Stanley tylon 8m 26ft
10-1 of 40 results

Turbo Blaster Bike Dryer Cycle Dryer Warm Air Drying Dusting Car Motocross Detailing Blower Flexible Hose Powerful Rapid Air Dry Care 2 Wind Speed 2800W

• ★ High air flow and quick heating for efficient drying: 540g blow force is 3 times stronger than similar dryers.5-72m/s min airflow is 30% greater than other single-stage dryers and helps eliminate water spotting and corrosion associated efficiently. Also Perfect to blow off snow on car / motocyble / bike..
• ★2800W dryer for powerful drying: 2800W is the perfect power with Natural Drying, which can blow water spotting, dirt, corrosion associated both quickly and efficiently off the car or Motorcycles.

shernbao Special Hose for Dog Dryer Hair Dryer (Compatible Model: SMD-06)

• Compatible Shernbao Dryer Model： SMD-06P SMD-06Pro; SMD06-06 SMD06-06Pro;
• SMD-06 dryer is equipped with two kinds of hose connectors. If you buy the wrong connector, you will fail to connect. Please refer to the specific connector specifications to purchase accessories!

BLO AIR-GT - Powerful Variable Speed Car Dryer with Warm Filtered Air and Extra Long Hose (26ft/8M) Power: 64,000 CFM/FPM - 8HP - 3 Year Warranty*

Apex Customs BigBoi BlowR Pro Touchless Car Dryer

• Touchless drying keeps paintwork safe from scratches & swirls
• Powerful twin motors blast water out of traps & away from surfaces

Carbon Collective Air Force One Car Dryer

• Our Air Force 1 Car & Motorcycle Dryer delivers powerful, effective and contactless drying; whether you are at home, or on the go.

Multi-Functional Dryer! 2800W Powerful Motorcycle Motorbike Portable Car Bike Dryer Blower,Cat/Dog Grooming Pet Dryer-Below 72dB Low Noise w/2.5M Hose,3 Nozzles

• 1. Specifically designed to easily and quickly dry intricate areas of your vehicle which are inaccessible. Perfect for engine parts, grills and air intakes where water gets stuck.
• 2. 2800W stepless speed,2 Gear temperature available: 30℃-70℃(95-158℉). Continuously variable airflow, wind speed from 25M/S to 65M/S. With the high velocity drying power and heating function, you can save a lot of time and effort.

BigBoi BlowR PRO+ Touchless Heated Air Car Dryer

• Detailing first remote control function in your hand
• Touchless drying keeps paintwork safe from scratches & swirls

Car Dryer Portable Motorbike Air Blower - 130000RPM 52 m/s Brushless Motor - Mini Turbo Fan Detailing Blaster - Turbo Motorcycle Blower - Pocket Super Power Pet Dryer - Automotive Bike Cleaning

• < Contact Free Drying > The portable mini turbo fan car dryer can offer non-contact car drying eliminating swirl marks and scrathes that can occur when using the touch towel method
• < Wireless And Portable > The super power turbo fan can be taken anywhere without the need for a power source therefor much more convenient than the cord and hose type dryers.

Dryer For Car & Motorcycle Dryer and Duster, Metro Motorbike Dryer, Low Noise Blaster 2800W Speedless Dryer, High Power Grooming Dryer,Professional Pet Dog Cat Heater, 3 Nozzles

• ★Specifically designed to easily and quickly dry intricate areas of your vehicle which are inaccessible. Perfect for engine parts, grills and air intakes where water gets stuck.
• ★2800W speed,continuously variable airflow, wind speed from 25M/S to 50M/S. With the high velocity drying power and heating function, you can save a lot of time and effort.

