each laundry bag can hold up to 2 standard size loads of laundry.
SG90 is a high quality, cost effective servo for all your mechatronic requirements. It comes with a 3-pin power and control cable.
SG90 9G Micro Servo Motor for RC Helicopter, Micro Robot, Robot Arms and Boats Fit for all types of R/C toys and also make electronics DIY based on compatible with Arduino, Raspberry Pi
This version of the MCP2515 Breakout solves some of the board's problems. 120 ohm terminal resistors. With Impedance matching, ensures the drive capability, long distance data transmission prevents signal emission
High Power High Efficiency: Supports CAN V2.0B specification, the communication speed 1Mb/s. High reliability, strong vibration resistance, good electromechanical performance. 0 to 8-byte data field. With standard frame, expand the frame and remote frame.
Breadboard power supply module, for Ar-duino board solderless breadboard. The module provides dual 5V and 3.3V power rails, and has a multi-purpose female USB socket, convenient external lead use.
Input Voltage: DC 6.5-12V; Output Voltage: DC 3.3V 5V; Input do not exceed 700mA, Locking ON / OFF Switch, no need to unplug the power adapter, LED Power Indicator indicated when the board is powered up.
Perfect protection - The proven Stoppwerk TS010 Stainless Steel door buffer reliably protects your wall from ugly scratches and dents with its extra-soft rubber.
Easy assembly - Thanks to the assembly accessories (fixing screws + dowels) as well as the easy-to-understand assembly, the silver door blocker can be easily attached using just one drill hole.
Perfect view - The Stoppwerk chrome-look door spyhole, with its large 200 degree wide angle, offers you a crystal-clear view and reliably protects your privacy thanks to the integrated cover cap.
Easy installation - The door spy hole comes with clear installation instructions and a video demonstration. Once a 16mm hole has been drilled, the front door viewer can be easily screwed in.
Perfect protection - The proven Stoppwerk TS014 Stainless Steel door buffer reliably protects your wall from ugly scratches and dents with its extra-soft rubber buffer.
Easy assembly - Thanks to the assembly accessories (fixing screws + dowels) as well as the easy-to-understand assembly, our door stoppers could be easily attached using just one drill hole.
Perfect protection - The proven Stoppwerk TS011 Stainless Steel door buffer reliably protects your wall from ugly scratches and dents with its extra-soft rubber.
Easy assembly - Thanks to the assembly accessories (fixing screws + dowels) as well as the easy-to-understand assembly, the decorative floor door stop can be easily attached using one drill hole.
Perfect protection - The Stoppwerk MS010 decorative Stainless Steel magnetic door holder reliably protects your wall from scratches and keeps your door open with an extra-Strong magnet.
Easy assembly - Thanks to the fully supplied assembly accessories (fixing screws + dowels) as well as the easy-to-understand assembly, the magnetic door hold can be easily attached.
Perfect protection - The proven Stoppwerk TS013 wall and floor door stop reliably protects your wall from ugly scratches and dents with its extra-soft rubber doorstop.
Easy assembly - Thanks to the assembly accessories (fixing screws + dowels) as well as the easy-to-understand assembly , the door wall protector can be easily attached using just one drill hole.
Perfect protection - The proven Stoppwerk TS016 Stainless Steel door buffer reliably protects your wall from ugly scratches and dents with its extra-soft rubber buffer.
Easy assembly - Thanks to the assembly accessories (fixing screws + dowels) as well as the easy-to-understand assembly , our door stoppers could be easily attached using just one drill hole.
Perfect protection - The Stoppwerk TS015 Stainless Steel door buffer reliably protects your wall from ugly scratches and dents. At the same time, your door is protected from damage thanks to the use of extra soft rubber.
Easy assembly - Thanks to the fully supplied assembly accessories (fixing screws + dowels) as well as the easy-to-understand assembly and video instructions, the door stop can be easily attached. A drill hole is required for floor mounting.
Perfect protection - The Stoppwerk TS012 Stainless Steel door buffer reliably protects your wall from ugly scratches and dents. At the same time, your door is protected from damage thanks to the use of extra soft rubber.
Easy assembly - Thanks to the fully supplied assembly accessories (fixing screws + dowels) as well as the easy-to-understand assembly and video instructions, the door stop can be easily attached. A drill hole is required for floor mounting.
Perfect protection - The Stoppwerk MS011 Stainless Steel magnetic door hold reliably protects your wall from scratches and keeps your door open with an extra-Strong magnet.
Easy assembly - Thanks to the fully supplied assembly accessories (fixing screws + dowels) as well as the easy-to-understand assembly and video instructions, the silver door catches can be easily attached.
The tag is lightweight, made of high quality plastics, sturdy and durable to use, just insert the included pin into the clothes and push it towards the inner hole of the security tag.
The clothing tags with grooved pin and cable will not easy to hurt clothes and other soft items,and the reusable square tag works with RF 8.2 MHz Frequency only.
UNIVERSAL & COMPATIBILITY Compatible with 4.5 6.5 inch Phones.(iPhone 13 Pro Max / 12 Pro / 12 / 11 Pro Max / 11 Pro / 11 / XR / XS Max / SE / 8 Plus / 8 / 7 Plus / 7 / Galaxy Note 8 / 9 / S8 Plus / S8 / S9 Plus / S9 / S10 / S21 / GPS devices / etc.
WORKS WITH OR WITHOUT CASE Your device may be installed with or without protective cases or covers fitted.