Technical Parameters: Spec: φ2.4 x 10.3 in (Diameter: 6.2 cm x Length: 26.1 cm); Power: 2.2KW; Voltage: 220V; Current: 7.8A; Collet Size: ER20; Bearings: 4 bearings; Frequency: 300 Hz; Speed: 18000 R/min; Runout off: less than 0.002 mm. Mainly used for engraving machine or used with frequency converter.
ER20 Standard Collet: The collet of the CNC router spindle is quenched with manganese steel, and the runout is less than 0.002 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.
1200 mm SBR16 Linear Rail Kits: This linear rail set includes 2 pieces of 1200 mm/47.2" long SBR16 rail shafts and 4 SBR16UU blocks. Sliding blocks to be used cooperatively with rails, smooth sliding provided by inside linear bearing.
High-quality Steel Material: CNC parts linear rails are made of carbon steel, linear Bearings made of GCr15 bearing steel with aluminum alloy housing. Surface chrome plating treatment beautiful rust-proof, hardness can as high as HRC62, more durable.
Complete Linear Rail Kits: This linear rail set includes 2pcs 86.5 in / 2200 mm long SBR20 rail shafts and 4pcs SBR12UU blocks. Sliding blocks are used cooperatively with rails, smooth sliding provided by the inside linear bearing.
High-Quality Steel Material: CNC parts linear rails are made of carbon steel, linear bearings are made of quality bearing steel with aluminum alloy housing. Surface chrome plating treatment beautiful anti-rust, high hardness, more durable.
This linear rail set includes 2 pieces of 1500mm/59" long SBR16 rail shafts and 4 SBR16UU blocks. Sliding blocksto be used cooperatively with rails, smooth sliding provided by inside linear bearing.
CNC parts linear rails are made of carbon steel, linear Bearings made of GCr15 bearing steel with aluminum alloy housing. Surface chrome plating treatment beautiful anti-rust, hardness can as high as HRC62, more durable.
Premium Quality Structure: 45# steel jaws, after high-frequency quenching, undergo improving the jaws' wear resistance and service life. Vise body for the HT250 high quality cast iron forging, which has good toughness, high strength, and durability.
Powerful Clamping Force: Vise guide surfaces are finely polished, smooth surface. When clamping the workpiece, the movement is stable, the positioning is accurate, and the clamping force can reach up to 19 KN, which is suitable for workpieces of different sizes.
Structure Upgrade: Masuter Pro is an All-Aluminum CNC router, which makes the machine sturdier than the last version. The Z-axis uses linear rails instead of the optical axis, this greatly improves the stability and accuracy.
Upgraded Controller Box: The control board is upgraded to a compact controller box. The emergency stop button and home button are more easily and more convenient to access. The control box is also dust-proof for easy maintenance.
New Version: Genmitsu CNC 3018-PRO is an upgraded version of 3018. With an integrated mainboard and custom software, communication between the software and hardware is seamless by design. 3018-PRO offers a large work surface of 300 x 180 mm x 45 mm. Spindle: 775 motor, 24V, 10000 RPM.
Built to suit your needs: If you are an experienced CNC engraving enthusiast looking for an upgrade, you can add the laser module kit to the machine. Or if you need extra working room you can add the Y-Extension and expand your work area. If you need to work with harder materials, upgrade your Z-Axis with the new all-metal carrier for larger 300W spindles.
***【 Guarantees & Honest After Sale-Service 】*** The CNC 3018 Pro machine with 5500 power module is the latest machine from Mostics Tech; Guarantee for this entire CNC Router is 12 months. Additionally, we provide technical support and fittings for life. Any problems, please be free to contact us. We have professional technicians here to help you solve any problems. (For instance, we can teach you how to better polish the finished works or help you to transfer G-Code)
【Updated Version】Newly designed 3 handwheels + Integrated Driver Chip + Fixed heat sink + External fan + Sturdy housing to extend the life of the control panel, Self-sufficient short-circuit protection.