Electric Heat Gun Kit - 2000 Watt Motor and Dual 350 ℃ -550 ℃ Temperature 2 Speed, 4pc Nozzle Accessories Set Included Paint Gun for Stripping Paint, Soldering Pipes, Shrinking PVC

• Powerful 2000W Heat Gun - ideal for DIY restoration, paint stripping, loosening adhesive, bending copper pipes, loosening rusted bolts, lighting barbeques and more
• Two operating temperatures: 350°C - Min with 250L/min airflow and 550°C - Max with 550L/min airflow - incorporates a thermostat to prevent overheating to prolong tool life

WK ieason Replacement Plastic Straws Reusable Drinking Starws Compatible with Hydro Flask Water Bottle 18-64oz and Other Brands with 2 Straw Brushes, Non Toxic Clear Straws

• 🌟Excellent and Wide Compatibility - The straw size (9.6" length x 0.31" wide) is compatible with Hydro flask 18-64OZ. And it is also perfect for other brand bottles/flasks since the straw length is free to cut to fit your bottle size
• 🌟 Non Toxic Plastic Material - Each straw was made of food-grade Plastic material, BPA-free, odorless, reusable, durable, foldable and cuttable

Beer Bottle Sleeve Insulators 12oz 330ml Standard Beer Bottle Cooler Covers Zip-up Bottle Jacket 12OZ Standard Can Sleeves Coolie Neoprene Insulator Coolers koozies coozies for cans (Blue)

• ❄️INSULATED NEOPRENE - SUPERIOR QUALITY - These aren’t your average beer sleeves for beer bottles! They are engineered non-slip fabric texture neoprene, totally new and stylish to keep your hands dry and lock your beverage coldness longer
• ❄️PERFECT FIT – the fabric is a bit stretchable, easy to fit your regular sized 12 oz can & beverage ( beer, wine and soft drink bottles (long neck). Will not fit over-sized or short bottles.

WK ieason Replacement Plastic Straws Reusable Drinking Starws Compatible with Hydro Flask Water Bottle 18-64oz and Other Brands with 2 Colorful Straw Brushes, Non Toxic Clear Straws

• 🌟Excellent and Wide Compatibility - The straw size (9.6" length x 0.31" wide) is compatible with Hydro flask 18-64OZ. And it is also perfect for other brand bottles/flasks since the straw length is free to cut to fit your bottle size
• 🌟Non Toxic Plastic Material - Each straw was made of food-grade Plastic material, BPA-free, odorless, reusable, durable, foldable and cuttable

WK IEASON Flask Silicone Boot Base Cover Sleeve, BPA free Silicone Boot Bottom Protector 12-40OZ for Hydro Yeti Flask and More (32-40OZ, Solid black)

• 😊SMART DESIGN - create a bright new looking for your favourite flask. Warning: silicone boot only, flask water bottle is excluded.
• 🌟Snug fitting--Our Silicone boot fits Most Vacuum Sealed Water Bottles 32 40 oz wide mouth water bottles (Boot Size: 3.56inch bottom diameter, 1.89 inch high). Note: it is not compatible with 30-40oz Stanley flask with thinner bottom, pls do check the flask bottom diameter before ordering.

WK IEASON 2pc Multifunctional Silk Cooling Headband Neck Gaiter Scarf, Breathable Bandana Summer Face Scarf Mask Balaclava Ice Cooling Headwear for Dust, UV Resistance Sport Outerdoors

• ♫【ONE SIZE FITS ALL】: The natural length and width is 19.7 x 9.8 inch, the maximum stretchable circumference is 22.5-24.5 inches. Four-sided stretch to fit most people
• ♫【Skin Friendly Material】： It was made of 87% nylon and 13% spandex, super cool and ice silk feeling, perfect for UV&dust resistance in hot summer. Quick-drying and breathable.

WK IEASON Lip Balm Holder Keychain Single 3pcs Clip on Chapstick Sleeves Holder Pouch Tight-Knit Elastic Lipstick Sleeve (Blackx3)

• 💋 PREMIUM material: Our sleeves were made of durable, tight-knit fine elastic so you can feel safe, secure and nice hand feeling. Nothing will slide out!, flexible to hold most standard size (fat and slim) lipsticks and lip balms snugly.
• 💋 Quality finishing: Each sleeve is hand-made carefully, you can feel the side seam is flat, straight and neat, not average workmanship

WK IEASON 2 Pcs Tumbler Bottom Protector Flask Silicone Boot for Stanley Quencher Adventure 40oz & Stanley IceFlow 20oz 30oz and Compatible with Hydro Flask Wide Mouth 12oz 21oz 24oz (Diamond/fog)

• 😊SMART DESIGN - 2pcs in one package, our designs create a bright new looking for your expensive Stanley flask. Warning: silicone boot only, flask water bottle is excluded.
• 😊Snug fitting--Our Silicone boot was designed for Stanley Adventure Quencher 40oz and Stanley IceFlow 20oz 30oz Tumblers (Boot Size: 2.83inch bottom diameter, 1.89 inch high). Note: this flask sleeve is also ok for Yeti flask, Hydro flask wide mouth 12-24OZ and more brands flask which diameter is 2.83inch.

