Car Ingition & Tools
9-10 of 400 results

NSGMXT Pair Rear Brake Calipers Left & Right Compatible with Zafira/Zafira Family FWD B A05 FWD Mk II B A05 Diesel Petrol MPV Zafira 93183696 93187068 93183697 93187069

• Replacement Part Number: Left Side: 93183696, 93187068, 5542451, 5542466, 4193183696;
• Replacement Part Number: Right Side: 93183697, 93187069, 5542452, 5542467, 4193183697.

A4 Photo Blueprint Morris 8 Tourer Cabriolet 1935

• A4 (8.25 x 11.75 inch / 21cmx30cm) or 10x8 inch Photo Print
• Printed on to 270gsm high quality photo GLOSS card, borderless (to the edge) finish

500Pcs Head Screw, CM Head Screw Sorting Kit, 10 Specifications, With Black Screwdriver Fastener Hardware

• TRANSPARENT STORAGE BOX: This collection is arranged in a transparent storage box by size for quick access and protection.
• HIGH-QUALITY CARBON STEEL MATERIAL: High-quality black carbon steel material, durable, environmentally friendly, and pollution-free.

Frankberg Brake Caliper Rear Right Compatible with Daily III Bus 2.8L-3.0L 1999-2006 Daily III Box 2.3L-3.0L 1999-2007 Daily IV Box 2.3L-3.0L 2006-2012

• 【Vehicle Fitment】Compatible with Daily III Bus 2.8L-3.0L 1999-2006, Daily III Box 2.3L-3.0L 1999-2007, Daily III PRITSCHE/CHASSIS 2.3L-3.0L 1999-2006, Daily IV Box 2.3L-3.0L 2006-2012
• 【Vehicle Fitment】Compatible with Daily IV Kipper 3.0L 2006-2011, Daily V Box 2.3L-3.0L 2011-2014, Cabstar F24 2.5L 2006-2012, Master II Box FD 3.0L 2005-2020

Healeved 10pcs Replacement Rubber Tips for Glass Running Pliers and Key Fob Pliers Hardware Install and Stained Glass Work Supplies and Tools Accessories

• Practical glass pliers rubber tips are suitable for all kinds of glass broken scenes, such as household decoration and construction sites, etc.
• Using rubber materials, the glass pliers tips are not easy to deform or break, reusable for long time.

Crossed Screw 500Pcs Flat Head Cross SelfTapping Screws Set 410 Stainless Steel Phillips Drive Thread Fastener Fittings M4.2x25mm Screws

• Application: It can be knocked into various square tubes, colored tiles and various iron plates, and its hardness is about HV300 degrees.
• Practical Tool: Features deep thread, uniform pitch, stable force and good tightening force, dependable to use. Suitable for square tube, color steel tile and iron plate with hardness around HV300.

Frankberg 2x Brake Calipers Front Left and Right Compatible with A-Klasse W168 A140 1.4L 1.6L 1997-2004 A-Klasse W168 A160 1.6L 1997-2004 Replace# 1684200283 1684200383

• 【Vehicle Fitment】Compatible with A-Klasse W168 A140 1.4L 1.6L 1997-2004, A-Klasse W168 A160 1.6L 1997-2004
• 【Note】For A-Klasse W168 A140 Hatchback with Long Wheelbase

DISCOVERY 1 FRONT OR REAR BRAKE CALIPER BOLTS BOLT SET X4 SYP500090

• DISCOVERY 1 FRONT OR REAR BRAKE CALIPER BOLTS BOLT SET X4 SYP500090

UNIVERSAL CAR REAR DRIVE DISC BRAKE PISTON REMOVER - VERSATILE MULTIFUNCTIONAL TOOL FOR BRAKE SYSTEM MAINTENANCE

• [VERSATILE TOOL FOR BRAKE SYSTEM MAINTENANCE] Replace rear disc brake pads or rotors with ease using this multifunctional disc brake piston remover.
• [ROBUST CONSTRUCTION] Made of durable carbon steel for added strength and longevity.

Multifunctional Disc Brake Piston Remover for Car Rear Drive, Universal 3/8in Brake Piston Spreader

• [IDEAL BRAKE SYSTEM MAINTENANCE TOOL] Whether you're replacing your rear disc brake pads or rotors, this multifunctional disc brake piston remover is the perfect tool for the job. Its sturdy construction and ease of use make it a must-have for any automotive enthusiast.
• [SIZE AND FUNCTION] With a compact size of 1 x 1 x 1in and a medium flight of 0.4in, this disc brake piston remover offers 6 different surfaces for various purposes. It is suitable for different types of brake pumps and is compatible with 3/8in drive ratchets and extension bars.

