Mobile Phone Signal Boosters
5-10 of 400 results

DC12-36V 12 Channel PLC Amplifier Board,PLC Signal Amplifier Board,Isolation Relay Module,NPN Input PNP Output,Drilling,PCB Module Rack Installation

• PROTECT: Can be used to protect PLC internal relays;Effectively protected the output nodes of the PLC.
• EFFECTIVELY AVOID: Effectively avoid system instability caused by mutual interference.

Mopar Cover Isolator - 4884763AA

• Mopar Cover Isolator - 4884763AA

ISOLATED ERROR AMPLIFIER, 400KHZ, WSOIC, Isolation Amplifiers ICs (ADUM4190BRIZ) Pack of 1

DC Signal Isolator, 2 in 4 Out Current Signal Transmitter Less Interference Photoelectric Isolation Shockproof for Circuit Protection (0-10V)

4‑Channel RS485 Hub Sharer Splitter Industrial Grade Photoelectric Isolation Repeater Amplifier Converter

• Data flow automatic control technology, automatically distinguish and control the data transmission direction.
• Built‑in DC/DC isolated power supply module to achieve electrical isolation between ports.

Transmitter, 1 in 1 Out High Accurate Signal Isolation, for Two-Wire Transmitters Three-Wire Transmitters(DC4-20mA Input)

• Product channels are configured as one in, one out.
• Top open debugging, easy to fine-tune during installation and debugging.

High-Frequency RF Logarithmic Detector Power Meter - 1M-10GHz Detection Range

• [HIGH POWER DETECTION] - This power meter can detect RF signal power within the range of -55dBm to -0dBm. It converts the RF signal into a DC voltage output, allowing for easy power measurement and analysis.
• [ACCURATE SIGNAL DETECTION] - Designed with the advanced AD8317 chip, this RF logarithmic detector accurately measures RF signal power. It operates in a frequency range of 1M to 10GHz, making it suitable for a wide range of applications.

Transmitter, 1 in 1 Out Signal Isolation, Current Source for Two-Wire Transmitters Three-Wire Transmitters Transmitters(DC4-20mA Input)

• Product channels are configured as one in, one out.
• High accurate and fast response time.

Transmitter, 1 in 1 Out High Accurate Signal Isolation, for Two-Wire Transmitters Three-Wire Transmitters(DC0-10V Input)

• Product channels are configured as one in, one out.
• Top open debugging, easy to fine-tune during installation and debugging.

Voltage Regulator Module, 1000W Manual Adjustment 220V Voltage Regulation Board for Load(RS485)

• AC VOLTAGE REGULATOR: This module is used for regulating AC voltage, with high power of 1000W, practical and effective.
• MULTI FUNCTION: This AC voltage regulation board is multifunctional, which can be used to control serial port dimming, speed and temperature.

DC12-36V 12 Channel PLC Amplifier Board,PLC Signal Amplifier Board,Isolation Relay Module,NPN Input PNP Output,Drilling,PCB Module Rack Installation

• PROTECT: Can be used to protect PLC internal relays;Effectively protected the output nodes of the PLC.
• EFFECTIVELY AVOID: Effectively avoid system instability caused by mutual interference.

Mopar Cover Isolator - 4884763AA

• Mopar Cover Isolator - 4884763AA

ISOLATED ERROR AMPLIFIER, 400KHZ, WSOIC, Isolation Amplifiers ICs (ADUM4190BRIZ) Pack of 1

DC Signal Isolator, 2 in 4 Out Current Signal Transmitter Less Interference Photoelectric Isolation Shockproof for Circuit Protection (0-10V)

4‑Channel RS485 Hub Sharer Splitter Industrial Grade Photoelectric Isolation Repeater Amplifier Converter

• Data flow automatic control technology, automatically distinguish and control the data transmission direction.
• Built‑in DC/DC isolated power supply module to achieve electrical isolation between ports.

Transmitter, 1 in 1 Out High Accurate Signal Isolation, for Two-Wire Transmitters Three-Wire Transmitters(DC4-20mA Input)

• Product channels are configured as one in, one out.
• Top open debugging, easy to fine-tune during installation and debugging.

