Premium Material: Made of ABS plate and strong adhesive, durable and for long time use. Diameter: 8cm /3.15 Inch. Upper part ABS plate provides smooth and flat surface. The bottom strong sticky PE foam adhesive fixed dashboard textured surface.
Wide Compatibility: Could be applied to the smartphone mount, car camera, GPS suction mount and more. It performs perfect at any seasons. Heat-resistant and moisture-resistant. It could adhere to vertical surfaces, soft-touch dashboards and windshields.
This iBOLT 25mm to 17mm Dual Ball Mount arm is made out of a sturdy composite material and is compatible with all industry standard 1 inch / 25 mm mounting arms.
Commonly used as an converter with IBBZ-33921 or IBBZ-33791 and other industry standard 25mm / 1 inch dual ball mounts / arms to any industry standard 17mm bracket including Garmin GPSand iBOLT smartphone holders. Use with Bizmount series mounts or any other 1-inch / 25mm / B size industry standard compatible mount.
【Wide Compatibility】Compatible with any Garmin handheld GPS that uses the spine mount system! Works with Garmin out front bike mounts and TUSITA mounts (Need to purchase separately)
【Easy to Use】Slide, snap, and secure! Keep your compatible device within reach while on the move with this spine clip. Simply snap your device securely into the durable plastic mount and clamp it to your bike
Premium Material: Made of ABS plate and strong adhesive, durable and for long time use. Diameter: 7.3cm /2.87 Inch. Upper part ABS plate provides smooth and flat surface. The bottom strong sticky PE foam adhesive fixed dashboard textured surface.
Wide Compatibility: Could be applied to the smartphone mount, car camera, GPS suction mount and more. It performs perfect at any seasons. Heat-resistant and moisture-resistant. It could adhere to vertical surfaces, soft-touch dashboards and windshields.
TOMTOM COMPATIBLE – Sat Nav holder is compatible with a wide range of TomTom GPS models including One, One XL, XL, XXL and IQ Route devices, as well a huge range of other models and types
EASY TO INSTALL – Simply attach the suction cup to the windshield of your car, then mount your Sat Nav. Ready to go in seconds
【Wide Compatibility】This bike mount compatible with Garmin Fenix 7X, Fenix 6X Pro, Quatix 6X Solar, Enduro, Tactix Delta Smartwatch. Come with 3 large elastic bands, and 3 small elastic bands, so you can secure your compatible device to diffrent size bicycle's stem or handlebars, enables you to easily view performance data on your GPS watch.
【Best Partner for Bike】 Secures your smartwatch in front of your bike handlebars to optimise viewing, heads-up positioning provides increased safety. This also makes navigation much easier for you. Without twisting your arm. Let's free our hands, enjoy the fun of riding!
HEAVY DUTY- Double Socket arm is made out of a strong aluminum material and works with all industry standard 1 inch / 25mm / B Size ball adapters.
COMPATIBILITY: Commonly used with IBBZ-33921 or IBBZ-33791 and other industry standard 25mm / 1 inch dual ball mounts / arms. Use with Bizmount series mounts or any other 1-inch / 25mm / B size industry standard compatible mount.
【Great Compatibility】Compatible with multiple Oregon, Alpha, inReach, GPSMAP, and eTrex devices.
【Quick Release】:The quick-release mount also is used to easily stow your compatible device for optimal GPS performance while still providing access at a moment’s notice. When the device is detached from the quick-release mount, the spine mount and lanyard cord - adjustable in length from 2 inches to 14 inches - ensure the device will stay with you at all times.
Designed for Dashboard Magnetic Mount Base: Volport rectangular 3M adhesive sticky fit 95% stick-on dash magnetic phone car mount holder with rounded rectangle base on the market. When your magnet dashboard car holder lost its viscosity, these backup mounting adhesives is a good way to re-stick dashboard car phone mount. Size: The length is 1.85", the width is 0.87", the thickness is 0.047". Can be cut to fit phone socket car mount base as well.
