Keyestudio bbc microbit
1-10 of 400 results

DIYmalls VK-162 Remote Mount USB GPS Dongle G-Mouse Navigation External GPS Receiver Antenna for Raspberry Pi Linux Window Google Earth

• VK-162 gps is compatible with raspberry pi linux, and windows, NOT support android and ios system
• You need to install driver before use this gps usb on windows but plug and play for linux.

DIYmalls Load Cell 5 kg Weight Sensor + HX711 AD Amplifier Module for Arduino Raspberry Pi (5kg)

• -The weight sensor cannot be used directly with the GPIOs of RPi or other MCUs. The HX711 breakout board is required, which is an ADC+PGA specially design for load cells.
• -Load sensor connection with hx711 board: Red to E+, Black to E-, Green to A+, White to A-

DIYmalls 868 ESP32 LoRa OLED Board V3 SX1262 Type-C + +LoRa V3 Case + 868MHz Antenna for Arduino LoRawan IOT (Pack of 2), not Compatible with LoRa 32 V2

• -The newly LoRa V3 version has the same pin sequence and function as the V2 version. But the V3 chage micro USB port to be type C.
• -You can power 868 lora board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, type C 5V power is recommended.

DIYmalls 868MHz LoRa ESP32 OLED Board V3 Type-C 8MB Flash SX1262 + LoRa Antenna IPX 2dBi for Arduino LoRawan IOT (Pack of 2), not Compatible with Heltec LoRa 32 V2

• LoRa board 868mhz comes unassembled, soldering required by you, not equipped with lithium battery.
• You will receive 2pcs 868MHz esp32 lora oled board V3, 2pcs 868mhz lora antenna,and 2pcs 1.25mm cable.

DIYmalls 3V 2 AAA Battery Holder Pack Case Cover Storage Box with on/off Switch PH2.0 Male Connector Cable 14cm for Arduino Microbit (Pack of 5)

• Designed for AAA battery and comes without batteries, and it's compatible with BBC Micro:bit board.
• Microbit battery pack switch function: AAA battery holder with ON/OFF switch ; Recessed designed On-Off Switch, more safe, more durable.

DIYmalls G72 G-Mouse USB GPS Receiver Module GNSS GPS Dongle NMEA 0183 w/PPS LED Indicator for Raspberry Pi Linux Window, not for Android, not for IOS

• -Default GPS+Beidou, but it's possible to change to be GPS+Glonass or Glonass+Beidou in u center software.
• -g72 gps only work on a USB 2 port and cable extension (5 metres), do not try it on a USB 3 port or extension cable.

DIYmalls 4 Cell 6V AA Battery Holder Case Cover Storage Box w/ 2P FUT J Plug Connector for Flysky Receiver RC Servo Tester(Pack of 4)

• -Designed for 4pcs AA battery.
• -Compatible with Flysky receiver & servo tester.

DIYmalls 2 Cell 3V AA Battery Holder Case Storage Box with ON/Off Switch Alligator Clip Wire Cable 130mm (Pack of 4)

• -You will receive 4pcs aa battery holder 2 cells.
• -Battery NOT included.

DIYmalls Feetech FS90R Continuous Rotation Micro RC Servo 360 Motor Analog 6V for Arduino Microbit (Pack of 4)

• You will only receive 4pcs continuous rotation servo with accessories, no other products..
• Feetech fs90r servo is widely used for microbit, drone, smart car, robot etc.

DIYmalls G71 G-mouse USB GPS Dongle Receiver Module for Raspberry Pi Google Earth Windows, Compatible with VK-172 GPS

• -g71 gps usb support Windows Raspberry Pi and Google earth, NOT compatible with IOS Android.
• -g71 gmouse usb gps is plug and play for Raspberry Pi (ensure your copy of Raspbian is up to date), but you need to install driver to make it work with Windows.

DIYmalls VK-162 Remote Mount USB GPS Dongle G-Mouse Navigation External GPS Receiver Antenna for Raspberry Pi Linux Window Google Earth

• VK-162 gps is compatible with raspberry pi linux, and windows, NOT support android and ios system
• You need to install driver before use this gps usb on windows but plug and play for linux.

DIYmalls Load Cell 5 kg Weight Sensor + HX711 AD Amplifier Module for Arduino Raspberry Pi (5kg)

• -The weight sensor cannot be used directly with the GPIOs of RPi or other MCUs. The HX711 breakout board is required, which is an ADC+PGA specially design for load cells.
• -Load sensor connection with hx711 board: Red to E+, Black to E-, Green to A+, White to A-

DIYmalls 868 ESP32 LoRa OLED Board V3 SX1262 Type-C + +LoRa V3 Case + 868MHz Antenna for Arduino LoRawan IOT (Pack of 2), not Compatible with LoRa 32 V2

• -The newly LoRa V3 version has the same pin sequence and function as the V2 version. But the V3 chage micro USB port to be type C.
• -You can power 868 lora board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, type C 5V power is recommended.