High-Frequency RF Logarithmic Detector Power Meter - 1M-10GHz Detection Range

• [HIGH POWER DETECTION] - This power meter can detect RF signal power within the range of -55dBm to -0dBm. It converts the RF signal into a DC voltage output, allowing for easy power measurement and analysis.
• [ACCURATE SIGNAL DETECTION] - Designed with the advanced AD8317 chip, this RF logarithmic detector accurately measures RF signal power. It operates in a frequency range of 1M to 10GHz, making it suitable for a wide range of applications.

Transmitter, 1 in 1 Out Signal Isolation, Current Source for Two-Wire Transmitters Three-Wire Transmitters Transmitters(DC4-20mA Input)

• Product channels are configured as one in, one out.
• High accurate and fast response time.

Transmitter, 1 in 1 Out High Accurate Signal Isolation, for Two-Wire Transmitters Three-Wire Transmitters(DC0-10V Input)

• Product channels are configured as one in, one out.
• Top open debugging, easy to fine-tune during installation and debugging.

Voltage Regulator Module, 1000W Manual Adjustment 220V Voltage Regulation Board for Load(RS485)

• AC VOLTAGE REGULATOR: This module is used for regulating AC voltage, with high power of 1000W, practical and effective.
• MULTI FUNCTION: This AC voltage regulation board is multifunctional, which can be used to control serial port dimming, speed and temperature.

DC12-36V 12 Channel PLC Amplifier Board,PLC Signal Amplifier Board,Isolation Relay Module,NPN Input PNP Output,Drilling,PCB Module Rack Installation

• PROTECT: Can be used to protect PLC internal relays;Effectively protected the output nodes of the PLC.
• EFFECTIVELY AVOID: Effectively avoid system instability caused by mutual interference.

Mopar Cover Isolator - 4884763AA

• Mopar Cover Isolator - 4884763AA

ISOLATED ERROR AMPLIFIER, 400KHZ, WSOIC, Isolation Amplifiers ICs (ADUM4190BRIZ) Pack of 1

DC Signal Isolator, 2 in 4 Out Current Signal Transmitter Less Interference Photoelectric Isolation Shockproof for Circuit Protection (0-10V)

4‑Channel RS485 Hub Sharer Splitter Industrial Grade Photoelectric Isolation Repeater Amplifier Converter

• Data flow automatic control technology, automatically distinguish and control the data transmission direction.
• Built‑in DC/DC isolated power supply module to achieve electrical isolation between ports.

Transmitter, 1 in 1 Out High Accurate Signal Isolation, for Two-Wire Transmitters Three-Wire Transmitters(DC4-20mA Input)

• Product channels are configured as one in, one out.
• Top open debugging, easy to fine-tune during installation and debugging.

High-Frequency RF Logarithmic Detector Power Meter - 1M-10GHz Detection Range

• [HIGH POWER DETECTION] - This power meter can detect RF signal power within the range of -55dBm to -0dBm. It converts the RF signal into a DC voltage output, allowing for easy power measurement and analysis.
• [ACCURATE SIGNAL DETECTION] - Designed with the advanced AD8317 chip, this RF logarithmic detector accurately measures RF signal power. It operates in a frequency range of 1M to 10GHz, making it suitable for a wide range of applications.

Transmitter, 1 in 1 Out Signal Isolation, Current Source for Two-Wire Transmitters Three-Wire Transmitters Transmitters(DC4-20mA Input)

• Product channels are configured as one in, one out.
• High accurate and fast response time.

Transmitter, 1 in 1 Out High Accurate Signal Isolation, for Two-Wire Transmitters Three-Wire Transmitters(DC0-10V Input)

• Product channels are configured as one in, one out.
• Top open debugging, easy to fine-tune during installation and debugging.

Voltage Regulator Module, 1000W Manual Adjustment 220V Voltage Regulation Board for Load(RS485)

• AC VOLTAGE REGULATOR: This module is used for regulating AC voltage, with high power of 1000W, practical and effective.
• MULTI FUNCTION: This AC voltage regulation board is multifunctional, which can be used to control serial port dimming, speed and temperature.

137M-4.4GHz RF Signal Source PLL Phase Locked Frequency Synthesizer ADF4350 Development Board

• This ADF4350 signal source development board has well designed circuit board layout.
• It can be controlled by the upper computer official software.