Heat Temperature Resistance: This dashboard car mount sticker is high temperature(120℃+) resistance, can be use in hot Summer Texas. Strong dashboard mount 3M VHB adhesion pads's stickiness is 40% stronger than original sticky glue, stable and secure even driving your uber, truck, jeep, vehicle in bumpy roads. Can be uesed for christmas garland, christmas gifts, christmas wrapping paper, christmas window stickers, christmas decorations.
【2 Pack】 Package include 2 pack of 95MM diameter base disc+2 Pack of 80mm Clear Double sided adhesive+2 Free cleaning Pad.
WHERE TO USE? When you mount your car phone mount on dashboard, Your sucker is not strong enough and fall off often? Try MeetRade Mounting pad and super adhesive for lock sucker. Never fall again!
Industrial strength waterproof 3M VHB 5952 adhesive mounts which can attach to almost any surface. 3M Sticky Pads with 44mm x 34mm dimension, 1.1mm thickness and Black colored. It also comes with a Canopus brand box opener (1 PCs)
HOW TO APPLY: The surface must be dry and clean to maximize adhesive contact. After applying one side of the tape to the desired surface, the bond strength will increase as the adhesive flows onto the surface. Please wait before bonding the other side of the tape for the duration given below to let the tape support a maximum weight. WAITING TIME: At room temperature, 50% of the ultimate strength will be achieved after 20 minutes, 75% after 60 minutes, 90% after 24 hours and 100% after 72 hours.
Premium Material: Made of ABS plate and strong adhesive, durable and for long time use. Diameter: 8cm /3.15 Inch. Upper part ABS plate provides smooth and flat surface. The bottom strong sticky PE foam adhesive fixed dashboard textured surface.
Wide Compatibility: Could be applied to the smartphone mount, car camera, GPS suction mount and more. It performs perfect at any seasons. Heat-resistant and moisture-resistant. It could adhere to vertical surfaces, soft-touch dashboards and windshields.
Product packaging: Contains 50 pieces of silicone bumper pads, a sufficient quantity, compact and transparent for a variety of uses. Each bumper has a diameter of 0.6 cm / 0.2".
Material: made of high quality transparent silicone, soft texture, safe and soft, can be matched with any furniture.
【Designed for Suction Cup items】Volport 90mm large size heat temperature resistant 3M sticky adhesives paper for dashboard windshield suction cup mount, make your sucker stronger. You can also adhere the grey adhesive foam tape to the dashboard pad mounting disk. Applicable to most suction cup dashboard stand and windshield long arm mount of dash cam, Action camera, rear view camera, backup camera, GPS navigator, mobile phone, sink sponge holder, basket. You can also cut it to the size you need.
【Genuine 3M Sticky Adhesive Circles 】These 3M VHB very high bond strength double-side adhesive backing stickers for dash cam mount back have high temperature(120℃+) resistance performance, even in Texas, you can use it no worry in hot summer.Stickiness is 40% stronger than ordinary glue, make sucker with super strong suction force. The tape is waterproof, fit for DSLR sports action Cameras, sink caddy, iPad, widely install your DSLR on window, mirror, dashboard even exterior of auto or truck.
【For 2.5" Into a 3.5" HDD / SSD Mounting Frame】Compatible with all brands 2.5 inch SATA hard drives (SSD and HDD) to internal 3.5 inch slot, compatible with SATA I & II. Fit in any desktop computer or device with 3.5 inch internal drive bay
【SATA Data and Power Cable】Sata cables made from high-quality aluminium. Fast and interference-free data and power transmissions , easy to install. Included 4 pin to SATA power adapter cable, approx 60cm SATA 3 cable (1.5 Gbits / 3 Gbits / 6 Gbits) for Connect your SSD (Solid State Drive) or 2.5" notebook hard drive to your PC or Computer
【What You Will Get】We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care! If you have any issue about the item, please contact us by e-mail, we will try our best within 24 hours to reply
【 Perfect Compatibility 】The trailer plug bracket is perfect suitable for European Style 7 pin 13 pin trailer socket. Perfect match to your trail connector, great solution for the problem of holding your trail connector
【Material】The trailer socket bracket is made of high-strength metal, which is rust-proof and durable. It is protected by a corrosion-resistant durable black gloss coating.
【Size】The size of the bunny sticker is 90*72*40mm. Please pay attention to the size before placing the order.