Liqui moly screw
2-10 of 400 results
Nsgmxt
NSGMXT Pair Rear Brake Calipers Left & Right Compatible with Zafira/Zafira Family FWD B A05 FWD Mk II B A05 Diesel Petrol MPV Zafira 93183696 93187068 93183697 93187069
£68.00- Replacement Part Number: Left Side: 93183696, 93187068, 5542451, 5542466, 4193183696;
- Replacement Part Number: Right Side: 93183697, 93187069, 5542452, 5542467, 4193183697.
Generic
A4 Photo Blueprint Morris 8 Tourer Cabriolet 1935
£8.98- A4 (8.25 x 11.75 inch / 21cmx30cm) or 10x8 inch Photo Print
- Printed on to 270gsm high quality photo GLOSS card, borderless (to the edge) finish
Marhynchus
500Pcs Head Screw, CM Head Screw Sorting Kit, 10 Specifications, With Black Screwdriver Fastener Hardware
£4.33- TRANSPARENT STORAGE BOX: This collection is arranged in a transparent storage box by size for quick access and protection.
- HIGH-QUALITY CARBON STEEL MATERIAL: High-quality black carbon steel material, durable, environmentally friendly, and pollution-free.
Frankberg
Frankberg Brake Caliper Rear Right Compatible with Daily III Bus 2.8L-3.0L 1999-2006 Daily III Box 2.3L-3.0L 1999-2007 Daily IV Box 2.3L-3.0L 2006-2012
£59.99- 【Vehicle Fitment】Compatible with Daily III Bus 2.8L-3.0L 1999-2006, Daily III Box 2.3L-3.0L 1999-2007, Daily III PRITSCHE/CHASSIS 2.3L-3.0L 1999-2006, Daily IV Box 2.3L-3.0L 2006-2012
- 【Vehicle Fitment】Compatible with Daily IV Kipper 3.0L 2006-2011, Daily V Box 2.3L-3.0L 2011-2014, Cabstar F24 2.5L 2006-2012, Master II Box FD 3.0L 2005-2020
Healeved
Healeved 10pcs Replacement Rubber Tips for Glass Running Pliers and Key Fob Pliers Hardware Install and Stained Glass Work Supplies and Tools Accessories
£8.09- Practical glass pliers rubber tips are suitable for all kinds of glass broken scenes, such as household decoration and construction sites, etc.
- Using rubber materials, the glass pliers tips are not easy to deform or break, reusable for long time.
Hyuduo
Crossed Screw 500Pcs Flat Head Cross SelfTapping Screws Set 410 Stainless Steel Phillips Drive Thread Fastener Fittings M4.2x25mm Screws
£17.69- Application: It can be knocked into various square tubes, colored tiles and various iron plates, and its hardness is about HV300 degrees.
- Practical Tool: Features deep thread, uniform pitch, stable force and good tightening force, dependable to use. Suitable for square tube, color steel tile and iron plate with hardness around HV300.
Frankberg
Frankberg 2x Brake Calipers Front Left and Right Compatible with A-Klasse W168 A140 1.4L 1.6L 1997-2004 A-Klasse W168 A160 1.6L 1997-2004 Replace# 1684200283 1684200383
£69.99 (£35.00 / count)- 【Vehicle Fitment】Compatible with A-Klasse W168 A140 1.4L 1.6L 1997-2004, A-Klasse W168 A160 1.6L 1997-2004
- 【Note】For A-Klasse W168 A140 Hatchback with Long Wheelbase
Generic
DISCOVERY 1 FRONT OR REAR BRAKE CALIPER BOLTS BOLT SET X4 SYP500090
£9.95- DISCOVERY 1 FRONT OR REAR BRAKE CALIPER BOLTS BOLT SET X4 SYP500090
Generic
UNIVERSAL CAR REAR DRIVE DISC BRAKE PISTON REMOVER - VERSATILE MULTIFUNCTIONAL TOOL FOR BRAKE SYSTEM MAINTENANCE
£6.89- [VERSATILE TOOL FOR BRAKE SYSTEM MAINTENANCE] Replace rear disc brake pads or rotors with ease using this multifunctional disc brake piston remover.
- [ROBUST CONSTRUCTION] Made of durable carbon steel for added strength and longevity.
Aqxreight
Multifunctional Disc Brake Piston Remover for Car Rear Drive, Universal 3/8in Brake Piston Spreader
£5.80- [IDEAL BRAKE SYSTEM MAINTENANCE TOOL] Whether you're replacing your rear disc brake pads or rotors, this multifunctional disc brake piston remover is the perfect tool for the job. Its sturdy construction and ease of use make it a must-have for any automotive enthusiast.