[Outstanding Precision and Accuracy] The WM-3020 CNC machine is equipped with HG-15 linear bearings and 12mm balls crews on all 3 axes. These industrial components enable the carving to be faster, quieter, and more stable and precisely.
[Multiple Spindle Options] WM-3020 comes with a 300watt spindle, which is capable to engrave and cut wood, acrylic, carbon fiber, aluminum and brass. The z-axis is compatible with 65mm and 69mm spindle clamp, which means it is compatible with the trimmer routers such as DWP611, RT0701C, engraving module, and 1.5kw spindle.
Ideal CNC Router For Metal: Bigger and better with an all new extra rigid and beefy design featuring an increased Z Height of 72mm dual steel X axis guide rails, all aluminum spindle holder and 300W spindle. All these upgrades make metal carving easier, ideal for an endless variety of drilling, and carving operations on various metals, like brass, copper and 6061 aluminum, etc.
Much More Steady Z Axis: Upgraded linear guide structure and 4040 Y axis profiles highly improve the engraving accuracy and processing strength, eliminating Z axis wobble issues that most other desktop CNC machines have.
【Package Contents】: A set of Z-axis tool probes for CNC milling machines (with TWO adapter cables) with high accuracy, smooth surface and beautiful design;
【Size&Parameters】: Ultra-thin sensitive inductive holders only 10 mm thick with a cable length of approximately 80cm;
[Sturdy mounting bracket]: This stepper motor mount bracket are made of premium steel which adopt 3mm steel plate forming manufacturing process, both sides of the re-welding reinforcement to ensure sufficient strength.
[Universal size]: All the slotted opening are formed for a high precision punching processing to ensure the size and motor absolute matching; And the detail dimensions of all slots are as shown in the picture.
New Version: Genmitsu CNC 3018-PRO is an upgraded version of 3018. With an integrated mainboard and custom software, communication between the software and hardware is seamless by design. 3018-PRO offers a large work surface of 300 x 180 mm x 45 mm. Spindle: 775 motor, 24V, 10000 RPM.
Built to suit your needs: If you are an experienced CNC engraving enthusiast looking for an upgrade, you can add the laser module kit to the machine. Or if you need extra working room you can add the Y-Extension and expand your work area. If you need to work with harder materials, upgrade your Z-Axis with the new all-metal carrier for larger 300W spindles.
✅【Enjoy Making DIY product】With Detailed Manual, enjoy making DIY work at home or anywhere, have fun with your friends and family.
✅【Upgraded Control Board】 The New Control Board was upgraded to extend the lifespan effectively! Protective Case + Integrated Driver Chip + Fixed Heat Sink + External Fan + Power Button. With short circuit protection system, more safe. Because we value your safety a lot:)
***【 Guarantees & Honest After Sale-Service 】*** The CNC 3018 Pro machine with 5500 power module is the latest machine from Mostics Tech; Guarantee for this entire CNC Router is 12 months. Additionally, we provide technical support and fittings for life. Any problems, please be free to contact us. We have professional technicians here to help you solve any problems. (For instance, we can teach you how to better polish the finished works or help you to transfer G-Code)
【Updated Version】Newly designed 3 handwheels + Integrated Driver Chip + Fixed heat sink + External fan + Sturdy housing to extend the life of the control panel, Self-sufficient short-circuit protection.
***【 Guarantees & Honest After Sale-Service 】*** The CNC 3018 Pro machine with 5500 power module is the latest machine from Mostics Tech; Guarantee for this entire CNC Router is 12 months. Additionally, we provide technical support and fittings for life. Any problems, please be free to contact us. We have professional technicians here to help you solve any problems. (For instance, we can teach you how to better polish the finished works or help you to transfer G-Code)
【Updated Version】Newly designed 3 handwheels + Integrated Driver Chip + Fixed heat sink + External fan + Sturdy housing to extend the life of the control panel, Self-sufficient short-circuit protection.