Lip Balm Holder Keychain Single 3pcs Clip on Chapstick Sleeves Holder Pouch Tight-Knit Elastic Lipstick Sleeve (Beige/light blue/light indipink)

• 💋 PREMIUM material: Our sleeves were made of durable, tight-knit fine elastic so you can feel safe, secure and nice hand feeling. Nothing will slide out!, flexible to hold most standard size (fat and slim) lipsticks and lip balms snugly.
• 💋 Quality finishing: Each sleeve is hand-made carefully, you can feel the side seam is flat, straight and neat, not average workmanship

WK IEASON 16oz Standard Can Sleeves Insulators Neoprene Standard Can Covers Coolers Holder Non-Slip Neoprene Can Coolie (16OZ, Black/Red/Yellow/Blue)

• ❄️INSULATED NEOPRENE - SUPERIOR QUALITY - These aren’t your average beer sleeves for slim cans! They are engineered non-slip fabric texture neoprene, totally new and stylish to keep your hands dry and lock your beverage coldness longer
• ❄️PERFECT FIT – the fabric is a bit stretchable, easy to fit your 16oz cans snugly like a glove and very important to know our sleeves will never get loose after long time using like a normal neoprene sleeve

WK IEASON 12oz Standard Can Sleeves Insulators Holder Non-Slip Neoprene Can Cooler for Coco cola, White Claw and More(Black/Cool Mint/Dark Blue/Khaki)

• ❄️INSULATED NEOPRENE - SUPERIOR QUALITY - These aren’t your average beer sleeves for standard cans! They are engineered non-slip fabric texture neoprene, totally new and stylish to keep your hands dry and lock your beverage coldness longer
• ❄️PERFECT FIT – the fabric is a bit stretchable, easy to fit your 12oz standard cans snugly like a glove and very important to know our sleeves will never get loose after long time using like a normal neoprene sleeve

50mm Blower 24v 5015 Hydraulic Bearing 50mm x 15mm DC Brushless Cooler Turbo Fan for 3d Printer Extruders, Humidifiers and other small heat dissipation devices (2 pcs)

• 1.Package contents: 2 x 5015 fans 24v.
• 2.Cooling fan a radial fan with hydraulic bearing and brushless DC design.speed:7000 RPM, high performance, more stable and long service life.

3D Printer Nozzle Cleaning Kit,Stainless Steel Nozzle Cleaning Tool Set,10 Pack 0.4 mm MK8 Nozzles,10 Pack 0.4 mm Needles Cleaner Pin and 1 Pack Tweezers Tool kit for 3D Printer Maintenance Tools

• 1.[ Material ]: The 3D printer nozzles are made of fine quality brass material, sturdy and durable. Needles are made of flexible stainless steel, and it is a good gentle maintenance tool.
• 2.[Tweezers Tool]: 3D printing tweezers are good for nozzle maintenance and cleaning excess support material. It is anti-static, non-magnet curved precision tweezers.

6Pcs Leather Zipper Pull Leaf-Shaped Tag with Gold Ring for Repairing Replacement Zipper Head, Boots, Clothes, Bags，Jacket (Black)

• 1.FEATURES: Zipper tabs are made of genuine leather, washable and not easily deformed.
• 2.ADVANTAGES: Leaf shape design, stitching, rounded edges;with gold ring, not easy to lose color.

Ruimou utomotive Plastic Bumper Repair Machine Welding Hot Staples (500pcs*0.8mm Wave Hot Staples)

• 1.Material : welding staples is made of stainless steel.
• 2.Function:1pack (500pcs) of 0.8mm wave staples for kinds of plastic repair / welding, designed for bridging cracked areas together where added strength.

