Size - thread size: m10 x 1.5 ; thread length: 25mm / 0.98"shank side width: 6mm / 0.24" ; total length: 79mm / 3.11"
Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Size - thread size: m10 x 1.5 ; thread length: 24mm / 0.94"shank side width: 6mm / 0.24" ; total length: 80mm / 3.15"
Material - Spiral Flute Drill Tap is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and threads in a variety of materials.The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Size - thread size: m12 x 1.75 ; thread length: 30mm / 1.18"shank side width: 7mm / 0.28" ; total length: 88mm / 3.46"
Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The titanium nitride (TiN) coating provides increased hardness, wear resistance and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation.
Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Spiral Flute Taps: Thread Size: M4 x 0.7 + 0.1; Square End Size: 4mm / 0.16". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Tap Size: 4-40 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
Material and Finish: High speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection.
Tap Size: M6 x 1 thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
Material and Finish: Cobalt high speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection and long service life.
Spiral Flute Taps: Thread Size: M8 x 1.25 + 0.1; Square End Size: 5mm / 0.2". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Material - Spiral Flute Taps is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and high-quality threads in a variety of materials. The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The titanium nitride (TiN) coating provides increased hardness, wear resistance, and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation during the tapping process.
IP67 Waterproof, the waterproof ring on the male connector is designed to be waterproof and dustproof. Using high-quality materials, the solar connector can resist UV rays and high temperatures.
[Easy to Install] This glass cabinet panel clip is well made, has the size , has no dents and chips on the edges, and the screws are sharp enough. What you need to do is drill holes in the cabinet or cabinet door and then use this glass fixing clips kit to fix the glass. It can be installed without guide hole, which is very convenient
[Premium Material] These glass fixing clips are made of plastic, thick and solid, not easy to break, and the transparent colors are easy to match, without affecting the appearance. The screw quality of the glass fixing clips kit is also good, there is no residual milling in the groove, and the surface finish is uniform
Ceramic Piezo Vibration Sensor An Analog Vibration Sensor Based On A Piezoelectric Ceramic Sheet Is An Inverse Process That Uses Piezoelectric Ceramics To Generate Vibration. When The Piezoelectric Ceramic Piece Vibrates, An Electrical Is Generated.
Vibration Sensor Special Sensor Expansion Boards Are In Combination, And Analog Ports Can Be Weakly Perceived. Vibrating Electricals Enable Interactive Work Related To Vibration, Such As Electronic Interactions.
【Principle】: Piezoelectric ceramics are made by the relative stress of the internal positive and negative charge centers under mechanical stress, which results in opposite bound charges, ie piezoelectric effects, and sensitive properties at both ends of the material.
【Properties】: Piezoelectric ceramics are functional ceramic materials that convert mechanical energy and electrical energy.
An analog vibration sensor based on a piezoelectric ceramic sheet is an inverseprocess that uses piezoelectric ceramics to generate vibration. When the piezoelectric ceramic piece vibrates, an electricalis generated.
Special sensor expansion boards are used in combination, and analog ports can be weakly perceived. Vibrating electricalenable interactive work related to vibration, such as electronic drum interactions.
Utilizing a 1027 mobile vibration motor, our product boasts an exceptional vibration effect. With a rotating mass motor that functions like a standard DC electric motor, it efficiently converts electrical current into mechanical force, propelling the motor.
Featuring MOS amplification drive and seamless compatibility with the digital port of for , our product allows for direct. Through PWM, users can regulate the vibration strength of the motor, providing flexible customization options.
Vibration Motor Using 1027e Phone Vibration Motor, The Vibration Effect Is.
Teur De Vibration Mos Amplification Drive, Can Be Directly Controlled By The Digital Port, Can Control The Vibration Strength Of The Motor Through Pwm.