Sturdy and Durable: Our V-groove wheel made of color-coated galvanized steel, Wear-resistant and high-temperature resistant, anti-rust and anti-corrosion.
Perfect Design: Pulley Wheels adopt two ball bearing design, with high-strength bolts and anti-loose nuts, effectively reduce vibration, run smoothly, and minimize noise.
HIGH-QUALITY MATERIAL -- This pulley is made of thickened steel, with fine workmanship, smooth wheel grooves without burrs, uniform hardness of bearing steel balls, good stability and firmness, and rust and corrosion resistance, not easy to deform and damage, can be prolonged use;
STRONG BEARING CAPACITY -- The diameter of our pulley is 31 mm, the width of the wheel surface is 25 mm, the length of each wheel is 55 mm, the width is 30 mm, and the height is 40 mm. Thickened steel can greatly increase the bearing capacity of the bracket, and the use is more stable and safety;
Durable Material:Single pulley is made of 304 stainless steel, great sturdy, anti-rust, wear-resistance and corrosion-resistant, rugged construction design make it extremely rugged.
360 Degree Rotation: This M25 single pulley block is ergonomically designed with smooth turning wheel, 360 degree rotation to prevent rope/cable/wire from knotting for your convenient use.
Material - The cup grinding wheel is made of green silicon carbide, which has the characteristics of wear-resisting, high hardness, strong cutting ability, uniform particle size, high temperature resistance and strength.
White Aluminum Oxide Material - Made of quality white aluminum oxide, the flared cup has sharp edges and corners, good grinding effect, and less heat generation. It has high hardness, strong cutting force, wear resistance and long service life.
[Installation size]: The pile rectifier bridge filter circuit design, can be a transformer or a DC power supply, power supply voltage 12-15V / 300mA. Installation dimensions: outer frame is 67.4MM * 56MM, screw hole installation size: 57MM * 50.5MM, Screws suitable for M3 screws
[Adjustable]: Adjustable level swings, can be compatible with all different types of table headboard, two 500 ohm blue potentiometers on the board can adjust the sensitivity of the two headboards separately, turn clockwise to increase the sensitivity
Price For: Pack of 1Order Unit: Each No. of Channels: 2Channels No. of Amplifiers: 1 Amplifier Bandwidth: 18MHz Operating Temperature Min: -40°C Operating Temperature Max: 125°C Supply Voltage Range: 2.5V to 5.5V Amplifier Case Style: MSOP No. of Pins: 10Pins Packaging: Each MSL: MSL 1 - Unlimited SVHC: No SVHC (17-Dec-2015)
The gain control range of this amplifier is default 80db (-25~55db), providing some common gain and bandwidth configuration parameters.
Module uses ±5V as power supply, magnetic beads and tantalum capacitor filter greatly reduce interference and power supply ripple.This module has GND test points for users to test conveniently.
【Wide Frequency Range】With a frequency range of 1MHz-6GHz, this 20dB gain block boosters module provides exceptional width to meet diverse RF application needs.
【High Linearity and Low Noise】Designed for superior performance, this boosters ensures high linearity with ultra low noise, delivering a clear and reliable signal.
Resolution: 128 x 64; Viewing angle: greater than 160 degrees; Support voltage: 3.3V-5V DC; Power consumption: normal working 0.04W, full screen light up 0.08W
Application: 0.96 inch OLED module, used to display graphics and text information directly on your microcontroller project; Support a variety of chips: compatible with Arduino Mega, pi, 51 MCU, STIM 32, etc.
0.91 inch OLED module is designed to display graphic information and text information directly on your microcontroller project;
Resolution is 128 x 32, Supporting voltage is from 3.3V-5V DC.The display performance is better than the traditional LCD display, also lower consumption; I2C oled display, IIC (I2C communications) simplifies connections.
The high-contrast OLED module with a large 1.3-inch display and innovative OLED technology provides a clear display of elements with a high resolution of 128-by-64 pixels.
Supports multiple platforms: Arduino, 51 series MSP430 series, STM32/2 series CSR chip, etc. Convenient for your operation. Bright, anti-reflective TFT display with a large 0.96 inch image diagonal. Large resolution of 128x64 pixels for clear presentation of texts, graphics and images