DIYmalls 868MHz LoRa ESP32 OLED Board V3 Type-C 8MB Flash SX1262 + LoRa Antenna IPX 2dBi for Arduino LoRawan IOT (Pack of 2), not Compatible with Heltec LoRa 32 V2

• LoRa board 868mhz comes unassembled, soldering required by you, not equipped with lithium battery.
• You will receive 2pcs 868MHz esp32 lora oled board V3, 2pcs 868mhz lora antenna,and 2pcs 1.25mm cable.

DIYmalls 3V 2 AAA Battery Holder Pack Case Cover Storage Box with on/off Switch PH2.0 Male Connector Cable 14cm for Arduino Microbit (Pack of 5)

• Designed for AAA battery and comes without batteries, and it's compatible with BBC Micro:bit board.
• Microbit battery pack switch function: AAA battery holder with ON/OFF switch ; Recessed designed On-Off Switch, more safe, more durable.

DIYmalls G72 G-Mouse USB GPS Receiver Module GNSS GPS Dongle NMEA 0183 w/PPS LED Indicator for Raspberry Pi Linux Window, not for Android, not for IOS

• -Default GPS+Beidou, but it's possible to change to be GPS+Glonass or Glonass+Beidou in u center software.
• -g72 gps only work on a USB 2 port and cable extension (5 metres), do not try it on a USB 3 port or extension cable.

DIYmalls 4 Cell 6V AA Battery Holder Case Cover Storage Box w/ 2P FUT J Plug Connector for Flysky Receiver RC Servo Tester(Pack of 4)

• -Designed for 4pcs AA battery.
• -Compatible with Flysky receiver & servo tester.

DIYmalls 2 Cell 3V AA Battery Holder Case Storage Box with ON/Off Switch Alligator Clip Wire Cable 130mm (Pack of 4)

• -You will receive 4pcs aa battery holder 2 cells.
• -Battery NOT included.

DIYmalls Feetech FS90R Continuous Rotation Micro RC Servo 360 Motor Analog 6V for Arduino Microbit (Pack of 4)

• You will only receive 4pcs continuous rotation servo with accessories, no other products..
• Feetech fs90r servo is widely used for microbit, drone, smart car, robot etc.

DIYmalls G71 G-mouse USB GPS Dongle Receiver Module for Raspberry Pi Google Earth Windows, Compatible with VK-172 GPS

• -g71 gps usb support Windows Raspberry Pi and Google earth, NOT compatible with IOS Android.
• -g71 gmouse usb gps is plug and play for Raspberry Pi (ensure your copy of Raspbian is up to date), but you need to install driver to make it work with Windows.

KEYESTUDIO BBC Micro:bit (Microbit V2 included) Starter Kit Programming Educational STEM Learning DIY Kit

• KEYESTUDIO BBC micro:bit V2 go is the latest revision of everyone’s favourite powerful palm-sized, and fully programmable computer. Conceived by the BBC to encourage children to get actively involved in writing software and building new things that will be controlled by it.
• BBC micro:bit v2 is designed to be completely familiar to anyone who has used the original device. It’s the same size, shape, looks very similar, and works in the same way. Every program that could run on a micro:bit version 1 can be re-built to run on the latest revision.

KEYESTUDIO BBC Micro:bit V2.2 GO Kit, STEM Starter Kit for Microbit, Development Board for Coding and Programming, Barebone PCs

• Microbit V2.2 by changing the 'interface processor' of the micro:bit V2. This is the part of the micro:bit responsible for managing USB communication, e.g. it displays the MICROBIT unit and helps you program the device. It runs the micro:bit firmware. The chip that runs the user programs has not changed. There are no changes to the user experience, functions or behaviour of the micro:bit.
• KEYESTUDIO micro:bit V2.2 go is a pocket computer that can be coded, customised and controlled for the implementation of digital ideas and games. Measuring just 4x5 cm and featuring a fun and easy-to-use design, users can create anything from games and animations to clever stories at school, at home or anywhere - all it takes is imagination and creativity.