【New Version】CNC 3018-PRO is an upgraded version of 3018. Control software: GRBL; Working area: 30x18x4.5cm; Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10.
【The main two advantages of offline controller】1.Do not need to connect the computer; 2.Do not need to download files. Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle, manully open or close cooling fan.
【Efficient pre-assembly】CNC 3018 Pro Max pre-installed base, gantry and small parts (limit switch, emergency stop, sealing strips, etc.) shorten the installation time to about 30 minutes, save a lot of complicated installation steps, and reduce the likelihood of installation errors that will save your precious time and energy, especially for CNC machine beginners.
【Multiple protection】 Mostics CNC 3018 Pro max added precise positioning of the hand wheel, does not have to debug repeatedly in Candle. The limit switch is sensitive to lock the machine in time. The emergency stop switch can interrupt the abnormal state of the CNC milling in time. The 5 mm thick acrylic deflectors on both sides of the fuselage effectively prevent dust and debris from swirling during engraving, thus protecting the operator's safety
✅ 20 Minutes Simply Assembly: to save your valuable time, some components have been preassembled, eliminating mounting issues with great accuracy. Working area: 300x180x45mm; Software: GRBL Control; Spindle: 775 spindle motor (12-36V) 24V:10000r / min; Support System: Windows XP / Win 7 / Win 8 / Win 10.
✅ Come with 3 W 3000m W module: can be carved wood, bamboo, paper, ivory, leather, flammable plastic, PCB, acrylic, metal surface paint, metal surface plating etc. Can not work on metal, iron, glass, 201/304 stainless steel, jewelry or silver.
The 3018-PROVer CNC Roouter is just a start. If you're looking for an even larger machine, get the Y-axis expansion kit. Expand your machine with an optional sturdy aluminum spindle holder or powerful laser modules. You can find more accessories at our Amazon store.
The SainSmart 3018-PROVer is the latest version of the 3018 Desktop CNC DIY Kit Series. Now Pre-assembled and no fuss with assembly taking less than 15 minutes out of the box.
Super Size your CNC: This kit will extend your CNC‘s Y-Axis to 370mm(14.6”) and allows it to travel 320mm, easily convert your 3018 to a 3040.
It is a direct upgrade to Most 3018 Series CNC in the market with ∅8mm lead screw and ∅10mm polished rod. Please do not hesitate to contact us if you are not sure whether this product is compatible with your machine.
Application: The laser module is ideal for engraving, cutting, scribing, and drilling. Desired patterns can be made easily on the wood or plastic by this unit. This module is only compatible with Gemmitsu ProverXL 4030 and 3018-PRO
Fixed Focus: The fixed focus distance is 20mm. Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. At the same power, the fixed focus laser module can cut 3mm linden wood in one pass, not possible with current adjustable laser modules.
New Version: Genmitsu CNC 3018-PRO is an upgraded version of 3018. With an integrated mainboard and custom software, communication between the software and hardware is seamless by design. 3018-PRO offers a large work surface of 300 x 180 mm x 45 mm. Spindle: 775 motor, 24V, 10000 RPM.
Built to suit your needs: If you are an experienced CNC engraving enthusiast looking for an upgrade, you can add the laser module kit to the machine. Or if you need extra working room you can add the Y-Extension and expand your work area. If you need to work with harder materials, upgrade your Z-Axis with the new all-metal carrier for larger 300W spindles.
✅【Enjoy Making DIY product】With Detailed Manual, enjoy making DIY work at home or anywhere, have fun with your friends and family.
