Visua euro transformer
1-3 of 120 results

ALMOCN 4PCS 3D Printer Cooling Fan,4010 Blower 40 x 40 x 10mm Hydraulic Bearing Brushless DC Cooling Fans for 3D Printer,24V

• Size:40mm*40mm*10mm(L*D*H), Speed:8000RPM, DC 24V.
• Connector: 2 Terminal Connector with 2pin-ph2.5

ALMOCN 120PCS Breadboard Jumper Dupont Wire,Multicolored 10cm 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino

• The 10 colour repeat clear carrier colour coded 40 PIN ribbon cable, which can be separated into single wire or multi - strand combination for various usages.easy to identify each wires in your DIY or prototype.
• Cable material: 12-core pure copper wire,premium quality and safe,saving space and weight.

ALMOCN 120PCS Breadboard Jumper Dupont Wire,Multicolored 30cm 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino

• The 10 colour repeat clear carrier colour coded 40 PIN ribbon cable, easy to identify each wires in your DIY or prototype.
• Cable material: 12-core pure copper wire,premium quality,saving space and weight.

4PCS Raspberry Pi Fan,ALMOCN Raspberry Pi DC Brushless Cooling Fan 3.3V 5V Heatsink Cooler 30x30x7mm for Raspberry Pi 4, Pi 3 B+, Pi 3B, Pi 2, Pi B+

• Working voltage: 3.0-5.8V; Current: 0.18A. Air volume: 5m3 / h; Number of revolutions: 13200RPM. It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
• Upgrade bearing of this fan not only can make sure outputing a lot of wind,but also quiet enough.

Small Laundry Cloth Hamper Sorter Basket Bag Bin Foldable 3 Sections with Aluminum Frame 25'' × 14'' x 22'' Washing Storage Dirty Clothes Bag for Bathroom Bedroom Home (White+Grey+Black)

• 600D Oxford + PE Waterproof Laundry Hamper
• 3 sections large capacity blanket laundry baskets - Divided into 3 sections laundry hamper，so you can sort your dark, color from light as you drop clothing into the bags. Each laundry bag can hold up to 2 standard size loads of laundry.

ALMOCN 5 x SG90 Micro Servo Motor 9G for RC Robot Helicopter Aeroplane Compatible with Arduino Raspberry Pi

• SG90 is a high quality, cost effective servo for all your mechatronic requirements. It comes with a 3-pin power and control cable.
• SG90 9G Micro Servo Motor for RC Helicopter, Micro Robot, Robot Arms and Boats Fit for all types of R/C toys and also make electronics DIY based on compatible with Arduino, Raspberry Pi

ALMOCN 5pcs MCP2515 CAN Bus Module TJA1050 Receiver SPI Module DC 5V Power Supply Converter for Arduino 51 MCU ARM Controller Development Board

• This version of the MCP2515 Breakout solves some of the board's problems. 120 ohm terminal resistors. With Impedance matching, ensures the drive capability, long distance data transmission prevents signal emission
• High Power High Efficiency: Supports CAN V2.0B specification, the communication speed 1Mb/s. High reliability, strong vibration resistance, good electromechanical performance. 0 to 8-byte data field. With standard frame, expand the frame and remote frame.

5A Step Down Power Module Constant Voltage Current Voltage Regulator Buck Converter Voltage Stabilizer Transformer with USB Port and Digital Display

• High reliability, strong vibration resistance, good electromechanical performance.
• Maintain stable output voltage and limit the output current over a range of input voltages.

ALMOCN 4PCS 2" 4Ohm 3W DIY Small Full Range Audio Speaker Stereo Woofer Loudspeaker for Arduino and DIY Speaker

• 4PCS 2" 4Ohm 3W Full Range Audio Speaker Stereo Woofer Loudspeaker.
• Rated Power: 3W;Rated Impedance: 4 ohm

ALMOCN 6PCS 3.3V 5V MB102 Breadboard Power Supply Module DC 6.5-12V USB for Arduino Solderless Bread Board

• Breadboard power supply module, for Ar-duino board solderless breadboard. The module provides dual 5V and 3.3V power rails, and has a multi-purpose female USB socket, convenient external lead use.
• Input Voltage: DC 6.5-12V; Output Voltage: DC 3.3V 5V; Input do not exceed 700mA, Locking ON / OFF Switch, no need to unplug the power adapter, LED Power Indicator indicated when the board is powered up.

car Door Handle 701837020A for VW Transporter T4 Euro Van 1990-2002 Gray Interior Inside Inner Door Handle Front Left + Right car Inside Inner Door Handle (Color : A Set Gray)

• With its direct-fit design, installing the handle is a breeze.
• OEM part number 701837020A.