Ruimou 50pcs PP Plastic Welding Rods Length 7.9 Inch PP Welding Sticks for Car/Kayak Plastic Repair (White)

• 1.Materials:welder rods are made of PP plastic, Non-toxic and tasteless. Resistant to acid, alkali and corrosion.
• 2.Function: The electrode has good resistance and high-frequency insulation moisture, wear resistance, and durability,easy to use.

6 Pairs Memory Foam Tips(S/M/L) for 3mm-4mm Connection Hole in-Ear Headphones Compatible with TIN HiFi T2/T2 Pro,SHURE SE846/535/215,Winston W Series,Meizu Live

• 1.The earbud head is made of memory foam with slow rebound characteristics.
• 2.Comfortable and breathable, good noise reduction and sound insulation, long wearing painless, non-toxic.

2pcs Brass Hose Barb OD (1/4" to 5/16") for Air Water Fuel Hose Adapter Joiner Reducer Connector (2pcs 6mm-8mm)

• 1.The conversion joint is made of brass; Corrosion resistance, long service life.
• 2.Backhook design, increase sealing, solid connection; Two hoses of different diameters are connected in a straight line.

2Pcs 4PJ307 Rubber Drive Belt Replacement Belt Compatible with Stanley Bostitch & Husky Air Compressors (AB-9075047)

• 1.Material:The drive belt is made of rubber and is resistant to wear and tear.
• 2.Advantages: Good dynamic resistance, less cracking, water resistance, non-flammability, oxidation resistance; silk fabric and nylon added inside for increased wear resistance.

Carbon Brushes for Angle Grinder(14x11.8x6.4mm) N421362 Auto Stop Function Compatible with DeWalt DWE4202 DWE4204 DWE4206 DWE4217 DWE4238 (4Pcs Carbon Brushes)

• 1.Carbon brushes are made of metal and carbon.
• 2.with auto stop function, once the carbon brushes are worn out indicating the need to replace the carbon brushes, the machine will stop working; Part No. (OEM): N421362; is a good replacement part.

12Pcs Natural Ostrich Feather 9.8-11.8inch(25-30cm) for DIY Gatsby Decorations, Wedding, Holiday Party, Masquerade(12 Color）

• 1.Material:100% natural ostrich feathers.soft and comfortable.
• 2.Size:Feather Length 9.8-11.8 inch/25-30cm.

Stanley 3m Measure Tape (STHT36125-812)

• This 5M Tape Is Yellow In Colour And Ensures The Matchless Performance. It Is Long Lasting, Durable And Easy To Use. It Comes In Yellow Color With An Elegant Design.
• Ensures The Matchless Performance

Stanley STHT36127-812 Plastic 5m Tape (Yellow)

• This 5m tape is yellow in colour and ensures the matchless performance. It is long lasting, durable and easy to use. It comes in yellow color with an elegant design.
• Stanley-short tape rule: Flexible tape with ergonomic groove

Tools Centre 1-13mm (JT6 Jacobs Taper) MT2 Arbor Heavy Duty Taper Drill Chuck With Key & Arbor MT2 Shank | Lathe machine Chuck | Bench Drill Chuck

• Chuck Capacity 1-13mm Mount: JT6 Arbor: MT2 Shank (JT6)
• Quality All Steel Construction, Ground Finishing, Hardened Jaws.

Twisted Cup Brush for Removing Rust, Paint, As Well as Polishing (3 Inch)

Taparia 1443-5S External Straight Nose Circlip Plier

• Made from suitable high grade steel
• Pliers are fitted with retunrn spring to smooth operation

Taparia SA46 Steel Socket Set (Blue, 46-Pieces)

Bosch GWS 600 Professional Angle Grinder (Blue)

• Powerful machine with 670W brush motor; slim; lightweight design provides fatigue-free working; reducing risk of mistakes and injury; supplied with guard and side handle
• 2 position side handle all-metal gearbox fan-cooled motor spindle lock; lock on switch; replaceable carbon brushes; supplied with guard