THE MOST ACCURATE WEIGHT MANAGEMENT - Independent research has shown FitTrack consistently measures +/-3% off from the DEXA scan, the Gold Standard, in measurement. This accuracy makes it the most accurate smart scale available today. FITTRACK digital bathroom scale is based on Dual BIA technology that uses 2 frequencies to accurately measure body measurements. It is accurate up to +/- 250 gr. FitTrack has been certified by FCC, CE, KC, and FDA
17 VITAL BODY HEALTH DATA MEASURED - Our weighing scale can measure up to 400 pounds (181,437 kg). With FitTrack Dara smart scale and the FitTrack Health app, results are tracked for up to 8 people while individual results are kept private. FitTrack Smart body fat scale measure 17 essential health factors (weight, body fat, muscle weight, hydration, bone mass, muscle mass, visceral fat, BMR, BMI, protein rate, metabolic age and obesity level) using Smart-Step technology
✅10Gbase-T Module: 10Gb/s SFP+ to RJ45 Ethernet Copper Transceiver,support links up to 30m (98 Ft) over Cat6a/ Cat7 cable. SFF-8431 and SFF-8432 MSA Compliant,IEEE 802.3az Compliant.
✅Wide Compatible: For Cisco SFP-10G-T-S, Meraki, MikroTik, Ubiquiti UF-RJ45-10G, Unifi, Fortinet, Netgear, TP-Link and Other Open Equipments with 10G SFP+ Port.
Wide Compatibility: Compatible for Cisco SFP-10G-T-S (NOT support on Cisco Nexus Series and Cisco Meraki Series), Ubiquiti UF-RJ45-10G, Netgear AXM765, D-Link DEM-440XT, TP-Link, Supermicro and Other Open Switches.
10G SFP+ to RJ45 Copper module for CAT6A/CAT7/CAT8 cable, copper RJ-45 connector. Supports 1000Mbps rate for using Cat 5e cable or better. (30 meters via 10Gbps, 50 meters via 5Gbps and 2.5Gbps, 100 meters via 1000Mbps.)
4 Pack 10GBase-SR SFP to LC Multi Mode Data Rate:10G; Wavelength: 850-nm Multi-Mode module; Port Type: LC/UPC; Reach: up to 300m using 50/125um Multi-Mode Fiber, Supports full-duplex Fiber Type: Dual LC OM3/OM4 multi-mode fiber.
Compatible with MSA compliant equipment from Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UF-MM-10G, Mikrotik, D-Link, Huawei, Netgear, Supermicro and More; CONNECTIVITY: 10G BASE-SX SFP transceiver for multimode fiber, 850 nm wavelength, supports up to 300m.
10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 0.5-meter, AWG30.It's a good alternative to fiber over short distances, with low-cost, low power consumption and low latency.
The 10G SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports (cannot be used in gigabit SFP ports) for Network Attached Storage, Storage Area Network, and High Performance Computing.
✅10Gbase-T Module: 10Gb/s SFP+ to RJ45 Ethernet Copper Transceiver,support links up to 30m (98 Ft) over Cat6a/ Cat7 cable. SFF-8431 and SFF-8432 MSA Compliant,IEEE 802.3az Compliant.
✅Wide Compatible: For Cisco SFP-10G-T-S, Meraki, MikroTik, Ubiquiti UF-RJ45-10G, Unifi, Fortinet, Netgear, TP-Link and Other Open Equipments with 10G SFP+ Port.
Wide Compatibility: Compatible for Cisco SFP-10G-T-S (NOT support on Cisco Nexus Series and Cisco Meraki Series), Ubiquiti UF-RJ45-10G, Netgear AXM765, D-Link DEM-440XT, TP-Link, Supermicro and Other Open Switches.
10G SFP+ to RJ45 Copper module for CAT6A/CAT7/CAT8 cable, copper RJ-45 connector. Supports 1000Mbps rate for using Cat 5e cable or better. (30 meters via 10Gbps, 50 meters via 5Gbps and 2.5Gbps, 100 meters via 1000Mbps.)
4 Pack 10GBase-SR SFP to LC Multi Mode Data Rate:10G; Wavelength: 850-nm Multi-Mode module; Port Type: LC/UPC; Reach: up to 300m using 50/125um Multi-Mode Fiber, Supports full-duplex Fiber Type: Dual LC OM3/OM4 multi-mode fiber.
Compatible with MSA compliant equipment from Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UF-MM-10G, Mikrotik, D-Link, Huawei, Netgear, Supermicro and More; CONNECTIVITY: 10G BASE-SX SFP transceiver for multimode fiber, 850 nm wavelength, supports up to 300m.
10GbE SFP+ to SFP+ DAC Direct Attach Copper Twinax Cable, Passive, 0.5-meter, AWG30.It's a good alternative to fiber over short distances, with low-cost, low power consumption and low latency.
The 10G SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports (cannot be used in gigabit SFP ports) for Network Attached Storage, Storage Area Network, and High Performance Computing.