Accusize Industrial Tools H.S.S. Corner Rounding End Mill Set Size from 1/16 inch to 3/8 inch, 8 pc, 1011-0008

• Intended for use in milling rounded corners
• Form-relieved type; can be sharpened repeatedly without changing the form.

sourcingmap HSS-AL Corner Rounding End Mill Cutter 2 Flute with 2mm Radius, 10mm Shank

• Use in milling rounded corners
• Formed radius cutter. Right hand cut

Milling Router Bit Set, 4pcs M6 /M8 /M10 /M12 High Strength Wear Resistance 4 Flutes HSS Roughing End Mill CNC Router Bit Cutting Tool for Industrial Milling Machine Accessories

sourcingmap 5mm Radius 80mm Long 4 Flutes Straight Shank Corner Rounding End Mill

• Weight: 130g; Material: HSS-AL; Package Content: 1 x Corner Rounding End Mill, 1 x Plastic Case
• Product Name: Corner Rounding End Mill; Shank Diameter: 16mm/0.6"

NITVIA 1pc Corner Rounding End Mill R Angle HSS Radius Milling Cutter R1 - R12.5 Milling Tool R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R12 (Size : R6)

• Corner Rounding End Mill R Angle HSS Radius Milling Cutter R1 t-R12.5 Milling Tool R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R12
• 1. Material: Aluminum containing high speed steel

Carbide End Mill, Face End Mill Set MT3-FMB22 Holder Extension 400R-50-22 Face End Mill Cutter 10pcs APMT1604 CNC Carbide, Corner Rounding End Mills

Aluminum Alloy T Track Intersection Parts Easy to Use, Compact and Portable for Carpentry Work (Silver)

• [Smooth ]: Ensure smooth and labor-saving sliding duringtrack installation.
• [Easy to Use]: Simple assembly for quicktrack formation.

HHIP 5800-4060 3/16" x 1/2" HSS Corner Rounding End Mill

• Intended for use in milling rounded corners, etc
• Form-relieved type; can be sharpened many times without changing the form

4mm to 12mm HSS CNC Straight Shank 4 Flute End Mill Cutter Drill Bit with High Toughness for Copper, Aluminum, Tool Steel, Cast Iron, Suitable for CNC Data Processing Center

• [Improved machine performance] By reducing the number of tool changes and improving machine actuator movement rhythm, this mill cutter enhances machine performance and saves time.
• [Precise and efficient] With its 4-flute design, this end mill cutter ensures precise and efficient cutting, reducing the number of tool changes and saving mold-making time.

Verakee Yuhong-end mills Corner Rounding End Mill HSS Radius Milling Cutter CNC Router Bit, Industrial Grade (Cutting Edge Length : R4.0)

• Type: Corner Rounding End Mill
• Material: High Speed Steel

Kemper Stilt Mark Stone

• Stilt stone (1)
• Stilt stone for cleaning stilt marks left on after firing ceramics in a kiln

Self-Supporting Pyrometric Cones for Monitoring Ceramic Kiln Firings-SSB 05 25 Pack

• Fixed mounting height and angle
• No need for cone holder

TOPINCN 1230℃ Ceramic Craft Kiln Fire-resistant High Temperature Measuring Pyrometric Cones Electric Furnace Accessory

• For example: thermocouple, temperature measuring ring, thermocouple can only measure the radiant heat of the kiln, but not the transfer heat from the kiln, so it measures the temperature of the product's environment temperature, not the product's own temperature.
• Quality: Precise formulas, real material and temperature measurement is more accurate, is composed of more than 100 ingredients, similar to ceramic components.The cone tip sags until it reaches a point level with the base indicating the kiln has properly fired.

Ceramic Cone Temperature Measuring, 2.56x0.39inch Pyrometric Cones for Monitoring Ceramic Kiln Firings Ceramics & Pottery Kilns & Firing Accessories DIY Craft Tools

• Unrestricted: Most of the temperature measuring cones are not restricted by time and space.
• Application Range: It is widely used to measure the sintering temperature of refractory materials, chemical materials, abrasives, magnetic materials, and ceramics.

WOODEN CITY WR342 V-Twin Cruiser Modelling, Wood, 17x8 cm

• This model is created for extremely confident people.
• Made from eco-wood materials

EIOLWJIEO 2pcs Paper Bone Folder Comfortable Grip Multifunctional Portable Creaser Tool for Scrapbooking Paper Leather Crafts

• Tool: refers to a tool used to draw lines on paper before cutting or folding
• Suitable: A simple plastic tool used to make neat wrinkles on paper such as cards and envelopes

Ceramic Refractory Pad, 96 Points Bar Stilt Pottery Kiln Ceramic Refractory Support Pad High-Temperature Ceramic Refractory Support Nails Mat Small Object Firing Kiln Burning Tool for Ceramic Hobbyist

• Package Includes: Each package contains 1pc ceramic refractory pad and 60pcs ceramic refractory nails. Sufficient quantity and the good combination will meet your various ceramic-making requirements and you can also share them with your family members or friends
• Applicable Size: Ceramic refractory pad measures approx. 100 x 100mm/ 3.94 x 3.94 inch, the nail is 20mm/ 0.79 inch, suitable and compact, it can support different ceramic works, proving you with convenient and long time using experience

