Specially design for 3D printing hotbed. Bonding does not warp, can be used repeatedly.
Work well on all 3D Printer hot bed, no matter build surface sheet plate, aluminum bed or glass plate, CR 10 CR10S S4 S5 Prus Kossel Wanhao Ultimake XYZ printing Tev Lulzbo Reprpa Monopri Printer and more.
B7000 Glue adhesive Multi Purpose : Self leveling Adhesive with High Elasticity for SmartPhone, Tablet, Electronic Components, Jewelry, Toys, Metal, Glass, Rubber, Fiber, Paper, Ceramics, Wood, Cloth, Textile, Nylon, PVC, Leather and other materials. it also can be glass glue,the function is same as the e6000,and better than e6000 glue
B-7000 Glue can be stretched to its own length of 900% will not break, effectively bonding with the expansion of the material with the surface, improve the durability of the load bearing structure
【Geeetech Glue Sticks】The glue sticks is specially designed by Geeetech for the 3D printer using the FDM process. With this unique glue stick, you fix the adhesion of your 3D-printed objects on the heated print bed during the printing process.
【Use Glue after Heating】After heating the print bed, spread the glue evenly and thinly on the print bed for best results.
Special Formula – Thanks to its rubber-infused and non-drip formula the adhesive provides powerful and precise bonds even on flexible materials and vertical surfaces
Universal Use* – The strong glue is ideal for use on vertical and porous surfaces. It works as wood glue, plastic glue, on rubber, leather, porcelain and paper
Don't let a flat ruin your day, let Slime's 2-in-1 Tyre & Tube Premium Sealant protect your tubes and tires for up to two years
Slime's 2-in-1 Tyre & Tube Premium Sealant seeks out and instantly seals tread area punctures up to a 1/4” in tires and up to 1/8” in tubes. Use with an air source to both prevent and repair punctures
Easy application: applying magigoo is as easy as child's play. shake, press, apply. spread on an active printing area only. no need to cover the whole surface
Easy-release: magigoo adhesive properties are designed to release the 3d print once the build plate has cooled
Quick Dry : This Plastic glue sets in just 10 seconds! Our quick fix superglue dries and bonds instantly saving time and money.Dries and Bonds instantly without the need for clamping
Easy to Use : Our easy to open air tight tubes eliminates risk of unwanted drying out and pin point nozzle of shoe glue allows for a clean and fast application of glue and helps prevent any messy glue spills
Functional design - This strong glue is specially designed for accuracy with an extra long nozzle for precise applications and even for hard to reach places.
All purpose glue - This glue is suitable for various materials such as china or rubber and can also be used as a wood glue, metal glue or plastic glue (except PE, PP).
Universal Use: Used to clean laptops, computers, phones, keyboard car air vent, dashboard, air conditioner etc. Catches over 95% of dirt, can effectively absorb dust and dust in the gap. Please note that: this product should not be stored at high temperature. The cleaning gel is easily hydrolyzed at high temperature for a long time, cause it to becomes close to a liquid state, which will let it can't work.
Safe and Eco-friendly: Made of biodegradable material 100%, not sticky to hands, smell with good fragrance, no skin stimulation. While in use to absorb dust, the cleaning gel doesn’t leave sticky or greasy residue on surfaces or hands. Keep your children away from it.
Easy application: applying magigoo is as easy as child's play. shake, press, apply. spread on an active printing area only. no need to cover the whole surface
Easy-release: magigoo adhesive properties are designed to release the 3d print once the build plate has cooled
Applying on large surfaces is easy. Cover specific area or whole bed, print with or without rafts. Thin layer requires no levelling adjustment. Can compensate errors in levelling or print settings
Save time and effort. Once print is cooled it literally detaches itself. Maggio can act as a good release agent. It's specially useful in cases of excess adhesion on any surface
Magigoo Pro Flex is designed for professional use, to work exclusively with TPU (thermoplastic polyurethane), TPE (thermoplastic elastomer and TPC (thermoplastic copolyester) filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.
Magigoo Pro HT is designed for professional use, to work at high printing temperatures. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.