- [SIZE AND FUNCTION] With a compact size of 1 x 1 x 1in and a medium flight of 0.4in, this disc brake piston remover offers 6 different surfaces for various purposes. It is suitable for different types of brake pumps and is compatible with 3/8in drive ratchets and extension bars.
Nsgmxt
NSGMXT Pair Rear Brake Calipers Left & Right Compatible with Zafira/Zafira Family FWD B A05 FWD Mk II B A05 Diesel Petrol MPV Zafira 93183696 93187068 93183697 93187069
£68.00- Replacement Part Number: Left Side: 93183696, 93187068, 5542451, 5542466, 4193183696;
- Replacement Part Number: Right Side: 93183697, 93187069, 5542452, 5542467, 4193183697.
Generic
A4 Photo Blueprint Morris 8 Tourer Cabriolet 1935
£8.98- A4 (8.25 x 11.75 inch / 21cmx30cm) or 10x8 inch Photo Print
- Printed on to 270gsm high quality photo GLOSS card, borderless (to the edge) finish
Marhynchus
500Pcs Head Screw, CM Head Screw Sorting Kit, 10 Specifications, With Black Screwdriver Fastener Hardware
£4.33- TRANSPARENT STORAGE BOX: This collection is arranged in a transparent storage box by size for quick access and protection.
- HIGH-QUALITY CARBON STEEL MATERIAL: High-quality black carbon steel material, durable, environmentally friendly, and pollution-free.
Frankberg
Frankberg Brake Caliper Rear Right Compatible with Daily III Bus 2.8L-3.0L 1999-2006 Daily III Box 2.3L-3.0L 1999-2007 Daily IV Box 2.3L-3.0L 2006-2012
£59.99- 【Vehicle Fitment】Compatible with Daily III Bus 2.8L-3.0L 1999-2006, Daily III Box 2.3L-3.0L 1999-2007, Daily III PRITSCHE/CHASSIS 2.3L-3.0L 1999-2006, Daily IV Box 2.3L-3.0L 2006-2012
- 【Vehicle Fitment】Compatible with Daily IV Kipper 3.0L 2006-2011, Daily V Box 2.3L-3.0L 2011-2014, Cabstar F24 2.5L 2006-2012, Master II Box FD 3.0L 2005-2020
Healeved
Healeved 10pcs Replacement Rubber Tips for Glass Running Pliers and Key Fob Pliers Hardware Install and Stained Glass Work Supplies and Tools Accessories
£8.09- Practical glass pliers rubber tips are suitable for all kinds of glass broken scenes, such as household decoration and construction sites, etc.
- Using rubber materials, the glass pliers tips are not easy to deform or break, reusable for long time.
Hyuduo
Crossed Screw 500Pcs Flat Head Cross SelfTapping Screws Set 410 Stainless Steel Phillips Drive Thread Fastener Fittings M4.2x25mm Screws
£17.69- Application: It can be knocked into various square tubes, colored tiles and various iron plates, and its hardness is about HV300 degrees.
- Practical Tool: Features deep thread, uniform pitch, stable force and good tightening force, dependable to use. Suitable for square tube, color steel tile and iron plate with hardness around HV300.
Frankberg
Frankberg 2x Brake Calipers Front Left and Right Compatible with A-Klasse W168 A140 1.4L 1.6L 1997-2004 A-Klasse W168 A160 1.6L 1997-2004 Replace# 1684200283 1684200383
£69.99 (£35.00 / count)- 【Vehicle Fitment】Compatible with A-Klasse W168 A140 1.4L 1.6L 1997-2004, A-Klasse W168 A160 1.6L 1997-2004
- 【Note】For A-Klasse W168 A140 Hatchback with Long Wheelbase
Generic
DISCOVERY 1 FRONT OR REAR BRAKE CALIPER BOLTS BOLT SET X4 SYP500090
£9.95- DISCOVERY 1 FRONT OR REAR BRAKE CALIPER BOLTS BOLT SET X4 SYP500090
Generic
UNIVERSAL CAR REAR DRIVE DISC BRAKE PISTON REMOVER - VERSATILE MULTIFUNCTIONAL TOOL FOR BRAKE SYSTEM MAINTENANCE
£6.89- [VERSATILE TOOL FOR BRAKE SYSTEM MAINTENANCE] Replace rear disc brake pads or rotors with ease using this multifunctional disc brake piston remover.
- [ROBUST CONSTRUCTION] Made of durable carbon steel for added strength and longevity.