Car Tail Wing Decoration Universal Rear Roof Spoiler Lip 1.2M/1.5M Car-Styling Carbon Fiber Soft Tail Trunk Wing DIY Refit Car Tools (Color : 1.2m Bright Black)

• No drilling required, no cutting required.
• Universal Rear Roof Spoiler Lip Car-Styling Carbon Fiber Soft Tail Trunk Wing DIY Refit Car Tools made by Rubber.

AVLIK car Door Handle 7H0867171B for VW Transporter T5 for Caravelle for Eurovan MK1 2003–2010 Front Interior Door Handle Grab Pull Left and Right car Inside Inner Door Handle (Color : Left)

• With its direct-fit design, installing the handle is a breeze.
• OEM part number 7H0867171B.

Car Splash Guards For F&ord For Ecosport 2 MK2 2013~2022 Mudguards Mudflap Fender Flare Mud Flaps Guard Splash Fenders Car Stying Accessories (Color : Facelift Model 2017-2022)

• Easy to install, no modification required.
• For F&ord For Ecosport 2 MK2 20132022 Mudguards Mudflap Fender Flare Mud Flaps Guard Splash Fenders Car Stying Accessories.

AVLIK car Door Handle for VW for Golf 5 for Jetta MK5 Two-Door 2004 2005 2006 2007 2008 2009 Car Door Switch Panel Door Inner Handle car Inside Inner Door Handle (Color : Only a Left)

• With its direct-fit design, installing the handle is a breeze.
• For VW For Golf 5 For Jetta MK5 two-door 2004 2005 2006 2007 2008 2009.

Mudflaps 50Pc 8mmX8.5mm Square Auto Fastener Car Bumper Clips Retainer Car Fastener Rivet Door Panel Fender Car Fender

• 50Pc 8mmX8.5mm Square Auto Fastener Car Bumper Clips Retainer Car Fastener Rivet Door Panel Fender
• Protection function: Protect your body from road mud, snow, sand and sewage.

Mudflaps 100Pcs Auto Fastener 7mm Hole Door Trim Panel Plastic Clips Rivets Retainer Car Fender Bumper Car Styling Car Fender

• 100Pcs Auto Fastener 7mm Hole Door Trim Panel Plastic Clips Rivets Retainer Car Fender Bumper Car Styling
• Protection function: Protect your body from road mud, snow, sand and sewage.

Mudflaps For Skoda For Octavia A5 2004-2012 Car Mud Flaps Mudflaps Splash Guards Car Fender

• For Skoda For Octavia A5 2004-2012 Car Mud Flaps Mudflaps Splash Guards
• Fenders also protect your car from dust/mud in everyday road use.

Seat Cover Sets For Peugeot For Expert Leather Car Seat Covers Waterproof Single And Double Van Seat Covers Universally Seat Covers Front And Rear (Color : 5PCS VAN COVER)

• Our car seat cover is designed to provide the ultimate comfort for your driving experience.
• For Peugeot For Expert Leather Car Seat Covers Waterproof Single And Double Van Seat Covers Universally

AVLIK Phone Holder For Forza 125 For Forza350 2020 2021 Motorcycle Accessories Windshied Mount Navigation Bracket GPS Smartphone Holder Motorcycle Phone Mount (Size : A)

• For Forza 350 2020 2021
• For Forza 125 2021 2022

Morco GB 24/30 & GB24/30 Series 2 (Check Serial No. On ErP Models) Ignitor Unit ICB308001 - Hanicks

• Morco GB 24/30 & GB24/30 Series 2 (Check Serial No. On ErP Models) Ignitor Unit ICB308001 - Hanicks
• Morco Part No. ICB308001

220V Ignition Transformer Voltage Pulse Igniter Transformer High Voltage Oil Burner Ignition Output 15kv WalonTek Eit210K

• Power input: 220V-240V,230V~0.25A 50HZ output:15KV
• Used for ignition of diesel, methanol, waste oil fuel, etc.

TEENGSE Hot Rod Ignitor, KIT0255 Ignitor Replacement, Grill Ignitor Compatible with Ironwood 650 885 Pro 575 780 Timberline 1300 DC Timberline 850 DC

• 【SUITABLE MODELS】:The ceramic hot rod ignition is compatible with TraegerIronwood 650 Ironwood 885 Pro 575 Pro 780 Timberline 1300 DC Timberline 850 DC GEN 2 MODELS.
• 【NOTICE】:Hot rod ignitor Kit is a replacement ignitor for Traeger pellet grills with a DC drive motor. only the newer Traeger pellet grills have this igniter. Please check your model number carefully before placing an order.

easyhaha 30 * 5.5 * 8mm Spray Gun Stove Accessories Piezoelectric Fire Wire Copper Cap Electronic Igniter 5Pcs

Push Button Igniter Ignitor, Plastic Lighter Cap Lighter Cap Cap, Plastic Universal AA Battery Gas Fire Pit Ignitor Caps Replacement for Spark Generator Gas Grill Black

