Compatibility: These Model Car Ladder Compatible with Ford Bronco TRX4 90046 90047 KM2. Size: 88x27x17mm
Material: These mini stairs are made of metal with matte black finish, which can effectively isolate oxygen in the air, strong and corrosion-resistant.
High Quality Hardened Steel Nozzle + High Temperature Capricorn PTFE Kit With Free Protective Case.
Wear resistant Hardened Steel Nozzles & Capricorn PTFE - regarded as Top to withstand printing High Temperature filaments such as ABS, Nylon, Poly-carbonates and more.
[What could you expect for Economical 3D Printer]The 500mm/s highest printing speed, 20000mm/s² acceleration, Klipper firmware installed, Corexy structure. Open source and stronger scalability provide powerful supports for creating innovative.
[High precision and more stable]The same use of dual Z-axis structure support, while the extruder equipped with a gear ratio of 9.5:1 , max 300℃ nozzle temperature, achieve the 3x extrusion flow. Add Input shaper, pressure advance and automatic leveling for excellent resolution. Printing accuracy compared to the previous printers, an increase of 20% even in high-speed printing.
【PET Filament Filled Carbon Fiber】15% Carbon Fiber is combined with 85% PET to form a strong filament which has low moisture absorption, high strength, creep resistance, excellent chemical resistance and high heat resistance. Carbon Fiber PET filament has higher rigidity and strength than normal PETG filament.
【Carbon Fiber Filament - Tangle Free】Full mechanical winding and strict manual examination ensure tangling free and avoid filament breaking and snapping. It is no warpage and no shrinkage and no smell, no heating chamber are required during the printing process.
【12x Faster and More Efficient 】The new PLUS3 is a high-performance, high-speed, commercial-grade 3D printer.It uses Klipper firmware and CoreXY architecture to reduce printing time by 80%.
【Independent Heating Device Maximum Temp 65℃】Equipped with a drying box, the independent chamber heating system can heat the chamber to 60°C in 25 minutes, the internal structure and hardware is made to resist high temp.
【Special Design】: Excellent design——In a spring steel plate using 2 different materials, one side of smooth film can produce mirror printing effect, the other side of textured spraying, produce matte printing effect, Compared with the same materials design, it is more cost-effective.
【Proven Solution】:No glue, No tap, when hotbed temperature reaches 60℃ ,materials such as PLA,80℃ PETG,and 130℃ ABS will stick well, and after printing, when spring steel PEI build plate cools to room temperature, it's easy to remove the printed matter from the platform by bending slightly. Through hundreds of experimental tests, repeated use is still new.Note:The adaptation temperature of different materials is different. Please adjust it reasonably.
【PETG filament 1.75 - Suitable for High-speed Printing】Compared to ordinary PETG filaments, QIDI TECH PETG-Tough has high fluidity and requires lower extrusion pressure during the printing process, making it ideal for achieving high speed printing, with a printing speed of up to 400mm/s. We highly recommend to use it with QIDI TECH's newly developed X-Max3 3D printer.
【Toughness-enhanced PETG 3D Printer Filament】PETG-Tough has been modified for toughness and its notch impact strength is more than three times that of ordinary PETG. Thus the improved QIDI TECH PETG-Tough 3D printing filament is a rigid, tough, high-performance material with odorless, high impact resistance and high heat resistance.
【Powerful Performance & System】➨WEIDIAN has many years of experience in the Mini computer field. Powerful Mini PC has built fan and AMD Ryzen 9-5900HX (8 cores and 16 threads, Frequency: 3.3GHz-4.6GHz), Mini PC Support Wake On LAN and Auto Power On, pre-install Windows 11 Pro, but also support changing to other OS, like Windows 10, Linux, a deal and reliable partner for your work and life.
【Scalable & High-Speed Storage】➨Mini PC has dual channel DDR4 RAM(64GB MAX, Operating speed up to 3200MHz) and dual channel M.2 2280 SSD ROM(NVMe1 support M.2 SATA/NVME Protocol SSD, NVMe2 only support NVMe Protocol SSD, M.2 SATA SSD is installed by default), Micro PC also support to flexibly expand storage by adding 2.5" SATA SSD/HDD(2TB MAX) or Inserting a mobile hard drive into USB3.0/2.0 interface, which is the perfect portable partner for games, daily tasks, email and surfing.
【AMD Ryzen 9 5900HX Processor】Baieyu mini pc Windows 11 pro is the perfect combination of performance, flexibility and portability. It is powered by AMD Ryzen 9 5900HX Processor (3.3GHz to 4.6GHz, 16MB L3 Cache, 45+W TDP). The powerful GPU AMD Radeon Graphics 2100 MHz and pre-installed Windows 11 Pro, provide great graphics performance.
