LA1010 is a logic analyzer product with high cost performance. It has 16 input channels and the sample rate is up to 100MHz. Along with the PC software KingstVIS.
16 channels of digital signal could be sampled at the same time, and then they could be converted to digital waveform and displayed on the PC screen.
Multi-platform Support: The DSLogic Analyzers compatible with multiple platforms, providing versatility and for data analysis and troubleshooting
Dual Mode Support: With dual mode support, the DSLogic Analyzer offers both stream mode for long data collection time and buffer mode for high sampling rate, giving you flexibility for different analysis needs
Multi-platform Support: The DSLogic Analyzers compatible with multiple platforms, providing versatility and for data analysis and troubleshooting
Dual Mode Support: With dual mode support, the DSLogic Analyzer offers both stream mode for long data collection time and buffer mode for high sampling rate, giving you flexibility for different analysis needs
Application: Due to the high precision and stable frequency of the DDS, it is also very suitable for the scan time calibration factor of the oscilloscope.
Multi Purpose: The rectangular wave output is also suitable for oscilloscope attenuation links and probe pulse adjustment.
【Three-channel】Three-channel function / arbitrary waveform generator is a set of signal generator, arbitrary waveform generator, pulse signal generator, four-channel TTL signal generator, VCO, frequency sweeper, counter and frequency meter, etc.
【DDS】The instrument uses DDS direct digital synthesis technology to produce accurate, stable and low-distortion output signals. All parameters are calibrated by internal procedures. All software of the instrument is equipped as standard.
The instrument uses 14-bit high-speed D/A converter chip (5Vpp output quantization error is less than 1mV), 250MSa/s sample rate, 14bits vertical resolution.
Fully independent dual-channel output (equivalent to two independent signal sources), able to work synchronously, and the phase difference can be accurately adjusted;
【HIGH ACCURACY】This digital oscilloscope signal generator adopts dual-channel DDS signal and TTL electric level output to generate precise, stable and low distortion output signal. The large‑scale integrated circuit makes signal stability be greatly strengthened. Frequency output of Sine wave can be up to 30MHz. 266MSa/S sampling rate. It has 60 positions for saving user-defined waveform. Waveform Length of each one is 2048.
【WAVEFORM TYPES】This signal generator counter supports sine waves, square waves, pulse waves (adjustable duty cycle, pulse width and cycle time can be accurately adjusted), triangular waves, partial sine waves, CMOS waves, DC level (set the DC amplitude by adjusting the offset), half waves, full waves, positive staircase waves, reverse staircase waves, noise waves and 60 user-defined waveforms.
【Easy to Use】The DDS function generator has simple operation panel, simple and intuitive operation. Independent control switch for easy control.
【with Shortcut Keys】The shortcut keys of the frequency counter made of silicone material not only greatly simplify the operation steps, but also feel comfortable.
UDB1000 series is DDS signal generator based on direct digital synthesis (DDS) technology, are deigned by adopting FPGA,it has the characters of high stability and low distortion ect,one channel output,one channel TTL output, external frequency measurement, counter.
1HZ-500KHZ DDS signal generator is small but has many functions, easy to operate and carry. The power supply can be either AC/DC adaptor or a battery.
It can be used with oscilloscope to test and debug electronic circuit, the frequency response of audio amplifier and impulse response,It also can calibrate the sweep time factor of oscilloscope.
𝐅𝐮𝐧𝐜𝐭𝐢𝐨𝐧 𝐒𝐢𝐠𝐧𝐚𝐥 𝐆𝐞𝐧𝐞𝐫𝐚𝐭𝐨𝐫 : Built in DDS Function Signal Generator,14 standard signals (@ 2.5vpp), including sine wave, square wave, triangle wave, ect. [Only the Frequency is adjustable]