Pyrometric Cones for Accurate Firings in Industrial, Pottery and Hobby Kilns-Cone 06 (Pkg/50) (1)

• The number of this cone is 06 which bends at an approximate temperature of 1830° F, depending on firing conditions
• Pyrometric Cones are used on a shelf inside a kiln or in a kiln sitter to determine when a firing is complete, if the kiln provided enough heat or if there was a problem during the firing

6 Pieces Insulating Fire Brick for Kilns,Ovens,Forges,Metal Clay Firing,Fire Pit Accessories for Heater, Fireplaces,Jewelry Soldering,Size:9"X4.5"X2.5"

Kiln element pins (12)

• Hold loose kiln elements in place with these easy to insert, sharp-ended pins. These 1.25" pins are of a heat resistant alloy for temperatures to 2500° F (Cone 13). 12 per package.

Bosch Accessories 1608600239 Stone Cup Wheel, 110mm, 90mm, 55mm-24mm

• Appropriate for GBH 10 DC/GBH 11 DE Professional
• Colour: black

sourcing map Grinding Wheel 4 Inch 120 Grits Aluminum Oxide Cup Abrasive Wheels, White Corundum for Hardened Steel, Grinding Machine, White

• Size - Granularity: 120 Grits, Outer Diameter: 100mm / 3.94inch, Inner Diameter: 20mm / 0.79inch, Height: 100mm / 3.94inch
• Feature - The grinding wheel has high accuracy, high efficiency, and good roughness, resulting in less abrasive consumption and long service life.

sourcing map Grinding Wheel 6 Inch 120 Grits Aluminum Oxide Cup Abrasive Wheels, White Corundum for Hardened Steel, Grinding Machine

• Size - Granularity: 120 Grits, Outer Diameter: 150mm / 5.91inch, Inner Diameter: 120mm / 4.72inch, Hole Diameter: 32mm / 1.26inch, Height: 50mm / 1.97inch
• Feature - The grinding wheel has high accuracy, high efficiency, and good roughness, resulting in less abrasive consumption and long service life.

VALVE GRINDING PASTE COARSE FINE GARAGE AUTOMOTIVE TOOLS REMOVE DEFECTS CA64

• Valve Grinding Past
• Coarse & fine

sourcing map Grinding Wheel 5 Inch 60 Grits Aluminum Oxide Cup Abrasive Wheels, Brown Corundum for Hardened Steel, Grinding Machine, Grey

• Size - Granularity: 60 Grits, Outer Diameter: 125mm / 4.92inch, Inner Diameter: 32mm / 1.26inch, Height: 63mm / 2.48inch
• Feature - The grinding wheel has high accuracy, high efficiency, and good roughness, resulting in less abrasive consumption and long service life.

Bosch 1608620055 Grinding Stone Cylin Med Hard, 20mm

• Grinding stone Cylin med hard G60 L20mm
• Content: Grinding stone Cylin med hard G60 L20mm

sourcing map Cup Grinding Wheel 4 Inch 80 Grits Silicon Carbide Cup Abrasive Wheel Green Aluminum Oxide for Knife Sharpening Machine Abrasive Tool

• Size - Granularity: 80 Grits, Outer Diameter: 100 / 4-inch, Inner Diameter: 20mm / 0.79-inch, Height: 50mm / 2-inch
• Material - The cup grinding wheel is made of green silicon carbide, which has the characteristics of wear-resisting, high hardness, strong cutting ability, uniform particle size, high temperature resistance and strength.

sourcing map 2pcs Grinding Wheel 2 Inch 80 Grits Aluminum Oxide Cup Abrasive Wheels, White Corundum for Hardened Steel, Grinding Machine

• Size - Granularity: 80 Grits, Outer Diameter: 50mm / 1.97inch, Inner Diameter: 40mm / 1.57inch, Hole Diameter: 13mm / 0.51inch, Height: 25mm / 0.98inch
• Feature - The grinding wheel has high accuracy, high efficiency, and good roughness, resulting in less abrasive consumption and long service life.

wolfcraft Mounted Stone Set 5 Pcs. I 2142000

• For metals, glass, ceramics, plastic materials
• Material: aluminium oxide

sourcing map 4-Inch Flaring Cup Grinding Wheel 80 Grits White Aluminum Oxide Wheel Surface Grinding Abrasive Wheel Ceramic Tool

• Dimension - Granularity: 80 Grits, Outer Diameter: 100mm / 4inch, Inner Diameter: 75mm / 3inch, Hole Diameter: 20mm / 0.79inch, Height: 35mm / 1.38inch
• White Aluminum Oxide Material - Made of quality white aluminum oxide, the flared cup has sharp edges and corners, good grinding effect, and less heat generation. It has high hardness, strong cutting force, wear resistance and long service life.