【Larger Memory + Expandable Storage】: The mini computer is equipped with dual-channel DDR4 memory, expandable up to 32GB x 2. The micro pc is designed with 2 M.2 2280 slots (slot type: PCIE3.0 x 4), the NVME1 slot supports M.2 SATA/NVME SSD, and the NVME2 slot only supports NVME SSD. It also supports expanding your storage space to 2TB (hard disk thickness not exceeding 7mm) via 2.5-inch SSD/HDD (not included in the scope of supply) to obtain massive storage space.
✔Creative Motherboard & Safety Power Supply: BIQU 3D Printer uses the most cost-effective BIGTREETECH 32bit motherboard which is brimming with possibility, such as WIFI connectivity, Double z-axis, etc. You can enjoy most DIY needs. B1 3D Printer comes with a UL Certified MeanWell power supply, protecting your printer from unexpected power surges.We also use the TMC2225 silent drive which can let you print models while resting.
✔Patented Removable Build Plate: BIQU B1 3D Printer uses a removable magnetic build plate that is easy to stick, easy to take, wear-resistant, magnetic, deformable, and longer life. Whether it is a small and thin, or a large and heavy print model, it can be easily stuck and removed on the hotbed without wasting filaments and time. Since it can quickly heat up and start printing within 5 minutes, which means that you can save time waiting for heating.
✔️Low Odor, Safe and Environmentally Friendly: PLA is derived from crops such as corn and sugarcane. It is renewable. The most important thing is that it is biodegradable, does not contain volatile organic compounds, does not contain harmful chemicals, and will not endanger human health.
✔️Strong Toughness & Less Tangles: BIQU PLA 1.75mm filament is a high-performance PLA material with strong toughness.100% no tangles. Fully mechanical automatic winding, stable fixing holes, strict manual inspection, to ensure neat lines, less tangles, and avoid breaking and breaking. The larger inner diameter of the spool is designed to easily leave the spool without any cross turning, and the feeding is smoother, meeting your needs for free printing.
💗【Break Detection Function】Smart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure caused by the abnormal extrusion of filament.
💗【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. What’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH.
✔【Upgrade Accuracy】BIQU PLA’s ±0.03 mm tolerance is consistent, it is flexible yet strong. Minimum tolerance and low warping to ensure consistent feeding and stable prints, high successful rate, reducing the visibility of printed layer lines and gives a outstanding appearance and highly precise to all prints.
✔【Excellent Quality】 Designed and manufactured with a clog-free patent to guarantee a smooth and stable printing experience with this PLA filament. BIQU PLA filament is compatible with most of FDM 3D printers, such as: Ender 3, Prusa, MakerBot, UltiMaker, Simplify3D, Flashforge, etc. Let's have a smooth printing of filament and experience the fun of printing achievement!
【Advantages of H2 Extruder】 Retain the advantages of Direct extruders,The control of feeding is more accurate than remote extrusion and more precise back pumping.What’s more, the torque requirements for extruded stepper motors are comparatively low, and the material exchange is convenient
【Overcome the shortcomings of heavy Extruder】Usually the extruders of 3D printer is quite heavy,especially the dual-head printer, which has a large inertia in motion and is relatively difficult to accelerate deceleration, so it have to use a lower printing speed to ensure accuracy. But our H2 extruder with a light weight,which can solve this problem easily.
1. Hermit Crab CAN is an upgraded version of Hermit Crab. It improves the terminal board, making wiring more convenient.
2. Functions: 8P bolt terminal (heating cable+thermistor+2 fan interfaces) + 4P filament runout detection + 5P BL touch + 4p motor cable. For more expansion of printer head functions.
【High-quality material】The 3D printer CR-6 SE brass nozzle is made of high-quality brass material,which is strong and durable.Has good heat resistance,wear resistance and corrosion resistance,easy to install and replace,suitable for high temperature 3D printing
【New design】CR-6 SE brass nozzle Adopting advanced processing technology,the nozzle is designed in a smooth feeding surface,and the round hole feeding chamfer is adopted,which greatly reduces the frictional resistance to the filament,so that the 3D filament feeding is smoother,and the printing model is smoother and more delicate
Boost Your 3D Printing Efficiency with Manta E3EZ + CB1 -V2.2 Kit.This kit is designed for Ender-3, Ender-3 Ender-3 Pro, BIQU-B1 3D Printers,high-performance
The Manta E3EZ main control board and core board use BTB- connection, which can be perfectly paired- with the CB1 core board.The CB1 core board is equipped with quad- core 64 bit ARM Cortex-A53 @ 1.5GHz processor, 1GB DDR3 memory chip; Onboard-100M Ethernet- interface and supports WIFI transmission.