KEYESTUDIO ESP32 WROOM Development Board, Support WiFi and Bluetooth, Compatible with Arduino

• This is a universal WIFI plus Bluetooth development board based on ESP32, integrated with ESP32-WOROOM-32 module and compatible with Arduino.
• It has a hall sensor, high-speed SDIO/SPI, UART, I2S as well as I2C. Furthermore, equipped with freeRTOS operating system, which is quite suitable for the Internet of things and smart home.

KEYETSUDIO 4WD Smart Coding Robot Car Kit for Arduino, Arduino Starter Kit, DIY Electronic Kit for Adult Teen, 15+, Programmable Robotic Project

• 【KEYESTUDIO Robot Kit for Arduino】This smart car is designed for arduino education. It packs a total of 17 projects from easy to difficult to help beginners gain hands-on experience with knowledge about programming, electronics assembly, and robotics.
• 【Learn and Fun】The robot car has functions such as obstacle avoidance, following, infrared remote control, Bluetooth control, limit with circles, gravity control, and facial emoji display. to achieve full enjoyment in the process of learning.

KEYESTUDIO Basic Starter Kit for Raspberry Pi Pico，MicroPython C/C++ 21 Lessons Easy to Learn Pico Programming, Fun for Beginners，Barebone PCs

• 【Basic Raspberry Pi Pico Kit】 This kit has everything you need to start learning how to use raspberry pi pico. It's very good for beginners and hobbyists.
• 【Pre-soldered Raspberry Pi Pico Included】The Raspberry Pi Pico is a high-performance microcontroller board with flexible digital that features the RP2040 with a dual-core ARM Cortex-M0+ processor.

KEYESTUDIO Smart Robot Car Kit V2.0 for Arduino IDE, Electronics Starter Kit, with Line Tracking Module, Ultrasonic Sensor, IR Module, Educational Robotic Kit for Teen Adult, Science Coding Gift

• ➤TWO-DRIVE TRACKED VEHICLE THAT ANYONE CAN MAKE!: No welding is required, compatible arduino programming platforms, which is easy to get started. Please note users need to prepare two 18650 batteries by yourselves.
• ➤STEM EDUCATION: Mini Tank Robot brings children and people closer to technology, they learn the logical connection between code and action, understand how its components, and electronics work.Science gifts for teen adults

My Love Life & Other Disasters: Poems

KEYESTUDIO BBC Microbit V2.2 Starter Kit, Micro bit Car Kit, Electronic Programming Kit for Teens Adults, Stem Gift, Barebone PCs

• 【Multiple Functions】 The BBC Microbit car has multiple functions. It can make a wireless remote control, follow the light, avoid an obstacle, follow a black line, light up coloured lights, can also be used with your building blocks and other functions you can create yourself.
• 【Makecode and Python Learning】The guide that comes with the kit has 19 projects. It's suited to beginners, particularly young people in education.

Raspberry Pi 4-Channel Relay Hat Shield Module 5V DCAC KEYESTUDIO Expansion Board for Raspberry Pi 4/A+/B+/Pi 2 Model B/Pi 3 Model B

• This shield uses SONGLE relay, providing 4-channel input and output. And works with Raspberry Pi A+/B+/Pi 2 Model B/Pi 3 Model B
• All the channels can control up to 24V DC or 250V AC on 10 A

KEYESTUDIO 37 in 1 Sensor Modules Kit, Compatible with Arduino UN0 R3 Mega, Raspberry Pi 4, Electronic Starter Kit Suitable for Beginners

• 【37 in 1 Sensors Kit】KEYESTUDIO sensor kit comes with 37 basic sensors and modules.Such as active buzzer module, 5V relay module, temperature and humidity module and so on. It is compatible for Arduino and Raspberry Pi.
• We have detailed tutorial( included introduction, wiring diagram, test code, driver installation, Example Projects.Step by step to explain how to use in our wiki page.【Tutorial download:→ https://fs.keyestudio.com/KT0193F】

KEYESTUDIO BBC Micro:bit (Microbit V2 included) Starter Kit Programming Educational STEM Learning DIY Kit

• KEYESTUDIO BBC micro:bit V2 go is the latest revision of everyone’s favourite powerful palm-sized, and fully programmable computer. Conceived by the BBC to encourage children to get actively involved in writing software and building new things that will be controlled by it.
• BBC micro:bit v2 is designed to be completely familiar to anyone who has used the original device. It’s the same size, shape, looks very similar, and works in the same way. Every program that could run on a micro:bit version 1 can be re-built to run on the latest revision.

