[Installation size]: The pile rectifier bridge filter circuit design, can be a transformer or a DC power supply, power supply voltage 12-15V / 300mA. Installation dimensions: outer frame is 67.4MM * 56MM, screw hole installation size: 57MM * 50.5MM, Screws suitable for M3 screws
[Adjustable]: Adjustable level swings, can be compatible with all different types of table headboard, two 500 ohm blue potentiometers on the board can adjust the sensitivity of the two headboards separately, turn clockwise to increase the sensitivity
Price For: Pack of 1Order Unit: Each No. of Channels: 2Channels No. of Amplifiers: 1 Amplifier Bandwidth: 18MHz Operating Temperature Min: -40°C Operating Temperature Max: 125°C Supply Voltage Range: 2.5V to 5.5V Amplifier Case Style: MSOP No. of Pins: 10Pins Packaging: Each MSL: MSL 1 - Unlimited SVHC: No SVHC (17-Dec-2015)
The gain control range of this amplifier is default 80db (-25~55db), providing some common gain and bandwidth configuration parameters.
Module uses ±5V as power supply, magnetic beads and tantalum capacitor filter greatly reduce interference and power supply ripple.This module has GND test points for users to test conveniently.
【Wide Frequency Range】With a frequency range of 1MHz-6GHz, this 20dB gain block boosters module provides exceptional width to meet diverse RF application needs.
【High Linearity and Low Noise】Designed for superior performance, this boosters ensures high linearity with ultra low noise, delivering a clear and reliable signal.
[Installation size]: The pile rectifier bridge filter circuit design, can be a transformer or a DC power supply, power supply voltage 12-15V / 300mA. Installation dimensions: outer frame is 67.4MM * 56MM, screw hole installation size: 57MM * 50.5MM, Screws suitable for M3 screws
[Adjustable]: Adjustable level swings, can be compatible with all different types of table headboard, two 500 ohm blue potentiometers on the board can adjust the sensitivity of the two headboards separately, turn clockwise to increase the sensitivity
Price For: Pack of 1Order Unit: Each No. of Channels: 2Channels No. of Amplifiers: 1 Amplifier Bandwidth: 18MHz Operating Temperature Min: -40°C Operating Temperature Max: 125°C Supply Voltage Range: 2.5V to 5.5V Amplifier Case Style: MSOP No. of Pins: 10Pins Packaging: Each MSL: MSL 1 - Unlimited SVHC: No SVHC (17-Dec-2015)
The gain control range of this amplifier is default 80db (-25~55db), providing some common gain and bandwidth configuration parameters.
Module uses ±5V as power supply, magnetic beads and tantalum capacitor filter greatly reduce interference and power supply ripple.This module has GND test points for users to test conveniently.
【Wide Frequency Range】With a frequency range of 1MHz-6GHz, this 20dB gain block boosters module provides exceptional width to meet diverse RF application needs.
【High Linearity and Low Noise】Designed for superior performance, this boosters ensures high linearity with ultra low noise, delivering a clear and reliable signal.
✔️4 OUTPUT LNB: The Quad LNB from Labgear is designed to be easily mounted on a satellite dish, receiving low-level microwave signal from the satellite, amplifying it and changing the signals to a lower frequency band, to send down the cable to the indoor receiver. 4 outputs allows four separate receivers to be connected to a single Quad.
✔️EASY TO SETUP: This device simple to use all you need to do is align to the satellite of your choice then add your cable, connectors and your own receiver. Sky Quad LNB also have sliding cover to protect ‘F’ terminals. This LNB is fully weather resistant and is designed to withstand harsh environmental conditions
✔️ QUAD LNB: The GeoSync GK4LB is a Universal Quad LNB designed to work with standard satellite receivers and any satellite broadcasting in the Ku Band. 4 outputs allow you to feed signals to up to 4 satellite receivers or 2 PVR’s
✔️ PATENTED DESIGN: Like all GeoSync LNB's, it uses our patented feed horn design for higher frequency ranges. A Pull-down weather shield keeps rain away from cable connectors
✔️ WIDEBAND LNB: The GeoSync GW2LB Wideband LNB has been specifically designed for use in the UK with a 10.41GHz Local Oscillator to make it compatible with both the Sky-Q and Freesat 4K receivers
✔️ 2 OUTLETS: The GW2LB features two outlets, one for horizontally polarized signals and the other for vertically polarized signals. The receiver must be connected to both outputs
✔️ HYBRID LNB: Has been designed to allow you to provide signals to either a Sky-Q or Freesat 4K receiver whilst also delivering signals to up to 4 other standard satellite receivers from the same dish
✔️ OUTLETS: The 2 outlets at the front are UK Wideband for the new services and the 4 at the back are Universal for HD services
This LNB is a high-performance product with the lowest available noise figure to meet the need for superior reception under the edges of the satellite footprint edge.
Thanks to its innovative front-end architecture and superior components, this LNB offers a higher conversion gain with the lowest noise figure and best phase noise performance.
HYBRID TECHNOLOGY: Keep legacy satellite running alongside the new wideband format used by Sky and other broadcasters across Europe - a Hybrid LNB containing both a Wideband and a Quad
EASY TO INSTALL: A simple solution when both sets of signals come from the same satellite that solves a growing problem face by installers in the UK
✔️4 OUTPUT LNB: The Quad LNB from Labgear is designed to be easily mounted on a satellite dish, receiving low-level microwave signal from the satellite, amplifying it and changing the signals to a lower frequency band, to send down the cable to the indoor receiver. 4 outputs allows four separate receivers to be connected to a single Quad.
✔️EASY TO SETUP: This device simple to use all you need to do is align to the satellite of your choice then add your cable, connectors and your own receiver. Sky Quad LNB also have sliding cover to protect ‘F’ terminals. This LNB is fully weather resistant and is designed to withstand harsh environmental conditions
✔️ QUAD LNB: The GeoSync GK4LB is a Universal Quad LNB designed to work with standard satellite receivers and any satellite broadcasting in the Ku Band. 4 outputs allow you to feed signals to up to 4 satellite receivers or 2 PVR’s
✔️ PATENTED DESIGN: Like all GeoSync LNB's, it uses our patented feed horn design for higher frequency ranges. A Pull-down weather shield keeps rain away from cable connectors
✔️ WIDEBAND LNB: The GeoSync GW2LB Wideband LNB has been specifically designed for use in the UK with a 10.41GHz Local Oscillator to make it compatible with both the Sky-Q and Freesat 4K receivers
✔️ 2 OUTLETS: The GW2LB features two outlets, one for horizontally polarized signals and the other for vertically polarized signals. The receiver must be connected to both outputs
✔️ HYBRID LNB: Has been designed to allow you to provide signals to either a Sky-Q or Freesat 4K receiver whilst also delivering signals to up to 4 other standard satellite receivers from the same dish
✔️ OUTLETS: The 2 outlets at the front are UK Wideband for the new services and the 4 at the back are Universal for HD services
This LNB is a high-performance product with the lowest available noise figure to meet the need for superior reception under the edges of the satellite footprint edge.
Thanks to its innovative front-end architecture and superior components, this LNB offers a higher conversion gain with the lowest noise figure and best phase noise performance.
HYBRID TECHNOLOGY: Keep legacy satellite running alongside the new wideband format used by Sky and other broadcasters across Europe - a Hybrid LNB containing both a Wideband and a Quad
EASY TO INSTALL: A simple solution when both sets of signals come from the same satellite that solves a growing problem face by installers in the UK