✅【Upgraded Control Board】 The New Control Board was upgraded to extend the lifespan effectively! Protective Case + Integrated Driver Chip + Fixed Heat Sink + External Fan + Power Button. With short circuit protection system, more safe. Because we value your safety a lot:)
***【 Guarantees & Honest After Sale-Service 】*** The CNC 3018 Pro machine with 5500 power module is the latest machine from Mostics Tech; Guarantee for this entire CNC Router is 12 months. Additionally, we provide technical support and fittings for life. Any problems, please be free to contact us. We have professional technicians here to help you solve any problems. (For instance, we can teach you how to better polish the finished works or help you to transfer G-Code)
【Updated Version】Newly designed 3 handwheels + Integrated Driver Chip + Fixed heat sink + External fan + Sturdy housing to extend the life of the control panel, Self-sufficient short-circuit protection.
***【 Guarantees & Honest After Sale-Service 】*** The CNC 3018 Pro machine with 5500 power module is the latest machine from Mostics Tech; Guarantee for this entire CNC Router is 12 months. Additionally, we provide technical support and fittings for life. Any problems, please be free to contact us. We have professional technicians here to help you solve any problems. (For instance, we can teach you how to better polish the finished works or help you to transfer G-Code)
【Updated Version】Newly designed 3 handwheels + Integrated Driver Chip + Fixed heat sink + External fan + Sturdy housing to extend the life of the control panel, Self-sufficient short-circuit protection.
【New Version】CNC 3018-PRO is an upgraded version of 3018. Control software: GRBL; Working area: 30x18x4.5cm; Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10.
【The main two advantages of offline controller】1.Do not need to connect the computer; 2.Do not need to download files. Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle, manully open or close cooling fan.
【Efficient pre-assembly】CNC 3018 Pro Max pre-installed base, gantry and small parts (limit switch, emergency stop, sealing strips, etc.) shorten the installation time to about 30 minutes, save a lot of complicated installation steps, and reduce the likelihood of installation errors that will save your precious time and energy, especially for CNC machine beginners.
【Multiple protection】 Mostics CNC 3018 Pro max added precise positioning of the hand wheel, does not have to debug repeatedly in Candle. The limit switch is sensitive to lock the machine in time. The emergency stop switch can interrupt the abnormal state of the CNC milling in time. The 5 mm thick acrylic deflectors on both sides of the fuselage effectively prevent dust and debris from swirling during engraving, thus protecting the operator's safety
✅ 20 Minutes Simply Assembly: to save your valuable time, some components have been preassembled, eliminating mounting issues with great accuracy. Working area: 300x180x45mm; Software: GRBL Control; Spindle: 775 spindle motor (12-36V) 24V:10000r / min; Support System: Windows XP / Win 7 / Win 8 / Win 10.
✅ Come with 3 W 3000m W module: can be carved wood, bamboo, paper, ivory, leather, flammable plastic, PCB, acrylic, metal surface paint, metal surface plating etc. Can not work on metal, iron, glass, 201/304 stainless steel, jewelry or silver.
The 3018-PROVer CNC Roouter is just a start. If you're looking for an even larger machine, get the Y-axis expansion kit. Expand your machine with an optional sturdy aluminum spindle holder or powerful laser modules. You can find more accessories at our Amazon store.
The SainSmart 3018-PROVer is the latest version of the 3018 Desktop CNC DIY Kit Series. Now Pre-assembled and no fuss with assembly taking less than 15 minutes out of the box.
Super Size your CNC: This kit will extend your CNC‘s Y-Axis to 370mm(14.6”) and allows it to travel 320mm, easily convert your 3018 to a 3040.
It is a direct upgrade to Most 3018 Series CNC in the market with ∅8mm lead screw and ∅10mm polished rod. Please do not hesitate to contact us if you are not sure whether this product is compatible with your machine.
Application: The laser module is ideal for engraving, cutting, scribing, and drilling. Desired patterns can be made easily on the wood or plastic by this unit. This module is only compatible with Gemmitsu ProverXL 4030 and 3018-PRO
Fixed Focus: The fixed focus distance is 20mm. Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. At the same power, the fixed focus laser module can cut 3mm linden wood in one pass, not possible with current adjustable laser modules.