• Reusable and Durable:It can be used repeatedly and durable for long time use
• Compatibility:It is perfect for 1/2/3/4/5/6 outlet of gas grill, and you can replace it with new lighter cap

Compasty 220-240V Gas Stove AC Pulse Igniter with Safe Four Terminal Connections Tool

• Model Number: AC Pulse Igniter for Gas Stove
• From 4/6/8 sockets for connection to spark plugs

Peowuieu DC3-5V DIY Kit High Voltage Generator Arc Igniter Lighter Kit for DIY Electronic Production Suite

• Input Current:3A
• Name:HV-1 high voltage igniter

Akozon Nexgrill BBQ Igniter Push Button,Grill Ignitor,BBQ Black Plastic Lighter Ignitor Cap Repable Gas Grill Barbecue Spark

• Made of plastic and it is safe and non-, and durable
• 【REUSABLE & DURABLE】 It can be used repeatedly and durable for l time use

Heavy Duty PP200 HA1000 102548 Hot Surface Igniter for Desa Torpedo Reddy Master Heater HSI PP200SC 71-052-0700

• Part numbers：PP200, HA1000, 102548-01, 102548-02, 102548-03, 102548-04, 102548-05, 102548-06, 102548-07,PP200SC
• Fits All-Pro,Desa,Dayton,John Deere,Master,ProCom,Reddy,Remington,Sears ,and many others models.

Fegtrty 3X DC3-5V DIY Kit High Voltage Generator Arc Igniter Lighter Kit for DIY Electronic Production Suite

• Name:-1 high voltage igniter
• Operating Current: Less than =2.5A

Witeg Charger for Electric Pipet Pet Aid Witoped EP

• Charger
• Suitable for Witeg pipet tier aid Witoped EP

Single Power Transformer, AC 12V/24V Output Voltage, Flame Retardant Nylon, Full Copper Wire, Vacuum Impregnated Insulation Varnish for High Temperature and High Voltage (12V)

• [] - 100% brand new and power transformer.
• [Versatile Output] - Can transform AC 220V input voltage to AC 12V/24V output voltage.

Pipette, Laboratory Pipette, Manual Laboratory for Biotechnology Laboratory Clinical Diagnostic Laboratory Food Laboratory

• Large and clear 4-digit digital display window, clear digital display, easy to operate.
• It can be widely used in clinical diagnostic laboratory, biotechnology laboratory, pharmaceutical and laboratory and food laboratory.

Pipette, Pipettor, Adjustable Single-Channel Manual for Biotechnology Laboratory Clinical Diagnostic Laboratory Laboratory Food Laboratory

• Large and clear 4-digit digital display window, clear digital display, easy to operate.
• The tools provided are easy to calibrate and maintain, and easy to calibrate.

Laboratory Pipette, Single-Channel 100-1000μl Pipette, Manual Chemical Laboratory for Clinical Diagnostic Laboratory Food Laboratory Biotechnology Laboratory

• Professional manufacturing, stable performance, can prevent internal pollution and pipette damage.
• According to ergonomic design, soft handle, durable, long service life.

Sdfafrreg 1/10 Seats, RC Car Fine Workmanship for Axial Wraith 90018 90031 90045 90056

• Good Material: Made of plastic material, exquisite workmanship and very practical, an excellent accessory for your RC cars.
• Better Design: Small size, lightweight, increases the fun of use, does not affect the driving of the model car, easy to use.

Neolab Electric 6404 COMBI Tip Advanced 2 – Green (Pack of 100)

• Individual colour code
• Extended Spitzen bring more flexibility

VACSAX Digital Pipette Multi-volume Adjustable 0.1μl-10ml Micro Pipette Laboratory Equipment, High Accurate Lab Pipettes, Lab Micropipette,0.1~2.5μl

• ❤【DIGITAL WINDOW】4-digit digital window display, the range setting is clear at a glance.
• ❤【PRECISE LIQUID ASPIRATION】The pipette sucks liquid accurately and has a blow-out function when discharging liquid to avoid liquid residue. The digital window ensures that you can read clearly at a glance.

Neolab 7 4424 Pipetman G Mikrovo Luneo Lab Men's Kit

• Gilson Pipetman g P20G, P200G and P1000G
• Tips D200 and D1000 in Tippack stand

VACSAX 0.1μl-10ml High-Accurate Micropipette, Capacity Protection Lock/Lock Range, 4 Digit Window, Lab Micropipette, Lab Single Channel Pipettors,1~10ml

• ❤【AUTOCLAVING AT 121°C】Sterilise pipette halves by autoclaving at 121°C for 20 minutes at 1 bar atmospheric pressure.
• ❤【INTERCHANGEABLE COLOUR CODING】Multiple colour coded labels to mark the different liquids aspirated by each pipette for easy differentiation of experiments.