Magigoo Pro HT has been designed and tested to work with build-plate temperature of 150 °C or lower.
Magigoo Pro PPGF is designed to work exclusively with Glass Filled Polypropylene type filaments. This adhesive for professional use, makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. This unique and innovative mechanism means that no tools are needed to remove prints from the bed. They just pop off when the bed cools down.
MAGIGOO Metal is designed as a professional first layer adhesive with BASF Ultrafuse 316L. Magigoo Metal is non-hazardous, non-flammable and also approved for use in post processing stages of BASF Ultrafuse 316L. Magigoo Metal also enables easy part removal of the green parts from the build-plate.
For use of Magigoo Metal with BASF Ultrafuse 316L a build-plate temperature of 95-105 °C is recommended, nonetheless, the printing conditions might vary between one printer and another.
Easy application: applying magigoo is as easy as child's play. shake, press, apply. spread on an active printing area only. no need to cover the whole surface
Easy-release: magigoo adhesive properties are designed to release the 3d print once the build plate has cooled
Applying on large surfaces is easy. Cover specific area or whole bed, print with or without rafts. Thin layer requires no levelling adjustment. Can compensate errors in levelling or print settings
Save time and effort. Once print is cooled it literally detaches itself. Maggio can act as a good release agent. It's specially useful in cases of excess adhesion on any surface
Magigoo Pro Flex is designed for professional use, to work exclusively with TPU (thermoplastic polyurethane), TPE (thermoplastic elastomer and TPC (thermoplastic copolyester) filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.
Magigoo Pro HT is designed for professional use, to work at high printing temperatures. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.
Magigoo Pro HT has been designed and tested to work with build-plate temperature of 150 °C or lower.
Magigoo Pro PPGF is designed to work exclusively with Glass Filled Polypropylene type filaments. This adhesive for professional use, makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. This unique and innovative mechanism means that no tools are needed to remove prints from the bed. They just pop off when the bed cools down.
MAGIGOO Metal is designed as a professional first layer adhesive with BASF Ultrafuse 316L. Magigoo Metal is non-hazardous, non-flammable and also approved for use in post processing stages of BASF Ultrafuse 316L. Magigoo Metal also enables easy part removal of the green parts from the build-plate.
For use of Magigoo Metal with BASF Ultrafuse 316L a build-plate temperature of 95-105 °C is recommended, nonetheless, the printing conditions might vary between one printer and another.
Easy application: applying magigoo is as easy as child's play. shake, press, apply. spread on an active printing area only. no need to cover the whole surface
Easy-release: magigoo adhesive properties are designed to release the 3d print once the build plate has cooled
Applying on large surfaces is easy. Cover specific area or whole bed, print with or without rafts. Thin layer requires no levelling adjustment. Can compensate errors in levelling or print settings
Save time and effort. Once print is cooled it literally detaches itself. Maggio can act as a good release agent. It's specially useful in cases of excess adhesion on any surface
Magigoo Pro Flex is designed for professional use, to work exclusively with TPU (thermoplastic polyurethane), TPE (thermoplastic elastomer and TPC (thermoplastic copolyester) filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.
Magigoo Pro HT is designed for professional use, to work at high printing temperatures. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.
Magigoo Pro HT has been designed and tested to work with build-plate temperature of 150 °C or lower.
Magigoo Pro PPGF is designed to work exclusively with Glass Filled Polypropylene type filaments. This adhesive for professional use, makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. This unique and innovative mechanism means that no tools are needed to remove prints from the bed. They just pop off when the bed cools down.
MAGIGOO Metal is designed as a professional first layer adhesive with BASF Ultrafuse 316L. Magigoo Metal is non-hazardous, non-flammable and also approved for use in post processing stages of BASF Ultrafuse 316L. Magigoo Metal also enables easy part removal of the green parts from the build-plate.
For use of Magigoo Metal with BASF Ultrafuse 316L a build-plate temperature of 95-105 °C is recommended, nonetheless, the printing conditions might vary between one printer and another.