Aqxreight
Multifunctional Disc Brake Piston Remover for Car Rear Drive, Universal 3/8in Brake Piston Spreader
£5.80- [IDEAL BRAKE SYSTEM MAINTENANCE TOOL] Whether you're replacing your rear disc brake pads or rotors, this multifunctional disc brake piston remover is the perfect tool for the job. Its sturdy construction and ease of use make it a must-have for any automotive enthusiast.
- [SIZE AND FUNCTION] With a compact size of 1 x 1 x 1in and a medium flight of 0.4in, this disc brake piston remover offers 6 different surfaces for various purposes. It is suitable for different types of brake pumps and is compatible with 3/8in drive ratchets and extension bars.
Sourcing Map
sourcing map Spiral Flute Drill Tap M10 x 1.5 M35 High Speed Steel(HSS) Aluminum Titanium Nitride (AlTiN) Coated Thread Milling Taps Machine Screw Drilling for Lathes Steel Cutting, Bronze
£7.49- Size - thread size: m10 x 1.5 ; thread length: 25mm / 0.98"shank side width: 6mm / 0.24" ; total length: 79mm / 3.11"
- Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map Spiral Flute Drill Tap M10 x 1.5 High Speed Steel 6542 Aluminum Titanium Nitride (AlTiN) Coated Thread Milling Taps Metric Machine for Lathes Steel Cutting, Black
£7.49- Size - thread size: m10 x 1.5 ; thread length: 24mm / 0.94"shank side width: 6mm / 0.24" ; total length: 80mm / 3.15"
- Material - Spiral Flute Drill Tap is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and threads in a variety of materials.The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map Spiral Flute Drill Tap M12 x 1.75 M35 High Speed Steel(HSS) Titanium Nitride Coated Thread Milling Taps Metric Machine Screw Drilling for Lathes Steel Cutting, Blue
£8.49- Size - thread size: m12 x 1.75 ; thread length: 30mm / 1.18"shank side width: 7mm / 0.28" ; total length: 88mm / 3.46"
- Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The titanium nitride (TiN) coating provides increased hardness, wear resistance and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation.
Sourcing Map
sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) Aluminum Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue
£12.99 (£2.60 / count)- Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 13mm (0.51") / 15mm (0.59") / 19mm (0.75") / 23mm (0.91") / 23mm (0.91") ; total length: 51mm (2.01") / 57mm (2.24") / 62mm (2.44") / 71mm (2.8") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3mm (0.12") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
- Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map Spiral Flute Taps, M4 x 0.7 + 0.1 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap
£8.99- Spiral Flute Taps: Thread Size: M4 x 0.7 + 0.1; Square End Size: 4mm / 0.16". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
- Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Sourcing Map
sourcing map Spiral Flute Threading Tap 4-40 UNC, HSS (High Speed Steel) Titanium Plated Machine Thread Screw Tap 3 Flutes Tapping Tool H2 Tolerance
£6.49- Tap Size: 4-40 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
- Material and Finish: High speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection.
Sourcing Map
sourcing map Spiral Flute Thread Tap M6 x 1, Metric Cobalt HSS (High Speed Steel) Titanium Plated Machine Threading Tap H2 Tolerance Grade
£9.99- Tap Size: M6 x 1 thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
- Material and Finish: Cobalt high speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection and long service life.
Sourcing Map
sourcing map Spiral Flute Taps, M8 x 1.25 + 0.1 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap
£12.99- Spiral Flute Taps: Thread Size: M8 x 1.25 + 0.1; Square End Size: 5mm / 0.2". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
- Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Sourcing Map
sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) 6542 Aluminum Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue
£12.99 (£2.60 / count)- Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 11mm (0.43") / 15mm (0.59") / 19mm (0.75") / 23mm (0.91") / 23mm (0.91") ; total length: 51mm (2.01") / 57mm (2.24") / 62mm (2.44") / 71mm (2.8") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3mm (0.12") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
- Material - Spiral Flute Taps is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and high-quality threads in a variety of materials. The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue
£12.99 (£2.60 / count)- Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 12mm (0.47") / 15mm (0.59") / 19mm (0.75") / 22mm (0.87") / 23mm (0.91") ; total length: 52mm (2.05") / 56mm (2.2") / 62mm (2.44") / 70mm (2.76") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3.2mm (0.13") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
- Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The titanium nitride (TiN) coating provides increased hardness, wear resistance, and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation during the tapping process.