KEYESTUDIO BBC Micro:bit V2.2 GO Kit, STEM Starter Kit for Microbit, Development Board for Coding and Programming, Barebone PCs

• Microbit V2.2 by changing the 'interface processor' of the micro:bit V2. This is the part of the micro:bit responsible for managing USB communication, e.g. it displays the MICROBIT unit and helps you program the device. It runs the micro:bit firmware. The chip that runs the user programs has not changed. There are no changes to the user experience, functions or behaviour of the micro:bit.
• KEYESTUDIO micro:bit V2.2 go is a pocket computer that can be coded, customised and controlled for the implementation of digital ideas and games. Measuring just 4x5 cm and featuring a fun and easy-to-use design, users can create anything from games and animations to clever stories at school, at home or anywhere - all it takes is imagination and creativity.

KEYESTUDIO ESP32 WROOM Development Board, Support WiFi and Bluetooth, Compatible with Arduino

• This is a universal WIFI plus Bluetooth development board based on ESP32, integrated with ESP32-WOROOM-32 module and compatible with Arduino.
• It has a hall sensor, high-speed SDIO/SPI, UART, I2S as well as I2C. Furthermore, equipped with freeRTOS operating system, which is quite suitable for the Internet of things and smart home.

KEYETSUDIO 4WD Smart Coding Robot Car Kit for Arduino, Arduino Starter Kit, DIY Electronic Kit for Adult Teen, 15+, Programmable Robotic Project

• 【KEYESTUDIO Robot Kit for Arduino】This smart car is designed for arduino education. It packs a total of 17 projects from easy to difficult to help beginners gain hands-on experience with knowledge about programming, electronics assembly, and robotics.
• 【Learn and Fun】The robot car has functions such as obstacle avoidance, following, infrared remote control, Bluetooth control, limit with circles, gravity control, and facial emoji display. to achieve full enjoyment in the process of learning.

KEYESTUDIO Basic Starter Kit for Raspberry Pi Pico，MicroPython C/C++ 21 Lessons Easy to Learn Pico Programming, Fun for Beginners，Barebone PCs

• 【Basic Raspberry Pi Pico Kit】 This kit has everything you need to start learning how to use raspberry pi pico. It's very good for beginners and hobbyists.
• 【Pre-soldered Raspberry Pi Pico Included】The Raspberry Pi Pico is a high-performance microcontroller board with flexible digital that features the RP2040 with a dual-core ARM Cortex-M0+ processor.

KEYESTUDIO Smart Robot Car Kit V2.0 for Arduino IDE, Electronics Starter Kit, with Line Tracking Module, Ultrasonic Sensor, IR Module, Educational Robotic Kit for Teen Adult, Science Coding Gift

• ➤TWO-DRIVE TRACKED VEHICLE THAT ANYONE CAN MAKE!: No welding is required, compatible arduino programming platforms, which is easy to get started. Please note users need to prepare two 18650 batteries by yourselves.
• ➤STEM EDUCATION: Mini Tank Robot brings children and people closer to technology, they learn the logical connection between code and action, understand how its components, and electronics work.Science gifts for teen adults

My Love Life & Other Disasters: Poems

KEYESTUDIO BBC Microbit V2.2 Starter Kit, Micro bit Car Kit, Electronic Programming Kit for Teens Adults, Stem Gift, Barebone PCs

• 【Multiple Functions】 The BBC Microbit car has multiple functions. It can make a wireless remote control, follow the light, avoid an obstacle, follow a black line, light up coloured lights, can also be used with your building blocks and other functions you can create yourself.
• 【Makecode and Python Learning】The guide that comes with the kit has 19 projects. It's suited to beginners, particularly young people in education.

Raspberry Pi 4-Channel Relay Hat Shield Module 5V DCAC KEYESTUDIO Expansion Board for Raspberry Pi 4/A+/B+/Pi 2 Model B/Pi 3 Model B

• This shield uses SONGLE relay, providing 4-channel input and output. And works with Raspberry Pi A+/B+/Pi 2 Model B/Pi 3 Model B
• All the channels can control up to 24V DC or 250V AC on 10 A

KEYESTUDIO 37 in 1 Sensor Modules Kit, Compatible with Arduino UN0 R3 Mega, Raspberry Pi 4, Electronic Starter Kit Suitable for Beginners

• 【37 in 1 Sensors Kit】KEYESTUDIO sensor kit comes with 37 basic sensors and modules.Such as active buzzer module, 5V relay module, temperature and humidity module and so on. It is compatible for Arduino and Raspberry Pi.
• We have detailed tutorial( included introduction, wiring diagram, test code, driver installation, Example Projects.Step by step to explain how to use in our wiki page.【Tutorial download:→ https://fs.keyestudio.com/KT0193F】