RF Mixer Module AD831 High Frequency Transducer 0.1‑500MHz Inverter Amplifier Board Converter for RF‑IF Down Conversion in HF and VHF Receivers

• EASY TO USE: The AD831 rf mixer module provides +24 dBm third‑order intercept point, which can achieve ‑10 dBm LO power consumption, no need for high‑power LO drivers, no corresponding shielding and isolation issues.
• GOOD PERFORMANCE: The mixer is designed for single power supply. The RF, IF and LO ports have DC isolation capacitors for easy use. The operating frequency of RF and LO inputs can be as high as 500MHz.

RF Microwave Double Balanced Mixer 1.5 to 4.5GHz RFout DC - 1.5GHz LO 312

• [Compact and Efficient] The double balanced design of this mixer allows for efficient mixing while maintaining a compact size. It requires higher drive levels, making it ideal for demanding RF applications.
• [Durable Connectors] Equipped with standard SMA female connectors, this mixer ensures reliable connections with most devices, making it suitable for a wide range of applications.

AD831 High Frequency Transducer RF Mixer Module 500MHz Bandwidth RF Frequency Converter

• 2. AD831 provides +24 dBm third-order , which can achieve -10 dBm LO consumption. It does not require high- LO drivers, and there is no corresponding shielding and isolation problems. Therefore, compared with passive mixers, it can System performance, reduce system cost. .
• 3. The mixer is designed to be powered by a single supply, and the RF, IF and LO ports have DC isolation capacitors for easy . The operating frequency of the RF and LO inputs can be as high as 500MHz. The IF output is a single-ended voltage output. It has an output bandwidth of 250 MHz.

Variable Frequency Drive VFD AC 220V 0.75kW Professional Speed Inverter Speed Controller (0.75KW 220V 5A L)

• UNIQUE CONTROL METHOD: This frequency converter uses a unique control method to achieve high torque, high accuracy and a wide range of speed control.
• ADVANTAGES: good anti-fall performance and ability to adapt to sudden power, temperature, humidity and dust disturbances.

AD831 High Frequency Radio Frequency Mixer, RF Module Radio Accessory Single Chip Single-Ended Power Supply High Frequency 0.1-500MHz

• With 250 MHz output bandwidth, a single resistor connected between pins OUT and feedback is used to set the gain. This amplifier has low DC offset characteristics, so it can be used for DC coupling applications such as DC-baseband frequency conversion an
• With 250 MHz output bandwidth, a single resistor connected between pins OUT and feedback is used to set the gain. This amplifier has low DC offset characteristics, so it can be used for DC coupling applications such as DC-baseband frequency conversion an

SPF5189 Radio Frequency Amplifier, RF Amplifier Module, Support Long Term Running, 5V Input Voltage

• Having excellent passing performance of both large and small currents, 50M‑400Mhz of the frequency range.
• Long term running can be achieved due to the large heat dissipation area,0.6dB of the noise factor.

Microwave Radio Frequency Double Balanced RF Mixer Frequency Mixer Dual Balanced RF Mixer Frequency Transducer RFin=1.5-4.5GHz RFout=DC-1.5GHz LO=312

• This is a double-balanced radio frequency mixer of RFin=1.5--4.5GHz, RFout=DC--1.5GHz, LO=312
• Double balanced mixers are more complex and require higher drive levels than unbalanced and single balanced designs

RF Microwave Double Balanced Mixer 1.5 to 4.5GHz RF to DC Converter LO 312

• [High Performance Rf Mixer] This double-balanced mixer operates in the frequency range of 1.5-4.5GHz, converting RFto DC output. With its LO frequency of 312, it ensures optimal performance.
• [ExcellentIsolation] The mixer features differential inputs, offering completeisolation and ensuring that only the desired productappears at the output. It eliminates interference for preciseprocessing.

Knadgbft AD831 High Frequency Transducer RF Mixer Module 500MHz Bandwidth RF Frequency Converter

• 1. AD831 is a low distortion, wide dynamic range, single-chip mixer, suitable for RF-IF down conversion in HF and VHF receivers, second mixer in base stations, DC-baseband conversion, and quadrature modulation And demodulation and frequency shift detection in ultrasound imaging and other applications
• 2. AD831 provides +24 dBm third-order point, which can achieve -10 dBm LO power consumption. It does not require high-power LO drivers, and there is no corresponding shielding and isolation problems. Therefore, compared with passive mixers, it can improve System performance, reduce system cost. .