Sourcing Map
sourcing map Spiral Flute Drill Tap M10 x 1.5 M35 High Speed Steel(HSS) Aluminum Titanium Nitride (AlTiN) Coated Thread Milling Taps Machine Screw Drilling for Lathes Steel Cutting, Bronze
£7.49- Size - thread size: m10 x 1.5 ; thread length: 25mm / 0.98"shank side width: 6mm / 0.24" ; total length: 79mm / 3.11"
- Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map Spiral Flute Drill Tap M10 x 1.5 High Speed Steel 6542 Aluminum Titanium Nitride (AlTiN) Coated Thread Milling Taps Metric Machine for Lathes Steel Cutting, Black
£7.49- Size - thread size: m10 x 1.5 ; thread length: 24mm / 0.94"shank side width: 6mm / 0.24" ; total length: 80mm / 3.15"
- Material - Spiral Flute Drill Tap is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and threads in a variety of materials.The Aluminum Titanium Nitride (AlTiN) coating can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map Spiral Flute Drill Tap M12 x 1.75 M35 High Speed Steel(HSS) Titanium Nitride Coated Thread Milling Taps Metric Machine Screw Drilling for Lathes Steel Cutting, Blue
£8.49- Size - thread size: m12 x 1.75 ; thread length: 30mm / 1.18"shank side width: 7mm / 0.28" ; total length: 88mm / 3.46"
- Material - Spiral Flute Drill Tap is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength and heat resistance for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2).The titanium nitride (TiN) coating provides increased hardness, wear resistance and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation.
Sourcing Map
sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) Aluminum Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue
£12.99 (£2.60 / count)- Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 13mm (0.51") / 15mm (0.59") / 19mm (0.75") / 23mm (0.91") / 23mm (0.91") ; total length: 51mm (2.01") / 57mm (2.24") / 62mm (2.44") / 71mm (2.8") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3mm (0.12") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
- Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map Spiral Flute Taps, M4 x 0.7 + 0.1 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap
£8.99- Spiral Flute Taps: Thread Size: M4 x 0.7 + 0.1; Square End Size: 4mm / 0.16". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
- Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Sourcing Map
sourcing map Spiral Flute Threading Tap 4-40 UNC, HSS (High Speed Steel) Titanium Plated Machine Thread Screw Tap 3 Flutes Tapping Tool H2 Tolerance
£6.49- Tap Size: 4-40 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
- Material and Finish: High speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection.
Sourcing Map
sourcing map Spiral Flute Thread Tap M6 x 1, Metric Cobalt HSS (High Speed Steel) Titanium Plated Machine Threading Tap H2 Tolerance Grade
£9.99- Tap Size: M6 x 1 thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
- Material and Finish: Cobalt high speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection and long service life.
Sourcing Map
sourcing map Spiral Flute Taps, M8 x 1.25 + 0.1 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap
£12.99- Spiral Flute Taps: Thread Size: M8 x 1.25 + 0.1; Square End Size: 5mm / 0.2". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
- Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.
Sourcing Map
sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) 6542 Aluminum Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue
£12.99 (£2.60 / count)- Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 11mm (0.43") / 15mm (0.59") / 19mm (0.75") / 23mm (0.91") / 23mm (0.91") ; total length: 51mm (2.01") / 57mm (2.24") / 62mm (2.44") / 71mm (2.8") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3mm (0.12") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
- Material - Spiral Flute Taps is made from High Speed Steel 6542, which offers durability, wear resistance, and versatility for creating accurate and high-quality threads in a variety of materials. The Aluminum Titanium Nitride (AlTiN) coating on a thread tap can effectively improve the high-temperature processing life of taps and provide higher surface hardness.
Sourcing Map
sourcing map 5pcs Metric Spiral Flute Taps Set Set M3 M4 M5 M6 M8 M35 High Speed Steel (HSS) Titanium Nitride Coated Machine Screw Thread Milling Tap Tapping Threading Tools, Blue
£12.99 (£2.60 / count)- Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 12mm (0.47") / 15mm (0.59") / 19mm (0.75") / 22mm (0.87") / 23mm (0.91") ; total length: 52mm (2.05") / 56mm (2.2") / 62mm (2.44") / 70mm (2.76") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3.2mm (0.13") / 4mm (0.16") / 5mm (0.2") / 5mm (0.2")
- Material - Spiral Flute Taps is made from M35 High Speed Steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. The hardness of HSS M35 after heat treatment is higher than HSS 6542 (M2). The titanium nitride (TiN) coating provides increased hardness, wear resistance, and lubricity, which extends the tool's lifespan and helps reduce friction, prevents galling, and enhances chip evacuation during the tapping process.